다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

6 시리즈 MSO

1GHz부터 8GHz까지 업그레이드 가능한 대역폭으로 현재는 물론 미래에 발생 가능한 고속 디자인 문제를 해결하고 검증할 수 있습니다. 낮은 노이즈와 채널당 25GS/s의 샘플링 속도로 정확한 측정 결과를 얻을 수 있습니다. 또한 채널을 켤 때 샘플링 속도가 감소되지 않습니다.  

Bandwidth

최대 8GHz

샘플링 속도

채널당 25GS/s

레코드 길이

최대 250M 포인트

수직 해상도

12비트

고감도에서 최저 노이즈 제공

1mV/div에서 기존 오실로스코프의 75% 이상 노이즈 감소

이전에는 볼 수 없었던 신호를 볼 수 있습니다.

  • 새로운 TEK061 프런트엔드 ASIC를 통해 입력 노이즈가 최소화됩니다.
  • 4GHz에서 12비트 해상도, 200MHz에서 최대 16비트 해상도
축소판 노이즈 감소의 배경이 되는 기술 확인

Advanced measurements and analysis made easy

6 시리즈 - 지터 분석 구성
6 시리즈 - 전력 품질
6 시리즈 - 고속 시리얼
6 시리즈 - 4채널

GHz 클럭 및 직렬 버스에서 간편하게 지터 특징을 지정할 수 있습니다. 고급 측정 기능이 통합되어 통계 정보를 일상 작업의 도구 키트로 편리하게 사용할 수 있습니다. 예를 들어, 지터 또는 고급 파워 분석에도 일상적인 상승 시간 및 rms 측정과 같이 Drag & Drop을 사용할 수 있습니다.

  • 고급 지터 분석
  • Advanced Power Analysis
  • 파워 레일 측정
  • Memory Analysis and Debug
  • High-speed Serial Compliance
  • Automated Measurements and Trend Analysis
  • 스펙트럼 뷰 주파수 도메인 디스플레이

Signal fidelity starts with probes

6-signal-fidelity-rev1.png

4개의 FlexChannel® 입력 채널로 다양한 기능을 활용할 수 있습니다. 10배 속도의 1GHz 프로브를 제공하며, 장비와 함께 회로를 살펴보십시오. 고성능 싱글 엔드 액티브 프로브, 디퍼런셜 프로브 또는 새로운 TriMode 프로브로 한 번에 두 작업을 모두 실행할 수 있습니다. TLP058 프로브를 입력에 연결하여 손쉽게 8개의 로직 분석 채널을 활용할 수 있습니다. 최대 32개의 디지털 채널이 사용 가능합니다.

  • 1 MΩ and 50 Ω input terminations
  • Four 1 GHz low-loading passive probes, included
  • New TDP7700 Series 4, 6 and 8 GHz Trimode probes
  • New TAP4000 & TDP4000 4 GHz single-ended & differential probes

FlexChannel 입력

고해상도 아날로그 입력 1개

채널당 디지털 로직 입력 8개

Touchscreen that works

  • 반응성이 매우 뛰어난 15.6인치 터치스크린
  • 핀치/줌/스와이프(Pinch/zoom/swipe)
  • 버튼 및 마우스로도 작동 용이

Confidence in numbers

Input Channels
4 FlexChannel inputs.
Each FlexChannel provides 1 analog signal input or 8 digital logic inputs with TLP058 probe

대역폭 1
1, 2.5, 4, 6, 8GHz

Sample Rate
25 GS/s on all analog/digital channels

레코드 길이 1
모든 아날로그/디지털 채널에서 최대 250M 포인트

신호 발생기 1
임의, 사인파, 사각파, 펄스, 램프, 삼각파, DC 레벨, 가우시안, 로렌츠, 지수 상승/감쇠, Sin(x)/x, 랜덤 노이즈, 하버사인(Haversine), 카디악

디지털 전압계 2
4자리

트리거 주파수 카운터 2
8자리

Display
15.6-inch (385 mm)
TFT color HD (1920 x 1080) resolution Capacitive (multi-touch) touchscreen

1 - 옵션이며 업그레이드 가능
2 - 제품 등록 시 무료

Add functionality or performance as your needs change

  • 최대 8GHz 대역폭 추가 가능
  • 각 채널에서 250Mpoints 레코드 길이 증가 가능
  • 최대 32개 디지털 채널을 제공하는 로직 프로브 추가 가능
  • Windows 10 운영 체제 추가 가능
  • 임의/함수 발생기 추가 가능
  • 고급 분석 추가: 시리얼 디코드/트리거, 파워, 지터,
    메모리 분석 및 디버그, 자동화된 컴플라이언스 테스트

New features and options make the best scopes better

새로운 옵션

Free upgrades on instruments with advanced analysis options

  • 마스크 테스트 옵션이 장착된 장비는 한계 테스트 기능을 제공합니다

Free upgrade on all instruments

  • 콜아웃/북마크를 사용해 파형의 특정 위치 또는 디스플레이의 모든 위치에 주석을 달 수 있습니다
  • 스펙트럼 뷰의 주파수 축은 이제 로그일 수 있습니다
  • 이제 위상 노이즈 측정을 통해 위상 노이즈 플롯을 사용할 수 있습니다

Already have a 6 Series? Get your update.

