다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

What battery can I use to replace BA-24 in my 600B or 602 Electrometer?

질문:

What battery can I use to replace BA-24 in my 600B or 602 Electrometer?

답변:

What battery can I use to replace BA-24 in my 600B or 602 Electrometer?
Install an alkaline AA cell in place of BA-24. Of course this will not fit in the battery holder so it will be necessary to solder lead wires on the AA cell and then solder to the holder.

Since the BA-24 was 1.35V and the alkaline cell is 1.5V it will be necessary to change three resistors:

  • R143 from 3.48kohm to 4.99kohm
  • R113 from 135kohm to 150kohm
  • R155 from 1.5kohm to 1.67kohm

The BA-24 cell is used for Ohms function only and can be removed completely if only Volts, Amps, and Coulombs are being measured.

On the other hand, if the Ohms mode is functional, it can also serve as a low constant-current source, 10uA to 1pA in decade steps.


이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 69851

모든 FAQ 보기 »