다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

TPS2000

최대 200MHz의 대역폭 및 2GS/s의 샘플링 속도가 지원되는 TPS2000B 디지털 스토리지 오실로스코프 시리즈를 통해 까다로운 여러 환경에서 안전하게 플로팅 작업이나 디퍼런셜 측정을 수행할 수 있습니다. 최대 4개의 격리된 채널과 휴대용 배터리로 구동이 가능한 TPS2000B 디지털 스토리지 오실로스코프 시리즈는 안전을 염두에 두고 설계되었기 때문에 전자 및 전력 시스템 분야에서 직면하는 어려운 문제를 정확하고 신속하게 해결할 수 있습니다.

대역폭

최대 200 MHz

아날로그 채널

2 또는 4
격리

레코드 길이

2.5k 포인트

배터리

 

특징

장점

4개의 격리된 채널 3상 파워 측정 작업을 포함한 4채널 플로팅 측정 작업을 쉽고 안전하게 수행합니다.
디지털 실시간 샘플링 모든 채널에서 항상 최소 10배 오버샘플링으로 신호를 정확히 캡처합니다.
전면 패널의 전용 컨트롤 전면 패널 컨트롤을 통해 학습 시간을 줄이고 작업에 보다 많은 시간을 투자할 수 있습니다.
전면 패널의 CompactFlash™ 포트 파형을 신속하게 저장 및 전송할 수 있습니다.
핫 스왑 가능 배터리 팩 최대 8시간의 연속 배터리 작동**으로 필요한 곳에서 작업할 수 있습니다.
2.7kg(6lbs) 경량 가벼운 초소형 제품으로 실험실 간 또는 필드로의 이동이 용이합니다.
파워 측정 및 분석 애플리케이션 모듈(옵션) 실제 및 피상 전력, 위상 각도 측정, 고조파 및 스위칭 손실을 자동으로 신속하게 측정할 수 있습니다.
PC 연결 RS-232 포트 및 포함된 USB 어댑터 케이블을 사용하여 개인 컴퓨터에 쉽게 연결할 수 있습니다. NI LabVIEW SignalExpress 소프트웨어를 사용하면 오실로스코르 및 로그 데이터를 제어하고 결과를 간편하게 전송 및 문서화할 수 있습니다.

** 1개의 배터리가 표준으로 제공되며, 각 배터리는 4시간 작동합니다.

모델 아날로그 대역폭 샘플링 속도 레코드 길이 아날로그 채널 정가
TPS2012B 100MHz 1GS/s 2.5K 포인트 2 US $4,210
구성 및 견적
TPS2014B 100MHz 1GS/s 2.5K 포인트 4 US $5,570
구성 및 견적
TPS2024B 200MHz 2GS/s 2.5K 포인트 4 US $5,820
구성 및 견적
모델 아날로그 대역폭 샘플링 속도 레코드 길이 아날로그 채널 정가
TPS2012B 100MHz 1GS/s 2.5K 포인트 2 US $4,210
구성 및 견적
TPS2014B 100MHz 1GS/s 2.5K 포인트 4 US $5,570
구성 및 견적
TPS2024B 200MHz 2GS/s 2.5K 포인트 4 US $5,820
구성 및 견적
데이터 시트 소프트웨어 패키지/소프트웨어 옵션 설명 구성 및 견적 요청
TPS2000B Series
Oscilloscope Safety and Compliance

This manual contains compliance and safety information for the TPS2000B Series Digital Storage Oscilloscopes.


부품 번호: 071354302
사용자 Manual
Read This First
TPS2000B Series Oscilloscopes available documentation and applications

This document lists the available documentation and applications for the TPS2000B Series Digital Storage Oscilloscopes.


부품 번호: 061442600
사용자 Manual
TPS2000B Series
Digital Storage Oscilloscopes

This service manual provides information to verify performance of, calibrate, troubleshoot, disassemble, and replace parts on the TPS2000B Series Digital Storage Oscilloscopes.


부품 번호: 077044702
서비스 Manual
TPS2000B Series
Oscilloscope Safety and Compliance

This manual contains compliance and safety information for the TPS2000B Series Digital Storage Oscilloscopes.


부품 번호: 071354300
사용자 Manual
TBS1000, TBS1000B/TBS1000B-EDU, TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope Declassification and Security Instructions Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the TBS1000, TDS1000B, TDS2000B, TDS1000C-EDU, TDS2000C, and TPS2000B Series Digital Storage Oscilloscopes
부품 번호: 077077102
기밀 해제 Manual
TBS1000B, TBS1000, TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TDS2024C, TPS2000/TPS2000B Series
Digital Oscilloscope Programmer Manual

This document describes commands that can be used to remotely control the product.
부품 번호: 077044403
프로그래머 Manual
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

부품 번호: 066093812
드라이버
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

부품 번호: 066093811
드라이버
Tektronix Openchoice Desktop Application TDSPCS1 - v2.6
The Tektronix OpenChoice Desktop free application lets you capture oscilloscope screen images, waveform data, and settings from a Microsoft Windows computer. After installing the software, refer to the section “Connecting to a PC” in your …

부품 번호: 066093914
유틸리티
Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC …

부품 번호: 066133202
유틸리티
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

부품 번호: 066093809
드라이버
LabVIEW SignalExpress Step for TDS1000B, B-SC, C, C-EDU, TDS2000B, C
This Step provides the capability to connect, control and log data from the TDS1000B, B-SC, C and C-EDU; TDS2000B and C; and TPS2000B series instruments from the Signal Express Environment.

부품 번호: 066130301
애플리케이션
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …

참고자료 번호: 46W-31080-7
선택 가이드 Marketing Document
Fundamentals of Floating Measurements and Isolated Input Oscilloscopes
This guide will provide you with a fundamental glossary of power measurement terms, explain the different options available for making floating measurements, and highlight the advantages and trade-offs of each option.

