연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

What is the best way to measure frequency with a digital oscilloscope?

질문:

What is the best way to measure frequency with a digital oscilloscope?

답변:

Digital Storage Oscilloscopes (DSOs) or Digital Real-Time oscilloscopes (DRTs) all measure frequency by calculating it from the waveform period (1/period = frequency). The period is found by determining the mid-point between the maximum and minimum waveform values, and measuring the time from the first mid-point in the waveform data to the third mid-point.

All digital oscilloscopes have a horizontal resolution limit. The limit is determined by the maximum record length available. The record length is the number of horizontal points in the digitized waveform. One over the record length (1/record length) is the resolution limit for period and frequency measurements.

To make the most accurate period and frequency measurement, make sure that you are using all the resolution available. Use the longest possible record length, then select the horizontal scale that uses the most record length for the period and frequency measurements. Use signal averaging or HiRes mode to remove noise and use the greatest amplitude possible. This helps the oscilloscope accurately determine the mid-point values and positions, and the best waveform period and frequency measurements.

Learn the XYZ's of Oscilloscopes »


이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 61206

모든 FAQ 보기 »