How do I update the firmware on my TDS2000 series oscilloscope

Question:

How do I update the firmware on my TDS2000 series oscilloscope?

Answer:

The firmware update process is fairly simple and is outlined in the video below. The following link will allow you to view it in YouTube if it doesn't show up below. http://youtu.be/Y5nfnxx57Z8 

In many cases, updating the firmware can fix functional problems with the scope. This method is valid for the TDS1000 and TDS2000 series oscilloscopes.

Go to Utilities>-more->File Utilities>-more->Update Firmware. This brings you to a screen with instructions on how to update the firmware. Take note of the current firmware installed on the scope and go find the most recent firmware for the scope on our website using the search bar. For example, if you're looking for the firmware update for a TDS2024C, type TDS2000C firmware into the search bar and click GO. Follow the link for the most recent firmware, click download, unzip the downloaded file, and place the file with the .TEK extension in the top level of a USB flash drive. Plug this drive into the front of the scope and press Update Firmware. The scope will reboot and go into the update cycle. Leave it alone until it's finished and then you can use the scope normally with the new firmware installed.

 

This FAQ Applies to:

Product Series: TDS2000C

Applications: Education

FAQ ID : 66196

View all FAQs »
다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

Go to top