참고자료 번호: 3AW-19134-2
애플리케이션 노트 Marketing Document
I need a printer which will work with the TPS2000 series. Which one should I purchase?
An alternate method to using a printer with a Centronics port is purchase a printer which can read a compact flash card. Then you can save your pictures to TPS2000 compact flash card then print them direct from the printer, no cable required. The …
FAQ ID57401 Faq
What is the charging time for the TPS2000 series batteries?
Batteries can be charged either in the instrument or in the optional TPSCHG external charger. In the external charger, a battery will charge in 3 hours. When AC power is supplied to the TPS2000, a battery will charge in about 4.5 hours if the …
FAQ ID58736 Faq
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
FAQ ID64791 Faq
Is the Windows 7 driver for the RS232 to USB cable adapter (p/n:174-5813-00) available?
The driver for the adapter 174-5813-00 for Windows 7 support is available from its chip vendor at here. 
FAQ ID64476 Faq
On the TPS2000+ when do I use the multipurpose knob and when do I press the bezel buttons to change settings?
You use the multipurpose knob when the indicator light associated with the knob is lit (e.g., cursor position in the cursor menu). If the light is not lit, select on or off operations by pressing the bezel button (e.g., measurement type in the …
FAQ ID58556 Faq
Can Tektronix Digital Storage Oscilloscopes export XY Display mode waveform data in a single file?
Tektronix Digital Storage Oscilloscopes XY Display mode waveform data is displayed by taking the voltage amplitude portion of the real-time YT voltage vs. time waveforms simultaneously acquired on channel 1 and channel 2 (or channel 3 an 4 on some …
FAQ ID59141 Faq
Does turning off the TPS2000 front-panel backlights make the batteries last longer?
Yes, but only about 10 minutes longer.
FAQ ID58216 Faq
How do I upgrade the TPS2000 series oscilloscope firmware?
UPGRADE PROCEDURE You will need a CompactFlash reader and a CompactFlash card connected to your computer. Download this version of firmware to your PC by pressing the "Download" button on the Firmware Update for the TPS2000 Series page and following …
FAQ ID57346 Faq
Why does OpenChoice Desktop "Get Screen" operation time-out and display "Data transfer ended unexpectedly", when “Select Instrument”, “Get Data”, “Get & Send Settings” operations are successful?
When connecting to a TPS2000/B, TDS1000, TDS2000, or TDS3000/B series scopes with a Centronics parallel printer port using direct RS232, or RS232 to USB adapter, you must set the scope’s Printer Port to “RS232” (TDS1000/2000, TPS2000/B; Utility …
FAQ ID64806 Faq
My TPS2024 with the Power Application module installed the Harmonics selection does not properly measure the harmonics on my waveform.
The following shows an example of a waveform with harmonics. If the secondary frequency is not an exact multiple of the fundamental the scope may display mixed results. The recommendation is to change the Setup selection in the Harmonics menu from …
FAQ ID58541 Faq
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
FAQ ID60306 Faq
I have a previous version of Open Choice Desktop software loaded on my PC. Do I need a new version to work with the TPS2000?
You can upgrade the software by using the version supplied with the TPS2000 oscilloscope.You can also download an upgraded version of the Open Choice Desktop from the Tektronix Web site. (This contains two distinct pieces of software: TekVISA and …
FAQ ID58366 Faq
Does the TPS2000 Series use an industry-standard battery (available locally)?
No. To ensure proper instrument performance, you should purchase the batteries only from Tektronix.
FAQ ID58211 Faq
Are the TPS2000 oscilloscope BNC inputs (and external trigger) isolated from the I/O ports on the back of the instrument?
Yes. For example, you can use OpenChoice® PC connectivity software with the TPS2000 series while making floating measurements (within the specified instrument and probe limits), and the optional WaveStar software can be used for fully programmable …
FAQ ID58046 Faq
What is the difference between digital real-time (DRT) sampling technology used in the TPS2000 Series and equivalent time sampling (ET) technology used by other manufacturers in the market?
Sample rate determines the highest frequency that can be captured in a single shot. For linear interpolation, the rule of thumb is that the sample rate must be 10 times higher than the highest frequency to be captured for a waveform to be reproduced …
FAQ ID58751 Faq
Are Tektronix current probes compatible with the TPS2000 series oscilloscopes?
Yes, here is the list for the recommended current probes. A621 5 - 50 kHz AC current probe, 2000A A622 DC - 100kHz AC/DC current probe, 100A P6021 120Hz - 60 MHz AC current probe, 15A P6022 935 Hz - 120MHz AC current probe, 6A TCP202 (requires 1103 …
FAQ ID58041 Faq
Is the isolation maintained when using the AC Adapter?
Yes. Full isolation is maintained.
FAQ ID58501 Faq
I have never used an isolated channel oscilloscope+ what advantage can I expect to gain from it?
The TPS2000 Series 4 IsolatedChannel™ input architecture provides true and complete channel-to-channel isolation for both the positive input and the negative reference leads, including the external trigger input. Refer to the IsolatedChannel …
FAQ ID58386 Faq
How do I turn the TPS2000 front-panel backlight on or off?
Press the Utility menu button and then the Options bezel button. The top bezel button toggles the backlight on and off.
FAQ ID58296 Faq
When the TPS2000 series scope is plugged into an AC power source+ there is no indication that the unit is running on AC power. Is this also true when the unit is running on its battery?
When the unit is plugged into AC power, there is no indicator light. However, there is an indicator light on the unit when the battery is being charged in the instrument (i.e., the instrument is connected to AC power and the battery[ies] is [are] not …
FAQ ID58946 Faq
Do I have to put the battery in slot 1 if I'm using only one battery?
No, the two slots are identical.
FAQ ID58146 Faq
On my TPS2000 series oscilloscope the BNCs are damaged or worn out.  Can I replace them myself?
Yes, you can replace them.  Order a BNC replacment kit Tektronix part number 050374800 for a TPS2000B series or order 050359800 if it is a TPS2000 non-B series.  The kits includes instructions for replacement. You can also view the video below which …
FAQ ID64861 Faq
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
FAQ ID474266 Faq
What are the TDS2000B TV-sync triggering selections and which Standards are supported? Are these features optional or are they provided with the instrument?
The TDS2000B TV sync selections are Line Number, Odd field, Even field, All Fields and All Lines. The supported Standards are NTSC and PAL/SECAM. There is no TV trigger option available and no additional cost for these features. The TV trigger …
FAQ ID64041 Faq
Is there a special operating mode that enables me to get 8 hours of battery operation in the TPS2000 Series?
No, there is no low-power setting as on some products because TPS2000 monitors the remaining battery life. With two fully charged batteries, the product can operate for up to 8 hours even with the front panel backlights operating. In addition, the …
FAQ ID58511 Faq
How high can I float the TPS2000 series oscilloscopes?
The input to the scope can accept up to 600 VRMS CAT II or 300 VRMS CAT III BNC shell to earth ground, 1200 VRMS CAT II between any two channel commons with each of the channel commons not being more than +/- 600 VRMS from earth ground. The P2220 …
FAQ ID58321 Faq
Do you offer a RS232 to a USB cable adapter?
