다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

What is the difference between Step mode and Scan mode in the DMM Scan task in Excelinx-1A?

질문:

What is the difference between Step mode and Scan mode in the DMM Scan task in Excelinx-1A?

답변:

What is the difference between Step mode and Scan mode in the DMM Scan task in Excelinx-1A?

 

Step - This mode requires a trigger event to advance to each channel in the scan list. In this mode the reading count is the total number of readings.

Scan - This mode requires a trigger event to advance to each scan. In this mode the reading count is the number of scans.

Suppose the scan list is set for 10 channels and the reading count is set for 10.

If in Step mode, 10 triggers would be required to go through all the channels in the scan list. Then the task would be complete. A total of 10 measurements would have occured.

If in Scan mode, each trigger would allow each channel in the scan list be to measured. But 9 more triggers would need to occur before the task would be complete. A total of 100 measurements would have occured.


이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 71901

모든 FAQ 보기 »