새로운 펌웨어 다운로드

제품 구성 (What's in the box?)

  • 4 TPP1000 1 GHz, low-C passive probes
  • 1-year warranty on the included probes
  • 3-year warranty on the instrument
  • Mouse, power cord and front cover with attached accessory pouch
  • Printed Installation Manual covers safety and basic operation
  • Comprehensive Integrated Online Help
  • Certificate of traceability
구성 및 견적
모델 아날로그 대역폭 샘플링 속도 레코드 길이 아날로그 채널 디지털 채널 함수 발생기 출력 정가
MSO64

1GHz ~ 8GHz

25GS/s

62.5 ~ 250M 포인트

4

최대 32(옵션)

1 (optional)

US $26,500
구성 및 견적
모델 아날로그 대역폭 샘플링 속도 레코드 길이 아날로그 채널 디지털 채널 함수 발생기 출력 정가
MSO64

1GHz ~ 8GHz

25GS/s

62.5 ~ 250M 포인트

4

최대 32(옵션)

1 (optional)

US $26,500
구성 및 견적
  텍트로닉스
6 시리즈 MSO
텍트로닉스
5 시리즈 MSO
Keysight
S-시리즈
Rohde & Schwarz
RTP 시리즈
Rohde & Schwarz
RTO 시리즈
LeCroy
WavePro HD
자세한 사양 비교 -- -- Fact Sheet Fact Sheet Fact Sheet Fact Sheet
대역폭 범위 1GHz ~ 8GHz 350MHz ~ 2GHz 500MHz ~ 8GHz 4GHz ~ 8GHz 600MHz ~ 6GHz 2.5GHz ~ 8GHz
대역폭(4개 채널) 8GHz 2GHz 4GHz 8GHz 4GHz 4GHz
Upgradeable Bandwidth 아니요
아날로그 채널 수 4 4, 6 또는 8 4 4 2 또는 4 4
채널 입력 임피던스 50Ω, 1MΩ 50Ω, 1MΩ 50Ω, 1MΩ 50Ω 50Ω, 1MΩ 50Ω, 1MΩ
아날로그 샘플링 속도(4개 채널) 최대 25GS/s 최대 6.25GS/s 최대 10GS/s 최대 20GS/s 최대 20GS/s 최대 10GS/s
표준 레코드 길이(4개 채널) 62.5Mpts 62.5Mpts 100Mpts 50Mpts 50Mpts 50Mpts
통합 임의/함수 발생기 50MHz(옵션) 50MHz(옵션) 없음 없음 100MHz(옵션) 없음
디지털/로직 분석 채널(MSO) 최대 32(옵션) 최대 64(옵션) 16(옵션) 16(옵션) 16(옵션) 16개(옵션)
파형 캡처 속도(wfms/s) >500,000 >500,000 >1,100 950,000 >1,000,000 사용할 수 없음
RMS 노이즈, 1mV/div, 1GHz, 4GHz, 8GHz 60µV, 97µV, 169µV 254µV, NA, NA 90µV, 153µV, 260µV NA, 270µV, 430µV 100µV, 240µV, NA NA, 228µV, 315µV
ADC 해상도 12비트 12비트 10비트 8비트 8비트 12비트
Operating System 임베디드 OS
Windows 10(옵션)
임베디드 OS
Windows 10(옵션)
Windows 10 Windows 10 windows 7 Windows 10
표준 프로브 1GHz 패시브
3.9pF 부하
최대 1GHz 패시브
3.9pF 부하
500MHz 패시브
9.5pF 부하
없음 500MHz 패시브
10pF 부하
500MHz 패시브
10pF 부하
기본 보증 3년 3년 1년 3년 3년 3년

전원 공급기 분석

MSO64 전면 애플리케이션

자동화된 파워 측정 및 분석을 사용하여 안정적이고 반복 가능한 파워 품질, 고조파, 스위칭 손실, 안전 동작 영역 측정 등을 수행할 수 있습니다. SPMI 디코딩 및 트리거링으로 시간을 절약할 수 있습니다. 또한 6 시리즈 MSO의 낮은 노이즈 성능을 활용하여 전원 공급기 노이즈를 정확히 평가할 수 있습니다.

주요 특징

  • 전력 품질 및 고조파
  • 스위칭 손실 및 안전 동작 영역
  • 회로 내 인덕터 및 변압기 분석
  • SPMI 전원 관리 버스 디코딩 및 트리거링

지터 분석

6 시리즈 - 지터 분석 구성

모든 임베디드 시스템 및 디지털 통신 링크의 핵심에는 클럭이 있습니다. 지터 및 기타 클럭 왜곡은 시스템 작동에 영향을 줄 수 있으며 적절한 분석 도구가 없으면 근본 원인을 알아내기 어려울 수 있습니다.