Yes.  This can be ordered as part number 174-5813-00.
FAQ ID64446 Faq
How do I declassify or sanitize my instrument?
Declassification and Security documents for many Tektronix products are located in the Download, Manuals and Documentation on Tek.com.  /node/7106.  Enter your instrument model number and select Download Type as "Manuals".  At the results screen, on …
FAQ ID55686 Faq
In reference to the TPS2000 + what do you mean by "hot-swappable" batteries?
While the product is running on one battery, you can install another fully charged battery without having to turn off the oscilloscope or interrupt normal operation. (The oscilloscope drains only one battery at a time and the lowest-capacity battery …
FAQ ID58451 Faq
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …
FAQ ID63266 Faq
Does the P2220 probe replace the P2200 probe?
Yes. The P2220 probe is compatible with TDS1000 and TDS2000 Series as well as the TPS2000 Series. The P2200 probe and other standard single-ended passive probes cannot be used with the TPS2000 Series because safe operation of the TPS2000 Series …
FAQ ID58196 Faq
How do I know how much battery charge is left in the TPS2000 batteries?
There is a Battery Status menu found under the Utility menu System status. Notes indicate whether battery 1 and battery 2 are installed and the time remaining on each battery.
FAQ ID58281 Faq
The TPS2000 series scope is powered by rechargeable batteries+ is a battery charger included with the scope?
The batteries are charged by the scope internally when it is connected to the AC outlet. There is an external charger available but it is not included with the scope. The part number is TPSCHG, ( External battery charger for TPS2000 Series …
FAQ ID58581 Faq
Why does Math work differently between my older TDS200 or TDS1000/2000 series oscilloscope+ and my newer TDS1000B/2000B series oscilloscope?
The way to calculate math was different in the older TDS200 and TDS1000/2000 series oscilloscopes then most other oscilloscopes, including the new TDS1000B/2000B series.The older instruments used a method that could be called Display Math. In Display …
FAQ ID64386 Faq
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
FAQ ID64561 Faq
Do you offer a RS232 to a USB cable adapter?
Yes.  This can be ordered as part number 174-5813-00.
FAQ ID59281 Faq
My TPS2000 scope was running FV:V10.14 and I updated to FV:V10.20. I notice the cooling fan is running much faster now. Is this situation correct?
Yes, the fan has 3 speeds: fast, slow, and off. With the new firmware there were changes made to the fan algorithm. Also when the instrument is powered up the fan start up is at high speed. Speed changes can be adjusted once a minute. The scope …
FAQ ID57566 Faq
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689 …
FAQ ID64571 Faq
Can the trigger signal frequency readout provide frequency measurements greater than the rated bandwidth of the oscilloscope?
Yes; however, this depends on the available signal strength.
FAQ ID58131 Faq
I have a TDS3034B with the battery and charger. Can I use this battery and charger with the TPS2000 scopes?
No, the batteries and charger for the TDS3000 and TDS3000B series will not work with the TPS2000 series. The TPS2000 series batteries and the charger are unique and are designed specifically for this series.
FAQ ID58371 Faq
Can I download waveform data and screenshots to my computer by using HyperTerminal?
Yes you can. Use the first procedure to get waveform data, and the second to get a screenshot. For both Waveform data and screenshots, setup Hyperterm for communication. If you want to see the characters you type in the window (recommended), then you …
FAQ ID58076 Faq
Can I look at and measure an instantaneous power waveform?
With the TPS2000's math multiply function, you can easily multiply a voltage and current waveform to obtain an instantaneous power waveform. You can independently scale this math waveform for optimized viewing. In addition, you can make power …
FAQ ID58081 Faq
On the TPS2000+ where is the trigger point when the pulse width trigger is used and a specified amount of time is selected?
Equal: Oscilloscope triggers when trailing edge of the pulse crosses the trigger level. Not equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues …
FAQ ID58561 Faq
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
FAQ ID63686 Faq
What operating system does the TDS1000B+ TDS2000B+ TPS2000+ MSO/DPO2000+ TDS3000C+ MSO/DPO3000 and MSO/DPO4000 use? And are they susceptible to viruses?
The above oscilloscopes use closed embedded real-time operating systems and do not have the capability to create, modify, run or save programs that are on a USB device or LAN .  Therefore, they are not susceptible to virus attacks and cannot spread …
FAQ ID56996 Faq
Can I convert my wfm files to an open format+ such as a CSV (comma separated values) file?
You can use one of the following three WFM to ASCII converters. Converter for TDSxxx - works with files created by TDSx00 series (for example, TDS500 series) Converter for TDS5xxx,TDS6xxx, TDS7xxx, DPO7xxx,DPO70xxx, DSA70xxx Converter for the …
FAQ ID56386 Faq
Can I operate the TPS2000 series oscilloscope on AC power without a battery installed?
Yes. The AC adapter supplies 15V DC to power the instruments so that no battery is required.
FAQ ID58091 Faq
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
FAQ ID64251 Faq
I can not get a screenshot of the full trace in XY mode. How do I save the full trace?
When saving a screenshot, sometimes only a portion of the XY trace will show:You can get the full waveform by turning on persistence in the Display menu:  
FAQ ID63676 Faq
I want to trigger on the primary frequency (perhaps 60 Hz)+ this frequency is modulated with the motor frequency (perhaps 600 Hz) with an amplitude of perhaps a third of the primary frequency's amplitude. The scope will not adequately trigger on the motor current signal.
This signal creates Multiple zero crossings which makes the triggering unstable. Turn down the amplitude of the composite signal (ch1) so that the scope's built in hysteresis will swamp out the motor drive zero crossings. This channel will be used …
FAQ ID58436 Faq
What are the differences between the two frequency measurements that the TPS2000 Series makes?
Automatic Frequency Measurement Method used to make measurement: Reciprocal of the Period measurement. Made over the first complete cycle in the record. Period measured from the first mid-ref crossing to the third mid-ref crossing Accuracy (typical …
FAQ ID58636 Faq
I plan to measure Motor Drive signals with a TPS2024. Cat II & Cat III confuse me. What exactly is this?
CAT ratings are industry-standard category safety ratings, Test instruments are rated on their ability to withstand a voltage spike which are applied through a specified level of resistance. The installation categories are: CAT III Distribution …
FAQ ID57411 Faq
I am using the TPS2024 with the current probe A622. The scope is measuring the charging current of a capacitor+ the reading of the RMS and Frequency is not shown and all that is displaying are question marks. What is the set up so the scope can make these measurements?
The best solution is to use the TPS2PWR1 Power Measurement Application software module. Using the Power Application module we find the Cycle RMS value, 383 mV, and Frequency is 60.02 Hz If you do not have the Power Application module a work …
FAQ ID58346 Faq
디지털 스토리지 오실로스코프
TPS2000B 시리즈는 오실로스코프의 여러 고유한 기능과 익숙하고 사용하기 편한 컨트롤 및 메뉴를 제공합니다. 2채널 또는 4채널 버전으로 IsolatedChannel™ 기술이 적용된 TPS2000B 시리즈는 접지에서 측정을 분리할 수 있을 뿐 아니라 채널 간의 완벽한 분리도 가능하므로 회로 손상의 우려가 적습니다. 배터리가 기본적으로 제공되므로 현장 업무용으로 적합합니다. 전력 전자 장비를 측정할 경우 옵션으로 제공되는 소프트웨어를 사용하면 …

