다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

How do I measure the offset current of my picoammeter or electrometer?

질문:

How do I measure the offset current of my picoammeter or electrometer?

답변:

The offset current of a picoammeter or electrometer is the current measured with no circuit connected to the input. To measure the offset current, turn the power on and allow the instrument to warm up for the time specified in the manual. Place a shield cap over the input connector. Connect the LO input terminal to ground (if your instrument has these terminals). Set the meter to the most sensitive current range and disable the zero check switch. After a few seconds, the meter readings should settle to within a few digits. This settled reading is the input offset current. This reading should be compared to the specification in the instrument's manual. If the offset current is too high, the instrument probably needs recalibration.

이 FAQ는 다음에 적용 됩니다:

제품 시리즈: Keithley 시리즈 6400 피코암미터

제품:

FAQ ID 71736

모든 FAQ 보기 »