주요 특징

  • 표준 위상 노이즈, TIE 및 주파수 도표 및 히스토그램
  • 지터 분해 및 클럭 복구 기능을 포함하는 고급 분석 옵션

시리얼 표준 컴플라이언스 테스트

MSO64(모니터 포함)

시스템에는 빠르고 안정적인 데이터 전송이 요구됩니다. 또한 고속 디지털 표준은 이러한 안정성을 보장하기 위해 엄격한 테스트 절차에 의존합니다. 자동 컴플라이언스 테스트 소프트웨어는 6 시리즈 MSO를 사용하여 설정, 측정, 표준 한도 기준 검사 및 철저한 보고서 생성에 이르는 전체 테스트 프로세스를 관리합니다.

주요 특징

  • 이더넷 10/100/1000BASE-T
  • Ethernet XGBT Compliance
  • Ethernet NBASE-T Compliance
  • USB 2.0
  • MIPI D-PHY 1.2
  • 자동차 이더넷 100/1000BASE-T1

전원 무결성

6 시리즈 - 전원 무결성

오늘날의 보드에는 20개 이상의 파워 레일이 있을 수 있습니다. 이들 중 대부분은 몇 볼트 미만이며 엄격한 잡음 제한이 있습니다. 정확한 측정에는 특별한 주의가 필요합니다.

주요 특징

  • 디지털 전원 관리 옵션 리플 및 켜기/끄기 측정을 자동화
  • 낮은 노이즈 TPR 시리즈 파워 레일 프로브와 호환
  • 낮은 측정 시스템 노이즈
데이터 시트 소프트웨어 패키지/소프트웨어 옵션 설명 구성 및 견적 요청

디지털 채널 액세스

업그레이드 설명 구매 세부 사항
TLP058 로직 프로브 각 프로브가 FlexChannel 입력 장치의 8개 디지털 채널에 액세스 프로브 견적 요청

장비 기능 추가

업그레이드 설명 구매 세부 사항
SUP6-AFG 임의 함수 발생기(AFG) 추가 평가판 라이선스 요청

견적 요청
SUP6-DVM 디지털 전압계/트리거 주파수 카운터 추가 등록 시 소프트웨어 업그레이드 라이선스 파일이 제공됩니다.
지금 등록하십시오.
SUP6-RL-1 레코드 길이를 125Mpts/채널로 확장 평가판 라이선스 요청

견적 요청
SUP6-RL-1T2 채널당 125Mpts에서 250Mpts로 레코드 길이 연장 평가판 라이선스 요청

견적 요청
SUP6-RL-2 레코드 길이를 250Mpts/채널로 확장 평가판 라이선스 요청

견적 요청
SUP6-WIN Windows 10 라이선스가 설치된 SSD 추가 평가판 사용 불가

견적 요청

프로토콜 분석 추가

업그레이드 설명 구매 세부 사항
SUP6-SR8B10B 8b10b 프로토콜 디코더 및 검색 평가판 라이선스 요청

견적 요청
SUP6-SRAERO 항공우주산업 시리얼 트리거링 및 분석(MIL-STD-1553, ARINC429) 평가판 라이선스 요청

견적 요청
SUP6-SRAUDIO Audio serial triggering and analysis (I 2S, LJ, RJ, TDM) 평가판 라이선스 요청

견적 요청
SUP6-SRAUTO 오토모티브 시리얼 트리거링 및 분석(CAN, CAN FD, LIN, FlexRay) 평가판 라이선스 요청

견적 요청
SUP6-SRAUTOEN1 100BASE-T1 자동차 이더넷 프로토콜 디코드 소프트웨어 평가판 라이선스 요청

견적 요청
SUP6-SRAUTOSEN 자동차 센서 시리얼 트리거링 및 분석(SENT) 평가판 라이선스 요청

견적 요청
SUP6-SRCOMP 컴퓨터 시리얼 트리거링 및 분석(RS-232/422/485/UART) 평가판 라이선스 요청

견적 요청
SUP6-SREMBD Embedded serial triggering and analysis (I 2C, SPI) 평가판 라이선스 요청

견적 요청
SUP6-SRENET 이더넷 시리얼 트리거링 및 분석(10Base-T, 100Base-TX) 평가판 라이선스 요청

견적 요청
SUP6-SRI3C MIPI I3C 디코딩 및 분석 평가판 라이선스 요청

견적 요청
SUP6-SRNRZ NRZ 프로토콜 디코더 및 검색 평가판 라이선스 요청

견적 요청
SUP6-SRPM Power Management serial triggering and analysis (SPMI) 평가판 라이선스 요청

견적 요청
SUP6-SRPSI5 PSI5 시리얼 디코드 및 분석 평가판 라이선스 요청

견적 요청
SUP6-SRSPACEWIRE SpaceWire 프로토콜 디코딩 및 분석 평가판 라이선스 요청

견적 요청
SUP6-SRUSB2 USB 2.0 시리얼 버스 트리거링 및 분석(LS, FS, HS)(HS는 ≥1GHz 모델 권장) 평가판 라이선스 요청

견적 요청

시리얼 컴플라이언스 테스트 추가

업그레이드 설명 구매 세부 사항
SUP6-AUTOEN-BND 자동차 이더넷 컴플라이언스, 신호 분리, PAM3 분석, 100BASE-T1 디코딩 소프트웨어 평가판 라이선스 요청

