다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

In the Eye Pattern configuration menu Mode+ what is the difference between overlay and 10? Obviously it shows more eyes+ but what else is changed?

질문:

In the Eye Pattern configuration menu Mode+ what is the difference between overlay and 10? Obviously it shows more eyes+ but what else is changed?

답변:

In OVERLAY the eye pattern time base is triggered so that bits 0-9 are overlaid. This shows peak jitter at each eye crossing. 10-EYE triggers the time base on parallel word boundaries, so bits 0-9 are shown sequentially. In a perfect world both modes would show the same jitter, but some systems show eye-crossing modulation at 2 and 5 times the parallel word rate. 10 EYE helps show this if it is present. OVERLAY is recommended for making jitter measurements with the eye pattern. See the WFM601M user manual for a discussion on OVERLAY and 10-EYE.

이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 59636

모든 FAQ 보기 »