다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

Why do the NTSC and PAL color bursts look different when displayed on a waveform monitor?

질문:

Why do the NTSC and PAL color bursts look different when displayed on a waveform monitor?

답변:

The NTSC color burst looks like two sine waves layed on top of each other and the PAL color burst looks like it has a lot of jitter. The NTSC color burst changes phase 180 degrees from frame to frame so four fields are required to repeat the original subcarrier to horizontal sync (SCH) phase relationship. As a result, the burst looks like two sine waves laid on top of each other 180 degress out of phase.

The PAL color burst changes phase 270 degrees from frame to frame so 8 fields are required to repeat the orginal SCH phase relationship, plus there is an additional 1/625 of a subcarrier cycle shift for each line in the frame. Consequently, the PAL color burst creates an envelope that is completely filled with overlapping sine waves which gives the impression that the color burst has jitter.


이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 59031

모든 FAQ 보기 »