견적 요청
SUP6-AUTOEN-SS TekExpress 자동화 플랫폼을 사용하는 신호 분리 솔루션(최소 BW 1GHz) 평가판 라이선스 요청

견적 요청
SUP6-CMINDUEN10 산업용 이더넷(10Base-T1L 장거리) 자동 컴플라이언스 테스트 솔루션 평가판 라이선스 요청

견적 요청
SUP6-PAM3 TekExpress 자동화 플랫폼을 사용하는 PAM3 자동 컴플라이언스 솔루션(최소 BW 1GHz) 평가판 라이선스 요청

견적 요청
SUP6-CMAUTOEN 자동차 이더넷(100Base-T1 및 1000BASE-T1) 자동화 컴플라이언스 테스트 솔루션 평가판 라이선스 요청

견적 요청
SUP6-CMUSB2 USB 2.0 자동화 사전 컴플라이언스 테스트 솔루션 평가판 라이선스 요청

견적 요청
SUP6-CMENET 이더넷(10/100/1000BASE-T) 컴플라이언스 테스트 솔루션 평가판 라이선스 요청

견적 요청
SUP6-CMDPHY MIPI D-PHY 1.2 컴플라인스 테스트 솔루션 평가판 라이선스 요청

견적 요청
SUP6-CMNBASET 이더넷(2.5/5GBASE-T) 컴플라이언스 테스트 솔루션 평가판 라이선스 요청

견적 요청
SUP6-CMXGBT 이더넷(10GBASE-T) 컴플라이언스 테스트 솔루션 평가판 라이선스 요청

견적 요청
SUP6-DBLVDS 6 시리즈 MSO 오실로스코프를 위한 자동 LVDS 테스트 솔루션 평가판 라이선스 요청

견적 요청

고급 분석 추가

업그레이드 설명 구매 세부 사항
SUP6-DPM 완벽한 디지털 전력 관리 분석 및 디버그 솔루션(DPMBAS에서의 모든 정확한 측정 + 지터 분석 및 아이 다이어그램 분석 포함) 평가판 라이선스 요청

견적 요청
SUP6-DJA 고급 지터 및 아이 분석 평가판 라이선스 요청

견적 요청
SUP6-MTM 마스크 및 한계 테스트 평가판 라이선스 요청

견적 요청
SUP6-PWR 전력 분석 평가판 라이선스 요청

견적 요청
SUP6-SV-BW-1 스펙트럼 뷰 캡처 대역폭을 2GHz까지 높여줍니다 평가판 라이선스 요청

견적 요청
SUP6-SV-RFVT 스펙트럼 뷰 RF와 시간 비교 분석 평가판 라이선스 요청

견적 요청
SUP6-VID 아날로그 비디오 트리거(NTSC, PAL, SECAM) 평가판 라이선스 요청

견적 요청

대역폭 업그레이드

업그레이드 설명 구매 세부 사항
SUP6-BWxTy4 x에서 y로의 MSO64 대역폭 업그레이드(여기서 x 및 y는 백 단위 MHz임)  

