연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의 1-800-833-9200

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

Can I Edit Waveforms On The AWG Using Instrument Commands?

질문:

Can I Edit Waveforms On The AWG Using Instrument Commands?

답변:

It depends on which AWG you are using:

For AWG5000, AWG5000B, AWG7000, AWG7000B Series Instruments

Yes. These series of instruments have remote instrument commands to modify waveform lengths, sample values, and marker values.

For AWG2000, AWG400, AWG500, AWG600, AWG700, AWG700B Series Instruments

No. These series of instruments are lacking remote instrument commands to modify waveform lengths, sample values, or marker values. The best way to modify a waveform on these instruments is to copy the target waveform data onto the remote PC, preform the desired modifications, and then transfer the modified waveform back to the AWG. Alternatively, front panel buttons can be emulated via the ABSTOUCH commands. Using ABSTOUCH commands are not recommend because the interface state cannot be queried remotely.


이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 55256

모든 FAQ 보기 »