다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

Can an AWG use a Matlab or Mathcad waveform file directly?

질문:

Can an AWG use a Matlab or Mathcad waveform file directly?

답변:

The AWG products do not have the ability to use a native Matlab or Mathcad file directly. However, they have a built in conversion tool that will take a columnar ASCII file (Y values separated by LF/CR) and convert it to the WFM or PAT formats that the AWG can use.

There is a Windows based utility that can be downloaded off of the Tektronix web site that will do the same thing, but can do multiple files at once. You would then copy the converted files to your AWG using a floppy disk, FTP or GPIB. Below is the link to the Windows based utility.
CONVERSION UTILITY FOR AWGS

You can use ArbExpress software to import the ASCII data and then save it in the native AWG format or send the waveform to the instrument via GPIB or Ethernet. Below is a link to ArbExpress (AXW100)
ArbExpress

Another possibility is to use the WFM and PAT file format documentation at the end of the Command Description section of the programmer


이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 58066

모든 FAQ 보기 »