메모리 디버그 및 컴플라이언스 추가

업그레이드 설명 구매 세부 사항
SUP6-DBDDR3 DDR3 메모리 디버그 솔루션 평가판 라이선스 요청

견적 요청
SUP6-CMDDR3 DDR3 / LPDDR3 컴플라이언스 테스트 평가판 라이선스 요청

견적 요청
액세서리 HC5
데이터 시트 설명
보기 데이터 시트 5 시리즈 MSO 운송용 하드 케이스
액세서리 RM5
데이터 시트 설명
보기 데이터 시트 5 시리즈 MSO용 랙 마운트 키트
액세서리 SUP6-WIN
데이터 시트 설명
보기 데이터 시트 Removable SSD with Windows license on 6 Series oscilloscopes
데이터 시트 액세서리 설명
HC5 5 시리즈 MSO 운송용 하드 케이스
RM5 5 시리즈 MSO용 랙 마운트 키트
SUP6-WIN Removable SSD with Windows license on 6 Series oscilloscopes
How independent time and frequency controls beat traditional FFTs.
0h 6m 19s
Make extremely accurate power rail measurements using two Tektronix power rail probes, a Keithley DMM6500 touchscreen Digital Multimeter, and ultra-low-noise 6 Series mixed signal oscilloscope …
0h 1m 46s
What's the big deal with low noise? We talked to our engineers about how they achieved ground-breaking noise performance in the 6 Series Mixed Signal Oscilloscope.
0h 6m 58s
If you're doing mixed frequency/time domain work, Spectrum View makes it easy. Learn how to set up 5 and 6 Series MSOs to display synchronized time and frequency domain views on multiple channels …
0h 6m 0s
Learn how to get optimal results from your power supply design by checking the power supply rejection ratio. This video covers how DC-DC  converters or low voltage drop-out regulators (LDOs) …
0h 8m 55s
Test automation may be used to check automotive Ethernet transmitters for compliance with the BroadR-Reach, 100BASE-T1 (P802.3bw), and 1000BASE-T1 (802.3bp) standards. This demonstration shows the …
0h 4m 52s
Learn how to use the eScope function to remotely control a Tektronix oscilloscope over a network without any special software. This video shows how to find the IP address of the scope and use a …
2:14
Learn how to quickly capture bursts just by drawing a couple of boxes, and how to apply logic and add more shapes to capture increasingly complex waveforms. See how visual triggers work on the 5 …
4m 5s
Learn how 5 and 6 Series MSO Mixed-Signal Oscilloscopes and the optional embedded serial bus analysis software provide unparalleled system visibility by decoding MIL-STD 1553 messages, triggering …
0h 3m 14s
An AWG70002B was used to create a pair of 20us wide RF pulse trains at 3.85GHz. One pulse train has a constant/unchanging phase – this is our reference and is applied to Ch1. The other pulse …
3m 29s
See the ultra-low noise performance of the TPR4000 Power Rail Probe, and how it can be used for measuring DC power rail noise in microvolts, especially when paired with the 6 Series MSO …
0h 6m 15s
Watch how easy it can be to setup and analyze waveform behavior using the highly intuitive touch interface. Setting up your measurement and debugging your system has never been easier with the …
1:51
See how Spectrum View provides ease-of-use and the ability to achieve optimal views in both RF and Time domains simultaneously when analyzing the turn on behavior of a spread spectrum clock.  This …
2:32
Learn how to annotate test results and methods with “Callouts” for easily documenting important information when sharing data across a team, recreating a measurement at a later date, or delivering …
1:42
Automotive Ethernet with PAM3 introduces new test challenges. Tektronix' new, innovative, non-intrusive Signal Separation simplifies Automotive Ethernet testing and set-up, providing advanced …
0h 8m 3s
Are you seeing ALL the noise from your power rails? Lee Morgan, Technical Marketing Manager in EMEA, demos one of our power integrity setups with a 6 Series MSO, our new Power Rail Probes, and an …
0h 1m 27s
Automated Compliance Testing of MIPI D-PHY Physical Layer
The MIPI Alliance has defined tests to ensure that MIPI D-PHY transmitter designs conform to MIPI standards.  D-PHY compliance testing is usually performed using an oscilloscope and may be automated to speed up testing, reduce errors and simplify …

참고자료 번호: 48W-61638-0
애플리케이션 노트
Solutions for Aerospace and Defense
Integrated Tektronix measurement tools for signal capture, characterization, simulation and analysis help you deliver on your promises. Learn more about our military/government solutions.

참고자료 번호: 46A-61169-2
브로슈어
Measuring Digital Clock Stability and Jitter with an Oscilloscope
This application note explains how to use oscilloscope measurements to quantify the performance of any digital clock, including processor clocks and communications clocks. It briefly covers amplitude measurements and focuses on clock frequency …

