다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

How do I configure my embedded audio to be played out the analog outputs of a WFM/WVR series instrument?

질문:

How do I configure my embedded audio to be played out the analog outputs of a WFM/WVR series instrument?

답변:

There are two key steps required to map embedded audio channels to the analog outputs on a WVR or WFM series instrument (see below):

image1

First, you need to configure the Bar-To-Input map to assign a level bar to each embedded channel (see below). Use the arrow keys and the select key to check the check boxes that correspond to the bars and inputs you want connected.

image2

Second, you need to configure the Analog Output map to assign each level bar to an analog output (see below). Use the arrow keys and the select key to check the check boxes that correspond to the bars and outputs you want connected.

image3

Once these steps are completed, you should be able to hear an analog downmix of your embedded audio on the analog output connectors of the instrument.

 


이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 62636

모든 FAQ 보기 »