참고자료 번호: 3MK-17750-14
Datasheet
FIRMWARE UPDATE FOR TPS2000 and TPS2000B models
This firmware v11.09 is compatible with all TPS2000 and some TPS2000B models. See release notes for detailed Serial Number information on which TPS2000B models are supported by this firmware. All other TPS2000B models either contain the latest …

부품 번호: 066139100
펌웨어
모든 현상을 포착하십시오
Tektronix DRT(디지털 실시간) 샘플링 기술엔지니어나 기술자는 신호 세부사항을 정확하게 캡처하고 있다는 확인과 믿음이 필요합니다.오실로스코프의 샘플 속도가 빠르지 않을 경우 일시적 신호 세부사항이 손실되어 오류가 발생합니다.디지털 실시간 오실로스코프는 실시간으로 신호를 받고 단일 획득 주기에서 파형을 정확히 재구성하는 데 필요한 신호 샘플을 충분히 캡처합니다.

참고자료 번호: 3GK-17741-0
애플리케이션 노트 Marketing Document
New Approach to Quick, Accurate, Affordable Floating Measurements
Engineers and technicians often need to make “floating” measurements where neither point of the measurement is at ground(earth) potential. This measurement is often referred to as a differential measurement. “Signal common” may be elevated tohundreds …

참고자료 번호: 3MW-17773-1
애플리케이션 노트 Marketing Document
XYZs of Oscilloscopes Primer
After reading this primer, you will be able to:Describe how oscilloscopes workDescribe the differences between analog, digital storage, digital phosphor, and digital sampling oscilloscopesDescribe electrical waveform typesUnderstand basic …

참고자료 번호: 03Z-8605-7
입문서 Marketing Document
오실로스코프 입문서
본 입문서는 60페이지 분량으로 오실로스코프의 기본 사항과 조작을 이해하는 데 적합합니다. 신호 무결성의 중요성, 오실로스코프의 작동 원리, 파형 측정 결과를 해석하는 방법과 같은 기초적인 개념에 대해 설명되어 있습니다.

참고자료 번호: 03K-8605-5
입문서 Marketing Document
장비 최대한활용하기
텍트로닉스 오실로스코프 소프트웨어,프로브 및 악세사리를 사용하면 오실로스코프를 특정 애플리케이션 요구사항 및 환경에 맞출 수 있습니다.

참고자료 번호: 60W_14232_10
제품 선택 가이드 Marketing Document
TPS2000B 시리즈 사용 설명서
디지털 스토리지 오실로스코프

이 TPS2000B 시리즈 사용 설명서에는 오실로스코프의 작동 방식이 설명되어 있고 설치 절차가 포함되어 있습니다. 또한 기능 및 애플리케이션에 대한 정보도 제공됩니다.


부품 번호: 077138801
주 사용자 Manual
TPS2000B 시리즈 사용 설명서
디지털 스토리지 오실로스코프

이 TPS2000B 시리즈 사용 설명서에는 오실로스코프의 작동 방식이 설명되어 있고 설치 절차가 포함되어 있습니다. 또한 기능 및 애플리케이션에 대한 정보도 제공됩니다.


부품 번호: 077138800
주 사용자 Manual
TPS2000B Series
Digital Storage Oscilloscope User Manual

This manual contains operating information for the TPS2000B Series Digital Storage Oscilloscopes.
부품 번호: 071273301
주 사용자 Manual
TBS1000, TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope Declassification and Security Instructions Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the TBS1000, TDS1000B, TDS2000B, TDS1000C-EDU, TDS2000C, and TPS2000B Series Digital Storage Oscilloscopes
부품 번호: 077077100
기밀 해제 Manual
TBS1000, TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TPS2000/TPS2000B Series
Digital Oscilloscope Programmer Manual

This document describes commands that can be used to remotely control the product.
부품 번호: 077044402
프로그래머 Manual
TPS2000B Series
Digital Storage Oscilloscopes Service Manual

This service manual provides information to verify performance of, calibrate, troubleshoot, disassemble, and replace parts on the TDS2000C Series Digital Storage Oscilloscopes.
부품 번호: 077044701
서비스 Manual
TPS2000B 시리즈 사용 설명서
디지털 스토리지 오실로스코프 User Manual

이 TPS2000B 시리즈 사용 설명서에는 오실로스코프의 작동 방식이 설명되어 있고 설치 절차가 포함되어 있습니다. 또한 기능 및 애플리케이션에 대한 정보도 제공됩니다.
부품 번호: 071274200
주 사용자 Manual
TPS2000/B BNC
Replacement Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
부품 번호: 071289500
현장 설치 지침 Manual
TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TPS2000/TPS2000B Series
Digital Oscilloscope Programmer Manual

This document describes commands that can be used to remotely control the product.
부품 번호: 077044401
프로그래머 Manual
TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope Declassification and Security Instructions Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the TDS1000B, TDS2000B, TDS1000C-EDU, TDS2000C, and TPS2000B Series Digital Storage Oscilloscopes
부품 번호: 077044500
기밀 해제 Manual
TPS2000B Series
Digital Storage Oscilloscopes Service Manual

This service manual provides information to verify performance of, calibrate, troubleshoot, disassemble, and replace parts on the TDS2000C Series Digital Storage Oscilloscopes.
부품 번호: 077044700
서비스 Manual
TPS2000 시리즈 사용자 설명서
디지털 스토리지 오실로스코프 User Manual