참고자료 번호: 48W-61379-1
애플리케이션 노트
Is e*scope supported on the 5 or 6 series MSO with Windows 10 installed?
Yes.  With firmware v1.8 or above, using the web browser access to the Windows 10 version is supported along with TightVNC.  TightVNC must be installed on both the remote PC and the scope.  For the detailed setup instructions, please see the 5/6 …
FAQ ID474031
My Tektronix oscilloscope uses the Linux operating system.  Where do I get a copy of the linux open source code as stated in the GNU Lesser General Public License notice?
For our Linux based instruments or programs licensed under the “GNU General Public License (GPL) or Lesser GNU General Public License (LGPL)” the complete corresponding sources are available. You can order a complete machine-readable copy of the …
FAQ ID64866
How do I remotely control my 5 or 6 Series MSO from my computer, easily and without any programming?
For the standard instrument (without the Windows 10 option installed), you can simply connect your computer to the instrument through Ethernet and control the oscilloscope with your favorite browser. Find the instrument’s IP address by selecting …
FAQ ID474201
I recently registered our Tektronix oscilloscope, updated the firmware and am currently trying to activate the free DVM & Frequency Counter.  I don’t see any software downloads for activating the DVM. Am I doing something wrong, or looking in the wrong spot?
After you have registered your oscilloscope on Tek.com, you should have received an email with instructions.  The email is sent to the address you used to login to tek.com.  If you haven't received the email after registration: Check your spam …
FAQ ID468046
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
FAQ ID64251
How can I ungroup the channel badge on the 5/6 Series MSO?
On firmware v1.12 or above, the 5/6 Series MSO added the stacked and overlay mode mix and match feature.  It allows user to group multiple channels for overlay mode for easy comparison. To separate the channels in the group, there are couple options …
FAQ ID773401
How do I set up a network drive on my 5 Series MSO or 6 Series MSO?
Introduction Network drives were introduced in firmware version 1.8.7 for 5 Series, 5 Series Low Profile, and 6 Series MSOs.  This feature allows you to specify a directory on another computer for the scope to use as storage.  To access this storage …
FAQ ID773296
After I place an order for a software-license or an upgrade for my 5 or 6 Series MSO, how do I get and install the software license or the upgrade license?
After you place an order for the software license or an upgrade for your 5 or 6 Series MSO, you will receive an email (at the email address in your MyTek account). It will look about like this, but customized for you: Dear Customer …
FAQ ID235451
Where are the controls for Roll Mode displays in my 5 and 6 Series MSO?
Roll Mode provides an instant display response when the oscilloscope is operating at very slow sweep speeds. Without it, the acquisition must complete before the display will update. With Horizontal Scale factors as slow as 1000 s/div, that can be a …
FAQ ID235436
What are some of the advantages of the 5 and 6 Series MSO digital trigger?
Since its invention by Tektronix in the 1940s, the oscilloscope’s trigger system has been a key component of the products, providing a stable display of repetitive signals and the capture of specific events in a signal. At the circuit level, the …
FAQ ID467411
Where do I start learning about oscilloscopes and Tektronix offerings?
This document covers the basics of oscilloscopes including history and general operation, in this training presentation developed by a Tektronix Applications Engineer. Learn the XYZ's of Oscilloscopes »    
FAQ ID778971
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker …
FAQ ID247211
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
FAQ ID474266
My scope has Windows 10 version 1607, but more recent versions have been released by Microsoft.  Can my scope be updated?
No, but there is no need to.  The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (Windows 10 Enterprise LTSC). Unlike normal releases of version 1607, this release still receives security updates and support from Microsoft …
FAQ ID780986
I saw a warning message when recalling an instrument setup on my 5 or 6 Series MSO. What caused it?
The 5 and 6 Series MSO will display a pop-up warning message when it is not completely successful recalling the saved state of the instrument with a setup or session file. The following message will appear on the display: WARNING The oscilloscope …
FAQ ID235416
How can I invert the channel on the 5 or 6 series MSO?
With firmware v1.16, the invert function is available in the channel menu.  If the unit has the older firmware v1.14 or below, the invert channel feature on the 5 or 6 series MSO is supported via the math channel instead. Here is the setup …
FAQ ID723956
Does Tektronix have a 12-bit oscilloscope?
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications. Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such …
FAQ ID69266
What is the range of the logic threshold supported on the 5 and 6 Series MSO?
The logic threshold can be set between +/-40V with the TLP058 logic probe. Each individual digital channel can be set for its own threshold level.
FAQ ID468126
Is it possible to establish a peer to peer ethernet connection on the 5/6 Series MSO?
Yes. To setup a peer to peer connection, you must manually configure the IP and subnet mask address on both the scope and your computer. You can then use an ethernet cable connected directly between the scope and computer.  This will work on the …
FAQ ID474351
How do I keep Windows 10 up to date on my scope?
Updating Windows 10 Using Windows Update By default, Windows 10 will attempt to automatically keep itself up to date with the latest critical security patches, but it will not install optional updates.  To ensure Windows 10 receives all available …
FAQ ID782296
Does my 5 or 6 Series MSO support multiple displays?
Yes, the 5 and 6 Series MSO hardware supports a total of three displays, including the instrument’s internal display. The instrument provides DVI-D, Display Port, and VGA connectors on the rear panel. The standard instrument (running the Linux …
FAQ ID250721
What does “Probe Dynamic Range” mean and how does the 5 and 6 Series MSO indicate it?
Oscilloscope probes which contain active circuitry, especially with amplifiers in the signal path, have a limited dynamic range over which the probe behaves linearly. When input signals exceed this range, the signal may be distorted. (Such probes …
FAQ ID474196
What user interface differences should I expect to see between a standard 5 or 6 Series MSO and one equipped with the optional Windows 10 operating system?
When you purchase a 5 Series MSO with the 5-WIN option or a 6 Series MSO with the 6-WIN option installed, or upgrade your 5 Series MSO with the SUP5-WIN upgrade, or upgrade your 6 Series MSO with the SUP6-WIN upgrade, you will see very few …
FAQ ID235441
What is the difference between Windows 10 on my scope and standard Windows 10?
The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC), specifically Windows 10 Enterprise 2016 LTSB (Long-Term Service Branch 1607).  You can read more about the LTSC here: https://docs.microsoft.com/en-us/windows/whats …
FAQ ID782291
I received the following message about my floating license:  (This is a courtesy note to remind you that the checkout of 1 floating license(s) will soon expire.) Why am I receiving this message when I own the license?
The Floating Licenses are good forever; however, the checkout of the Floating License is good for for any duration from 4 hours up to 4 years, selectable at the time of check out.  After it reaches selected duration, it will automatically check …
FAQ ID467516
Where can I locate the visual trigger setup on the 5 or 6 series MSO?
The visual trigger option is not listed in the trigger type selection initially.  To setup the visual trigger, simply click on the "DRAW A BOX" icon (located in the lower right corner of the display) to draw the areas for the visual trigger.  After …
FAQ ID723951
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 and 6 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from …
FAQ ID471231
Can I mount a network drive on my standard (non-Windows) 5 or 6 Series MSO? How could I use this capability?
The oscilloscope has a built-in m.2 drive, labeled C:. This drive can be used to store waveforms, setups, and measurement results. However, this drive is not easily accessible to your computer. The oscilloscope also has several USB ports to support …
FAQ ID474191
I get an error message “CvP Tester Didn’t Run” on my 5 Series MSO.
Instruments that have both a Linux drive and a Windows drive should have the same firmware revision on both drives. When only one drive has the latest firmware installed, the instrument user may find that firmware is not updated on the Linux drive …
FAQ ID771991
Where can I find the positive/negative pulse count auto measurement on the 5/6 Series MSO?
Currently, there is no auto measurement for the positive or negative pulse count on the 5/6 Series MSO. The workaround would be using the “Search” feature to search for the pulse width. First, set up for the positive pulse width auto …
FAQ ID773396
What is the deskew range and resolution between channels for the 5 or 6 series MSO?
Both 5 and 6 series MSO support a deskew range of -125ns to +125ns. The 6 series MSO can be adjusted in 1ps resolution for all acquisition modes except Peak Detect and Envelope (40ps resolution). The 5 series MSO can be adjusted in 40ps resolution …
FAQ ID723961
How many digital channels are supported on the 5 and 6 Series MSO?
Each analog channel on the 5 and 6 Series MSO can be converted into 8 digital channels with the logic probe TLP058.  For a 4-channel model (MSO54, MSO64), it is up to 32 digital channels. For a 6-channel model (MSO56), it is up to 48 digital channels …
FAQ ID468121
How are 5 and 6 Series MSO setup files and session files different? How should I use them?
The 5 and 6 Series MSO setup files contain all instrument settings, user-configured analysis, and reference waveforms, so they provide an easy way to return the oscilloscope to a known state. For example, if you want to build a library of …
FAQ ID235446
How do I save and transfer a screenshot from the 4, 5 or 6 Series MSO oscilloscope to my PC via the remote command interface?
Screenshots (also known as hard copies) can be transferred from the Series 4, 5 and 6 MSO oscilloscopes via the remote programming interface using just a few simple commands.  For information on how to send commands to the instrument via the remote …
FAQ ID245436
Decoding and Searching MIPI I3C Bus Activity with an Oscilloscope
The MIPI I3C standard defines a two-wire interface with a bidirectional data bus for connecting sensors to an application processor. This application note gives a brief orientation on the physical layer and packet structures of the I3C protocol. It …

