다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

Can the Model 776/2.4G be converted Model 776/2.4G/R or visa versa?

질문:

Can the Model 776/2.4G be converted Model 776/2.4G/R or visa versa?

답변:

Product(s): 776, 776/2.4G, 776/2.4G/R


Question:Can the Model 776/2.4G be converted Model 776/2.4G/R or visa versa?


Answer: No, the “Model” cannot be converted. However, the command protocol (DDC versus SCPI) can be converted with a firmware change. The command protocol, DDC (Device Dependant Commands) or SCPI (Standard Commands for Programmable Instrumentation) can be converted both ways: from DDC to SCPI or from SCPI to DDC.

The firmware conversion addresses only the command protocol. It does not address the rear panel versus front panel inputs or factory default differences.

Firmware versions 1.X and 2.X can be installed in the field. Version 3.X and higher should contact Keithley for conversion information.

Contact your closest Keithley Service Center for return authorization and information on these firmware changes.


©Copyright 2003, Keithley Instruments, Inc.


이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 69806

모든 FAQ 보기 »