이 TPS2000 시리즈 사용 설명서에는 오실로스코프의 작동 방식이 설명되어 있고 설치 절차가 포함되어 있습니다. 또한 특성, 기능 및 애플리케이션에 대한 정보도 제공됩니다.
부품 번호: 071145003
사용자 Manual
050-3642-00 and Above Instructions
Backlight Inverter Board Replacement Kit for TPS2000 Series Oscilloscopes Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
부품 번호: 075093400
현장 설치 지침 Manual
TDS200, TDS1000/TDS2000, TDS1000B/TDS2000B, and TPS2000 Programmer
Digital Storage Oscilloscopes

This document describes commands that can be used to remotely control the product.
부품 번호: 071107504
프로그래머 Manual
Memory Erasure and Memory Parts List Instructions
TDS200, TDS1000/2000 & TPS2000 Series Digital Storage Oscilloscopes Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
부품 번호: 071185700
기밀 해제 Manual
TPS2000 Series Important Information
TPS2000 Series Important Information Other

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
부품 번호: 071170202
사용자 Manual
TPS2000 BNC Instructions
Replacement Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
부품 번호: 063382900
현장 설치 지침 Manual
TPS2000 Series Read This First
Oscilloscope User Manual Changes Read This First

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
부품 번호: 063378900
사용자 Manual
P2220 Probe Safety Warning Sheet
1X/10X MHz Passive Probe Other

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
부품 번호: 063380400
사용자 Manual
TPS2000B Series
Oscilloscope Safety and Compliance

This manual contains compliance and safety information for the TPS2000B Series Digital Storage Oscilloscopes.


부품 번호: 071354302
사용자 Manual
Read This First
TPS2000B Series Oscilloscopes available documentation and applications

This document lists the available documentation and applications for the TPS2000B Series Digital Storage Oscilloscopes.


부품 번호: 061442600
사용자 Manual
TPS2000B Series
Digital Storage Oscilloscopes

This service manual provides information to verify performance of, calibrate, troubleshoot, disassemble, and replace parts on the TPS2000B Series Digital Storage Oscilloscopes.


부품 번호: 077044702
서비스 Manual
TPS2000B Series
Oscilloscope Safety and Compliance

This manual contains compliance and safety information for the TPS2000B Series Digital Storage Oscilloscopes.


부품 번호: 071354300
사용자 Manual
TBS1000, TBS1000B/TBS1000B-EDU, TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope Declassification and Security Instructions Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the TBS1000, TDS1000B, TDS2000B, TDS1000C-EDU, TDS2000C, and TPS2000B Series Digital Storage Oscilloscopes
부품 번호: 077077102
기밀 해제 Manual
TBS1000B, TBS1000, TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TDS2024C, TPS2000/TPS2000B Series
Digital Oscilloscope Programmer Manual

This document describes commands that can be used to remotely control the product.
부품 번호: 077044403
프로그래머 Manual
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

부품 번호: 066093812
드라이버
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

부품 번호: 066093811
드라이버
Tektronix Openchoice Desktop Application TDSPCS1 - v2.6
The Tektronix OpenChoice Desktop free application lets you capture oscilloscope screen images, waveform data, and settings from a Microsoft Windows computer. After installing the software, refer to the section “Connecting to a PC” in your …

부품 번호: 066093914
유틸리티
Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC …

부품 번호: 066133202
유틸리티
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

부품 번호: 066093809
드라이버
LabVIEW SignalExpress Step for TDS1000B, B-SC, C, C-EDU, TDS2000B, C
This Step provides the capability to connect, control and log data from the TDS1000B, B-SC, C and C-EDU; TDS2000B and C; and TPS2000B series instruments from the Signal Express Environment.

부품 번호: 066130301
애플리케이션
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …

참고자료 번호: 46W-31080-7
선택 가이드 Marketing Document
Fundamentals of Floating Measurements and Isolated Input Oscilloscopes
This guide will provide you with a fundamental glossary of power measurement terms, explain the different options available for making floating measurements, and highlight the advantages and trade-offs of each option.

