질문:
On the AVG1 module+ what parameters of the signal can be changed+ and what is the range of these changes?
답변:
There are many signal parameters that can be changed. The table below shows these parameters and the range of variation.
| Range For: | Resolution | |||||
| NTSC | PAL | |||||
| Parameter | Low | High | Low | High | ||
| Overall Gain (%) | 0 | 135.1 | 0 | 127.4 | 0.10% | |
| Active Video Gain (%) | 0 | 135.1 | 0 | 127.4 | 0.10% | |
| Luma Amplitude (%) | 0 | 143.0 | 0 | 146.0 | 0.10% | |
| Chroma Gain (%) | 0 | 135.1 | 0 | 127.4 | 0.10% | |
| Active R-Y Gain (%) | 0 | 135.1 | 0 | 127.4 | 0.10% | |
| Active B-Y Gain (%) | 0 | 190.3 | 0 | 179.8 | 0.10% | |
| Burst Amplitude (%) | 0 | 550.0 | 0 | 525.0 | 0.10% | |
| Sync Amplitude (%) | 0 | 210.0 | 0 | 200.0 | 0.10% | |
| Pedestal Amplitude (mv) | -1000 | 1000 | -1000 | 1000 | .1 mv | |
| Chroma Phase Offset (deg) | -179.9 | 180.0 | NA | NA | .1 Deg | |
| SCH Phase (deg) | -179.9 | 180.0 | -179.9 | 180.0 | .1 Deg | |
| Fsc Frequency Offset (Hz) | -1789772.7 | 1789772.7 | -2216809.3 | 2216809.3 | .1 Hz | |
| Time Base Offset (PPM) | -50000 | 50000 | -50000 | 50000 | .01ppm | |
| GBR | YPBPR* | SECAM | ||||
| Low | High | Low | High | Low | High | |
| Overall Gain:Mstr (%) | 0 | 146 | 0 | 143 | 0 | 118 |
| Overall Ampl:Ch1 (%) | 0 | 146 | 0 | 143 | 0 | 118 |
| Overall Ampl:Ch2 (%) | 0 | 146 | 0 | 174 | 0 | 1000 |
| Overall Ampl:Ch3 (%) | 0 | 146 | 0 | 174 | 0 | 1000 |
| Active Video Gain:Mstr (%) | 0 | 146 | 0 | 143 | 0 | 118 |
| Active Video Ampl:Ch1 (%) | 0 | 146 | 0 | 143 | 0 | 118 |
| Active Video Ampl:Ch2 (%) | 0 | 146 | 0 | 174 | 0 | 1000 |
| Active Video Ampl:Ch3 (%) | 0 | 146 | 0 | 174 | 0 | 1000 |
| Sync Gain:Mstr (%) | 0 | 200 | 0 | 210 | 0 | 200 |
| Sync Ampl:Ch1 (%) | 0 | 200 | 0 | 210 | 0 | 200 |
| Sync Ampl:Ch2 (%) | 0 | 200 | 0 | 1000 | 0 | 1000 |
| Sync Ampl:Ch3 (%) | 0 | 200 | 0 | 1000 | 0 | 1000 |
| Pedestal Gainl:Mstr (mv) | -1000 | 1000 | -1000 | 1000 | -1000 | 1000 |
| Pedestal Ampl:Ch1 (mv) | -1000 | 1000 | -1000 | 1000 | -1000 | 1000 |
| Pedestal Ampl:Ch2 (mv) | -1000 | 1000 | -1000 | 1000 | -1000 | 1000 |
| Pedestal Ampl:Ch3 (mv) | -1000 | 1000 | -1000 | 1000 | -1000 | 1000 |
Notes:
1. All ranges specified with 100% color bars for signal
2. Gain ranges vary with the signal.
3. Each setting is done with all others nominalized
* Measured with 525 Beta
이 FAQ는 다음에 적용 됩니다:
제품 시리즈 없음
제품:
FAQ ID 63906
모든 FAQ 보기 »