참고자료 번호: 48W-61676-0
애플리케이션 노트
EMI Troubleshooting with the Latest-Generation Oscilloscopes
This application note describes techniques using an oscilloscope that can help you determine the source of unwanted radiated emissions (EMI), especially after an out-of-limits condition has been identified through formal testing or pre-compliance …

참고자료 번호: 48W-61644-0
애플리케이션 노트
How to Troubleshoot System Problems Using an Oscilloscope with I2C and SPI Decoding
Learn about the physical layers of the most common interchip buses - I2C and SPI - to enable you to troubleshoot bus problems or system issues.  Learn how to set up and interpret the results when you use automated decoding, triggering, and search on …

참고자료 번호: 55W-61091-1
애플리케이션 노트
5/6 Series MSO with Option 5-SEC or 6-SEC Enhanced Security
Instrument Declassification and Security Instructions

This document describes how to clear or sanitize 5 Series and 6 Series MSO instruments that have option 5-SEC or 6-SEC installed, to allow removal from a secured area, or returning the instrument for repair.
부품 번호: 077140802
기밀 해제
TekExpress Automotive Ethernet (10Base-T1S) Compliance Analysis Solution
TekExpress Automotive Ethernet (10Base-T1S) Compliance Analysis Solution for 5/6 Series Mixed Signal Oscilloscope (MSO)

This document contains operation information for the TekExpress Automotive Ethernet (10Base-T1S) Compliance Analysis Solution. It is a PDF version of the help system accessible in the TekExpress software.
부품 번호: 077167900
주 사용자
4/5/6 Series MSO
MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64 Printable Application Help

This is a printable version of the 4/5/6 Series MSO (MSO44. MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64) on-instrument help system. Supports firmware version 1.22.x.
부품 번호: 077130310
주 사용자
6 Series MSO
Specifications and Performance Verification

Revision B. For firmware version 1.0 and above. This document contains the specifications and performance verification procedures for the 6 Series MSO instruments.
부품 번호: 077146103
성능 확인
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64)
Programmer Manual

This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, and LPD64 instruments. Supports firmware version 1.22.x.


부품 번호: 077130509
프로그래머
TekExpress Ethernet Compliance Solution for DPO5000/7000/70000 oscilloscopes
TekExpress Ethernet Compliance Solution for DPO5000/7000/70000 oscilloscopes

The application provides more visibility into your Ethernet designs with 1000BASE-T/100BASE-TX/10BASE-T PHY measurements as outlined in IEEE 802.3 Section 40, ANSI X3.263, and IEEE 802.3 Section 14 specific measurements for different Ethernet standards to the already existing rich tool set of generic jitter, timing, and signal quality measurements in Tektronix Oscilloscope.


부품 번호: 077163501
사용자
TekExpress Ethernet Compliance Solution
TekExpress Ethernet Compliance Solution

This document contains operation information for the TekExpress Ethernet Tx Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software.


부품 번호: 077150403
주 사용자
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64)
Programmer Manual

This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, and LPD64 instruments. Supports firmware version 1.20.x.


부품 번호: 077130508
프로그래머
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64)
Programmer Manual

Revision A: This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP and MSO64 instruments. Supports firmware version 1.16.x.