참고자료 번호: 3AW-19134-2
애플리케이션 노트 Marketing Document
I need a printer which will work with the TPS2000 series. Which one should I purchase?
An alternate method to using a printer with a Centronics port is purchase a printer which can read a compact flash card. Then you can save your pictures to TPS2000 compact flash card then print them direct from the printer, no cable required. The …
FAQ ID57401 Faq
What is the charging time for the TPS2000 series batteries?
Batteries can be charged either in the instrument or in the optional TPSCHG external charger. In the external charger, a battery will charge in 3 hours. When AC power is supplied to the TPS2000, a battery will charge in about 4.5 hours if the …
FAQ ID58736 Faq
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
FAQ ID64791 Faq
Is the Windows 7 driver for the RS232 to USB cable adapter (p/n:174-5813-00) available?
The driver for the adapter 174-5813-00 for Windows 7 support is available from its chip vendor at here. 
FAQ ID64476 Faq
On the TPS2000+ when do I use the multipurpose knob and when do I press the bezel buttons to change settings?
You use the multipurpose knob when the indicator light associated with the knob is lit (e.g., cursor position in the cursor menu). If the light is not lit, select on or off operations by pressing the bezel button (e.g., measurement type in the …
FAQ ID58556 Faq
Can Tektronix Digital Storage Oscilloscopes export XY Display mode waveform data in a single file?
Tektronix Digital Storage Oscilloscopes XY Display mode waveform data is displayed by taking the voltage amplitude portion of the real-time YT voltage vs. time waveforms simultaneously acquired on channel 1 and channel 2 (or channel 3 an 4 on some …
FAQ ID59141 Faq
Does turning off the TPS2000 front-panel backlights make the batteries last longer?
Yes, but only about 10 minutes longer.
FAQ ID58216 Faq
How do I upgrade the TPS2000 series oscilloscope firmware?
UPGRADE PROCEDURE You will need a CompactFlash reader and a CompactFlash card connected to your computer. Download this version of firmware to your PC by pressing the "Download" button on the Firmware Update for the TPS2000 Series page and following …
FAQ ID57346 Faq
Why does OpenChoice Desktop "Get Screen" operation time-out and display "Data transfer ended unexpectedly", when “Select Instrument”, “Get Data”, “Get & Send Settings” operations are successful?
When connecting to a TPS2000/B, TDS1000, TDS2000, or TDS3000/B series scopes with a Centronics parallel printer port using direct RS232, or RS232 to USB adapter, you must set the scope’s Printer Port to “RS232” (TDS1000/2000, TPS2000/B; Utility …
FAQ ID64806 Faq
My TPS2024 with the Power Application module installed the Harmonics selection does not properly measure the harmonics on my waveform.
The following shows an example of a waveform with harmonics. If the secondary frequency is not an exact multiple of the fundamental the scope may display mixed results. The recommendation is to change the Setup selection in the Harmonics menu from …
FAQ ID58541 Faq
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
FAQ ID60306 Faq
I have a previous version of Open Choice Desktop software loaded on my PC. Do I need a new version to work with the TPS2000?
You can upgrade the software by using the version supplied with the TPS2000 oscilloscope.You can also download an upgraded version of the Open Choice Desktop from the Tektronix Web site. (This contains two distinct pieces of software: TekVISA and …
FAQ ID58366 Faq
Does the TPS2000 Series use an industry-standard battery (available locally)?
No. To ensure proper instrument performance, you should purchase the batteries only from Tektronix.
FAQ ID58211 Faq
Are the TPS2000 oscilloscope BNC inputs (and external trigger) isolated from the I/O ports on the back of the instrument?
Yes. For example, you can use OpenChoice® PC connectivity software with the TPS2000 series while making floating measurements (within the specified instrument and probe limits), and the optional WaveStar software can be used for fully programmable …
FAQ ID58046 Faq
What is the difference between digital real-time (DRT) sampling technology used in the TPS2000 Series and equivalent time sampling (ET) technology used by other manufacturers in the market?
Sample rate determines the highest frequency that can be captured in a single shot. For linear interpolation, the rule of thumb is that the sample rate must be 10 times higher than the highest frequency to be captured for a waveform to be reproduced …
FAQ ID58751 Faq
Are Tektronix current probes compatible with the TPS2000 series oscilloscopes?
Yes, here is the list for the recommended current probes. A621 5 - 50 kHz AC current probe, 2000A A622 DC - 100kHz AC/DC current probe, 100A P6021 120Hz - 60 MHz AC current probe, 15A P6022 935 Hz - 120MHz AC current probe, 6A TCP202 (requires 1103 …
FAQ ID58041 Faq
Is the isolation maintained when using the AC Adapter?
Yes. Full isolation is maintained.
FAQ ID58501 Faq
I have never used an isolated channel oscilloscope+ what advantage can I expect to gain from it?
The TPS2000 Series 4 IsolatedChannel™ input architecture provides true and complete channel-to-channel isolation for both the positive input and the negative reference leads, including the external trigger input. Refer to the IsolatedChannel …
FAQ ID58386 Faq
How do I turn the TPS2000 front-panel backlight on or off?
Press the Utility menu button and then the Options bezel button. The top bezel button toggles the backlight on and off.
FAQ ID58296 Faq
When the TPS2000 series scope is plugged into an AC power source+ there is no indication that the unit is running on AC power. Is this also true when the unit is running on its battery?
When the unit is plugged into AC power, there is no indicator light. However, there is an indicator light on the unit when the battery is being charged in the instrument (i.e., the instrument is connected to AC power and the battery[ies] is [are] not …
FAQ ID58946 Faq
Do I have to put the battery in slot 1 if I'm using only one battery?
No, the two slots are identical.
FAQ ID58146 Faq
On my TPS2000 series oscilloscope the BNCs are damaged or worn out.  Can I replace them myself?
Yes, you can replace them.  Order a BNC replacment kit Tektronix part number 050374800 for a TPS2000B series or order 050359800 if it is a TPS2000 non-B series.  The kits includes instructions for replacement. You can also view the video below which …
FAQ ID64861 Faq
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
FAQ ID474266 Faq
What are the TDS2000B TV-sync triggering selections and which Standards are supported? Are these features optional or are they provided with the instrument?
The TDS2000B TV sync selections are Line Number, Odd field, Even field, All Fields and All Lines. The supported Standards are NTSC and PAL/SECAM. There is no TV trigger option available and no additional cost for these features. The TV trigger …
FAQ ID64041 Faq
Is there a special operating mode that enables me to get 8 hours of battery operation in the TPS2000 Series?
No, there is no low-power setting as on some products because TPS2000 monitors the remaining battery life. With two fully charged batteries, the product can operate for up to 8 hours even with the front panel backlights operating. In addition, the …
FAQ ID58511 Faq
How high can I float the TPS2000 series oscilloscopes?
The input to the scope can accept up to 600 VRMS CAT II or 300 VRMS CAT III BNC shell to earth ground, 1200 VRMS CAT II between any two channel commons with each of the channel commons not being more than +/- 600 VRMS from earth ground. The P2220 …
FAQ ID58321 Faq
Do you offer a RS232 to a USB cable adapter?
