다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

In order to configure my 2701, How can I display my network settings for my computer?

질문:

In order to configure my 2701, How can I display my network settings for my computer?

답변:

Product(s) :
Integra Mainframe: 2701


Question : How can I display my network settings for my computer?


Answer:

The easiest method is to use the command window and type in a command that will display that information for you. This is a simple process that is listed below.

Windows 95

· Go to the command prompt by clicking on the start button, then select run. When the run window comes up, type in "command" the select OK. The MS-DOS prompt should now come up. At the prompt, type in "winipcfg" then hit the enter key.

· A window should now be displayed that has your network settings. There is a drop down box that will contain each network card that you have installed. Make sure you have selected the one that you will use to connect to the 2701.

 

Windows 98/ME/2000/XP

· Go to the command prompt by clicking on the start button, then select run. When the run window comes up, type in "command" the select OK. The command prompt should now come up. At the prompt, type in "ipconfig" then hit the enter key.

· In the command window, you should now see displayed the network settings for all of you installed network cards.

 


©Copyright 2003, Keithley Instruments, Inc.


이 FAQ는 다음에 적용 됩니다:

제품 시리즈: Keithley 2700 멀티미터/데이터 획득/스위치 시스템

제품:

FAQ ID 71711

모든 FAQ 보기 »