Can you use NI Signal Express Tektronix Edition to connect an oscilloscope with an IVI-C driver?
You can connect to the TDS3000 Series Oscilloscopes using IVI Instrument Steps in SigExpTE (National Instruments Signal Express Tektronix Edition) software.
Required software is SigExpTE (National Instruments Signal Express Tektronix Edition) and the TDS3000 IVI driver available from National Instruments Instrument Driver Network
Use the 10 step process documented in National Instruments Signal Express application note to setup and acquire waveforms.
이 FAQ는 다음에 적용 됩니다:
제품 시리즈 없음
FAQ ID 63341모든 FAQ 보기 »