Yes.  This can be ordered as part number 174-5813-00.
FAQ ID64446 Faq
How do I declassify or sanitize my instrument?
Declassification and Security documents for many Tektronix products are located in the Download, Manuals and Documentation on Tek.com.  /node/7106.  Enter your instrument model number and select Download Type as "Manuals".  At the results screen, on …
FAQ ID55686 Faq
In reference to the TPS2000 + what do you mean by "hot-swappable" batteries?
While the product is running on one battery, you can install another fully charged battery without having to turn off the oscilloscope or interrupt normal operation. (The oscilloscope drains only one battery at a time and the lowest-capacity battery …
FAQ ID58451 Faq
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …
FAQ ID63266 Faq
Does the P2220 probe replace the P2200 probe?
Yes. The P2220 probe is compatible with TDS1000 and TDS2000 Series as well as the TPS2000 Series. The P2200 probe and other standard single-ended passive probes cannot be used with the TPS2000 Series because safe operation of the TPS2000 Series …
FAQ ID58196 Faq
How do I know how much battery charge is left in the TPS2000 batteries?
There is a Battery Status menu found under the Utility menu System status. Notes indicate whether battery 1 and battery 2 are installed and the time remaining on each battery.
FAQ ID58281 Faq
The TPS2000 series scope is powered by rechargeable batteries+ is a battery charger included with the scope?
The batteries are charged by the scope internally when it is connected to the AC outlet. There is an external charger available but it is not included with the scope. The part number is TPSCHG, ( External battery charger for TPS2000 Series …
FAQ ID58581 Faq
Why does Math work differently between my older TDS200 or TDS1000/2000 series oscilloscope+ and my newer TDS1000B/2000B series oscilloscope?
The way to calculate math was different in the older TDS200 and TDS1000/2000 series oscilloscopes then most other oscilloscopes, including the new TDS1000B/2000B series.The older instruments used a method that could be called Display Math. In Display …
FAQ ID64386 Faq
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
FAQ ID64561 Faq
Do you offer a RS232 to a USB cable adapter?
Yes.  This can be ordered as part number 174-5813-00.
FAQ ID59281 Faq
My TPS2000 scope was running FV:V10.14 and I updated to FV:V10.20. I notice the cooling fan is running much faster now. Is this situation correct?
Yes, the fan has 3 speeds: fast, slow, and off. With the new firmware there were changes made to the fan algorithm. Also when the instrument is powered up the fan start up is at high speed. Speed changes can be adjusted once a minute. The scope …
FAQ ID57566 Faq
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689 …
FAQ ID64571 Faq
Can the trigger signal frequency readout provide frequency measurements greater than the rated bandwidth of the oscilloscope?
Yes; however, this depends on the available signal strength.
FAQ ID58131 Faq
I have a TDS3034B with the battery and charger. Can I use this battery and charger with the TPS2000 scopes?
No, the batteries and charger for the TDS3000 and TDS3000B series will not work with the TPS2000 series. The TPS2000 series batteries and the charger are unique and are designed specifically for this series.
FAQ ID58371 Faq
Can I download waveform data and screenshots to my computer by using HyperTerminal?
Yes you can. Use the first procedure to get waveform data, and the second to get a screenshot. For both Waveform data and screenshots, setup Hyperterm for communication. If you want to see the characters you type in the window (recommended), then you …
FAQ ID58076 Faq
Can I look at and measure an instantaneous power waveform?
With the TPS2000's math multiply function, you can easily multiply a voltage and current waveform to obtain an instantaneous power waveform. You can independently scale this math waveform for optimized viewing. In addition, you can make power …
FAQ ID58081 Faq
On the TPS2000+ where is the trigger point when the pulse width trigger is used and a specified amount of time is selected?
Equal: Oscilloscope triggers when trailing edge of the pulse crosses the trigger level. Not equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues …
FAQ ID58561 Faq
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
FAQ ID63686 Faq
What operating system does the TDS1000B+ TDS2000B+ TPS2000+ MSO/DPO2000+ TDS3000C+ MSO/DPO3000 and MSO/DPO4000 use? And are they susceptible to viruses?
The above oscilloscopes use closed embedded real-time operating systems and do not have the capability to create, modify, run or save programs that are on a USB device or LAN .  Therefore, they are not susceptible to virus attacks and cannot spread …
FAQ ID56996 Faq
Can I convert my wfm files to an open format+ such as a CSV (comma separated values) file?
You can use one of the following three WFM to ASCII converters. Converter for TDSxxx - works with files created by TDSx00 series (for example, TDS500 series) Converter for TDS5xxx,TDS6xxx, TDS7xxx, DPO7xxx,DPO70xxx, DSA70xxx Converter for the …
FAQ ID56386 Faq
Can I operate the TPS2000 series oscilloscope on AC power without a battery installed?
Yes. The AC adapter supplies 15V DC to power the instruments so that no battery is required.
FAQ ID58091 Faq
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
FAQ ID64251 Faq
I can not get a screenshot of the full trace in XY mode. How do I save the full trace?
When saving a screenshot, sometimes only a portion of the XY trace will show:You can get the full waveform by turning on persistence in the Display menu:  
FAQ ID63676 Faq
I want to trigger on the primary frequency (perhaps 60 Hz)+ this frequency is modulated with the motor frequency (perhaps 600 Hz) with an amplitude of perhaps a third of the primary frequency's amplitude. The scope will not adequately trigger on the motor current signal.
This signal creates Multiple zero crossings which makes the triggering unstable. Turn down the amplitude of the composite signal (ch1) so that the scope's built in hysteresis will swamp out the motor drive zero crossings. This channel will be used …
FAQ ID58436 Faq
What are the differences between the two frequency measurements that the TPS2000 Series makes?
Automatic Frequency Measurement Method used to make measurement: Reciprocal of the Period measurement. Made over the first complete cycle in the record. Period measured from the first mid-ref crossing to the third mid-ref crossing Accuracy (typical …
FAQ ID58636 Faq
I plan to measure Motor Drive signals with a TPS2024. Cat II & Cat III confuse me. What exactly is this?
CAT ratings are industry-standard category safety ratings, Test instruments are rated on their ability to withstand a voltage spike which are applied through a specified level of resistance. The installation categories are: CAT III Distribution …
FAQ ID57411 Faq
I am using the TPS2024 with the current probe A622. The scope is measuring the charging current of a capacitor+ the reading of the RMS and Frequency is not shown and all that is displaying are question marks. What is the set up so the scope can make these measurements?
The best solution is to use the TPS2PWR1 Power Measurement Application software module. Using the Power Application module we find the Cycle RMS value, 383 mV, and Frequency is 60.02 Hz If you do not have the Power Application module a work …
FAQ ID58346 Faq
디지털 스토리지 오실로스코프
TPS2000B 시리즈는 오실로스코프의 여러 고유한 기능과 익숙하고 사용하기 편한 컨트롤 및 메뉴를 제공합니다. 2채널 또는 4채널 버전으로 IsolatedChannel™ 기술이 적용된 TPS2000B 시리즈는 접지에서 측정을 분리할 수 있을 뿐 아니라 채널 간의 완벽한 분리도 가능하므로 회로 손상의 우려가 적습니다. 배터리가 기본적으로 제공되므로 현장 업무용으로 적합합니다. 전력 전자 장비를 측정할 경우 옵션으로 제공되는 소프트웨어를 사용하면 …

