연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의 1-800-833-9200

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

I plugged in a data acquisition board into the PC and the board does not respond. What is wrong?

질문:

I plugged in a data acquisition board into the PC and the board does not respond. What is wrong?

답변:

One possible problem is that the board's base address is incorrect. Make sure that any base address switches that are on the board are set correctly and that your program references the same base address. If your board is plug-and-play compatible, make sure the assigned base address is a valid address. If the base address is set correctly, make sure no other computer device is using any of the I/O locations beginning at the specified base address. Another possible cause is that the chosen interrupt level is incorrect. Again, make sure that no other computer device is using the same interrupt level specified in your program. Lastly, make sure the board is correctly aligned in the card slot of the PC. The card must be seated properly in the socket and making good electrical connection with the socket.

이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 70671

모든 FAQ 보기 »