Do the existing MSO/DPO/MDO4000/B Series application modules work with the MDO4000C?
Yes, almost all work from all legacy MSO/DPO/MDO4000/B series scopes. The only one that has some requirements is the MDO4TRIG which requires a spectrum analyzer option MDO4SA3 or MDO4SA6 be installed on your MDO4000C before RF triggering capabilities would work. Otherwise all modules are compatible on this new oscilloscope. |
Note: MSO/DPO/MDO3000 Series modules are not compatible on the 4000 Series.
Note 2: ≥350 MHz bandwidth models are recommended for 100BASE-TX; USB high-speed supported only on models with 1 GHz analog channel bandwidth.
For further questions, please reach out to our Technical Support Center by pressing the 'Contact Us' button on the right of the screen.
FAQ ID 72146모든 FAQ 보기 »