참고자료 번호: 3MK-17750-14
Datasheet
FIRMWARE UPDATE FOR TPS2000 and TPS2000B models
This firmware v11.09 is compatible with all TPS2000 and some TPS2000B models. See release notes for detailed Serial Number information on which TPS2000B models are supported by this firmware. All other TPS2000B models either contain the latest …

부품 번호: 066139100
펌웨어
모든 현상을 포착하십시오
Tektronix DRT(디지털 실시간) 샘플링 기술엔지니어나 기술자는 신호 세부사항을 정확하게 캡처하고 있다는 확인과 믿음이 필요합니다.오실로스코프의 샘플 속도가 빠르지 않을 경우 일시적 신호 세부사항이 손실되어 오류가 발생합니다.디지털 실시간 오실로스코프는 실시간으로 신호를 받고 단일 획득 주기에서 파형을 정확히 재구성하는 데 필요한 신호 샘플을 충분히 캡처합니다.

참고자료 번호: 3GK-17741-0
애플리케이션 노트 Marketing Document
New Approach to Quick, Accurate, Affordable Floating Measurements
Engineers and technicians often need to make “floating” measurements where neither point of the measurement is at ground(earth) potential. This measurement is often referred to as a differential measurement. “Signal common” may be elevated tohundreds …

참고자료 번호: 3MW-17773-1
애플리케이션 노트 Marketing Document
XYZs of Oscilloscopes Primer
After reading this primer, you will be able to:Describe how oscilloscopes workDescribe the differences between analog, digital storage, digital phosphor, and digital sampling oscilloscopesDescribe electrical waveform typesUnderstand basic …

참고자료 번호: 03Z-8605-7
입문서 Marketing Document
오실로스코프 입문서
본 입문서는 60페이지 분량으로 오실로스코프의 기본 사항과 조작을 이해하는 데 적합합니다. 신호 무결성의 중요성, 오실로스코프의 작동 원리, 파형 측정 결과를 해석하는 방법과 같은 기초적인 개념에 대해 설명되어 있습니다.

참고자료 번호: 03K-8605-5
입문서 Marketing Document
장비 최대한활용하기
텍트로닉스 오실로스코프 소프트웨어,프로브 및 악세사리를 사용하면 오실로스코프를 특정 애플리케이션 요구사항 및 환경에 맞출 수 있습니다.

참고자료 번호: 60W_14232_10
제품 선택 가이드 Marketing Document
TPS2000B 시리즈 사용 설명서
디지털 스토리지 오실로스코프

이 TPS2000B 시리즈 사용 설명서에는 오실로스코프의 작동 방식이 설명되어 있고 설치 절차가 포함되어 있습니다. 또한 기능 및 애플리케이션에 대한 정보도 제공됩니다.


부품 번호: 077138801
주 사용자 Manual
TPS2000B 시리즈 사용 설명서
디지털 스토리지 오실로스코프

이 TPS2000B 시리즈 사용 설명서에는 오실로스코프의 작동 방식이 설명되어 있고 설치 절차가 포함되어 있습니다. 또한 기능 및 애플리케이션에 대한 정보도 제공됩니다.


부품 번호: 077138800
주 사용자 Manual
TPS2000B Series
Digital Storage Oscilloscope User Manual

This manual contains operating information for the TPS2000B Series Digital Storage Oscilloscopes.
부품 번호: 071273301
주 사용자 Manual
TBS1000, TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope Declassification and Security Instructions Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the TBS1000, TDS1000B, TDS2000B, TDS1000C-EDU, TDS2000C, and TPS2000B Series Digital Storage Oscilloscopes
부품 번호: 077077100
기밀 해제 Manual
TBS1000, TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TPS2000/TPS2000B Series
Digital Oscilloscope Programmer Manual

This document describes commands that can be used to remotely control the product.
부품 번호: 077044402
프로그래머 Manual
TPS2000B Series
Digital Storage Oscilloscopes Service Manual

This service manual provides information to verify performance of, calibrate, troubleshoot, disassemble, and replace parts on the TDS2000C Series Digital Storage Oscilloscopes.
부품 번호: 077044701
서비스 Manual
TPS2000B 시리즈 사용 설명서
디지털 스토리지 오실로스코프 User Manual

이 TPS2000B 시리즈 사용 설명서에는 오실로스코프의 작동 방식이 설명되어 있고 설치 절차가 포함되어 있습니다. 또한 기능 및 애플리케이션에 대한 정보도 제공됩니다.
부품 번호: 071274200
주 사용자 Manual
TPS2000/B BNC
Replacement Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
부품 번호: 071289500
현장 설치 지침 Manual
TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TPS2000/TPS2000B Series
Digital Oscilloscope Programmer Manual

This document describes commands that can be used to remotely control the product.
부품 번호: 077044401
프로그래머 Manual
TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope Declassification and Security Instructions Instructions

This document helps customers with data security concerns to sanitize or remove memory devices from the TDS1000B, TDS2000B, TDS1000C-EDU, TDS2000C, and TPS2000B Series Digital Storage Oscilloscopes
부품 번호: 077044500
기밀 해제 Manual
TPS2000B Series
Digital Storage Oscilloscopes Service Manual

This service manual provides information to verify performance of, calibrate, troubleshoot, disassemble, and replace parts on the TDS2000C Series Digital Storage Oscilloscopes.
부품 번호: 077044700
서비스 Manual
TPS2000 시리즈 사용자 설명서
디지털 스토리지 오실로스코프 User Manual

이 TPS2000 시리즈 사용 설명서에는 오실로스코프의 작동 방식이 설명되어 있고 설치 절차가 포함되어 있습니다. 또한 특성, 기능 및 애플리케이션에 대한 정보도 제공됩니다.
부품 번호: 071145003
사용자 Manual
050-3642-00 and Above Instructions
Backlight Inverter Board Replacement Kit for TPS2000 Series Oscilloscopes Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
부품 번호: 075093400
현장 설치 지침 Manual
TDS200, TDS1000/TDS2000, TDS1000B/TDS2000B, and TPS2000 Programmer
Digital Storage Oscilloscopes

This document describes commands that can be used to remotely control the product.
부품 번호: 071107504
프로그래머 Manual
Memory Erasure and Memory Parts List Instructions
TDS200, TDS1000/2000 & TPS2000 Series Digital Storage Oscilloscopes Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
부품 번호: 071185700
기밀 해제 Manual
TPS2000 Series Important Information
TPS2000 Series Important Information Other

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
부품 번호: 071170202
사용자 Manual
TPS2000 BNC Instructions
Replacement Kit Instructions

This document contains information that is necessary to install a product software and/or hardware kit. The instructions may include configuration, adjustment, functional check, and operating instructions related to the kit installation.
부품 번호: 063382900
현장 설치 지침 Manual
TPS2000 Series Read This First
Oscilloscope User Manual Changes Read This First

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
부품 번호: 063378900
사용자 Manual
P2220 Probe Safety Warning Sheet
1X/10X MHz Passive Probe Other

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
부품 번호: 063380400
사용자 Manual