다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

While setting up a trigger in Power Trigger mode+ how is a new state added before State 1?

질문:

While setting up a trigger in Power Trigger mode+ how is a new state added before State 1?

답변:

  1. Highlight state 1 in the Overview section of the trigger window. The Overview section is at the left section of the Trigger window.
  2. Right click on State 1 and "add state". New state is now after State 1.
  3. Right click on State 1 again and "cut state". New state is now in 1st position and original State 1 is cut out.
  4. Right click on State 1 again and "paste state". The new state is now before the original State 1.

이 FAQ는 다음에 적용 됩니다:

제품 시리즈: TLA7000 TLA7000 TLA7000

제품:

FAQ ID 58996

모든 FAQ 보기 »