How do I utilize the XY display feature on a DPO/MSO/MDO4000 Series oscilloscope?

Question:

How do I utilize the XY display feature on a DPO/MSO/MDO4000 Series oscilloscope?

Answer:

The XY display format can be used to measure the phase relationship between two or more synchronous signals. This measurement technique involves inputting one signal into the vertical system as usual and then another signal into the horizontal system – called an XY measurement because both the X and Y axis are tracing voltages. The waveform that results from this arrangement is called a Lissajous pattern (named for French physicist Jules Antoine Lissajous and pronounced LEE–sa–zhoo). From the shape of the Lissajous pattern, you can tell the phase difference between the two signals. You can also tell their frequency ratio. The figure and video below both show Lissajous patterns for various frequency ratios and phase shifts as well as demonstrate some of features on the Tektronix oscilloscope. 

Thumbnail

 

This FAQ Applies to:

Product Series: MSO/DPO70000, MSO2000B / DPO2000B, MSO3000 / DPO3000, MSO4000 / DPO4000, MSO5000 / DPO5000, MDO3000, MDO4000

Product: DPO2002, DPO2012, DPO2014, DPO2024, DPO3012, DPO3014, DPO3032, DPO3034, DPO3052, DPO3054, DPO4032, DPO4034, DPO4034B, DPO4054, DPO4054B, DPO4102B, DPO4102B-L, DPO4104, DPO4104B, DPO4104B-L, MSO2002, MSO2012, MSO2014, MSO2024, MSO3012, MSO3014, MSO3032, MSO3034, MSO3054, MSO4032, MSO4034, MSO4034B, MSO4054, MSO4054B, MSO4102B, MSO4102B-L, MSO4104, MSO4104B, MSO4104B-L, MDO3012, MDO3014, MDO3022, MDO3024, MDO3032, MDO3034, MDO3052, MDO3054, MDO3102, MDO3104, MDO3AUTO, MDO4014-3, MDO4014B-3, MDO4024C, MDO4034-3, MDO4034B-3, MDO4034C, MDO4054-3, MDO4054-6, MDO4054B-3, MDO4054B-6, MDO4054C, MDO4104-3, MDO4104-6, MDO4104B-3, MDO4104B-6, MDO4104C

FAQ ID : 64666

View all FAQs »
다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

Go to top