부품 번호: 077130507
프로그래머
TekExpress Industrial Ethernet Compliance Solution
TekExpress Industrial Ethernet Compliance Solution

This document contains operation information for the TekExpress Industrial Ethernet Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software.


부품 번호: 077162400
주 사용자
4/5/6 Series MSO
MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64 Printable Application Help

This is a printable version of the 4/5/6 Series MSO (MSO44. MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64) on-instrument help system. Supports firmware version 1.20.x.


부품 번호: 077130308
주 사용자
TekExpress Automotive PAM3 Analysis Application
TekExpress Automotive PAM3 Analysis Application

Automotive Ethernet operates as a full-duplexcommunication link over a twisted-pair cable. The Full-Duplex communication, along with PAM3 signaling, adds complexity invalidating the Electronic Control Units (ECU) in real-world conditions. The TekExpress Automotive PAM3 Analysis applicationincludes unique Signal Separation capability and Electrical analysis.


부품 번호: 077160600
사용자
TekExpress D-PHY Automated Solution for MSO6 oscilloscopes
TekExpress D-PHY Automated Solution for MSO6 oscilloscope Printable Online Help

TekExpress is the Tektronix Test Automation Framework, developed to support your current and future test automation needs. TekExpress uses a highly modular architecture that lets you deploy automated test solutions for various standards in a relativelyshort time.


부품 번호: 077151501
사용자
6 Series MSO
Revision B: Specifications and Performance Verification

Revision A: For firmware version 1.0 and above. This document contains the specifications and performance verification procedures for the 6 Series MSO instruments.


부품 번호: 077146102
성능 확인
4/5/6 Series MSO Option License
Install Instructions

This document describes how to install optional upgrade licenses to add new functions or features to 4/5/6 Series MSO instruments (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64).


부품 번호: 071351902
현장 설치 지침
5/6 Series MSO (MSO54, MSO56, MSO58, MSO58LP, MSO64)
Programmer Manual

This document describes the remote access programming commands for the MSO54, MSO56, MSO58, MSO58LP and MSO64 instruments. Supports firmware version 1.14.


부품 번호: 077130506
프로그래머
TekExpress Ethernet NBASE-T Compliance Solution
TekExpress Ethernet NBASE-T Compliance Solution

This document contains operation information for the TekExpress Ethernet NBASE-T Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software.


부품 번호: 077152000
주 사용자
TekExpress D-PHY Automated Solution for MSO6 oscilloscopes
TekExpress D-PHY Automated Solution for MSO6 oscilloscope Printable Online Help

TekExpress is the Tektronix Test Automation Framework, developed to support your current and future test automation needs. TekExpress uses a highly modular architecture that lets you deploy automated test solutions for various standards in a relatively
short time.


부품 번호: 077151500
사용자
5/6 Series MSO (MSO54, MSO56, MSO58, MSO58LP, MSO64)
Programmer Manual

This document describes the remote access programming commands for the MSO54, MSO56, MSO58, MSO58LP and MSO64 instruments. Supports firmware version 1.12.


부품 번호: 077130505
프로그래머
Reference Waveform File Format
DPO70000SX, TDS5000, TDS6000/B, TDS7000/B, CSA7000/B, DPO7000/C, DPO70000/B/C/D/DX, DSA70000/B/C/D, MSO70000/C/DX, MSO5000/B, DPO5000/B Series, 5 Series MSO, and 6 Series MSO

This document specifies the reference waveform file format for the instrument.


부품 번호: 077022011
프로그래머
6 Series MSO
MSO64

This manual provides theory of operation, service instructions, and a list of replaceable parts for the 6 Series MSO instruments.


부품 번호: 077146200
서비스
6 Series Mixed Signal Oscilloscope
MSO64 Installation and Safety

This manual describes installing and setting up the 6 Series oscilloscope, and introduces the User Interface and basic oscilloscope operations.

Learn the XYZ's of Oscilloscopes »


부품 번호: 071357900
사용자
RM5
Rackmount Kit for 5/6 Series MSO

This document supports installing Tektronix 5/6 Series instruments in a rackmount kit to fit in a standard 19-inch equipment rack.


부품 번호: 071352302
현장 설치 지침
5/6 Series MSO With Option 5-SEC Enhanced Security
Instrument Declassification and Security Instructions

This document describes how to clear or sanitize 5 Series MSO instruments (MSO54, MSO56, MSO58) that have option 5-SEC installed, to allow removal from a secured area, or returning the instrument for repair.


부품 번호: 077140801
기밀 해제
5/6 Series MSO MSO5, MSO56, MSO58, MSO58LP, MSO64
Install Upgrade Options

This document describes how to install optional upgrade licenses to add new functions or features to 5/6 Series MSO instruments (MSO54, MSO56, MSO58, MSO58LP, MSO64).


부품 번호: 071351901
현장 설치 지침
5/6 Series MSO Option SUP5-WIN, SUP6-WIN
SSD with Microsoft Windows 10 Upgrade Kit

This document describes how to install the Microsoft Windows 10 environment SSD option on the 5/6 Series MSO instruments (MSO54, MSO56, MSO58, MSO64), and how to activate Windows after installation.


부품 번호: 071352401
현장 설치 지침
Read This First
Update your 5/6 Series MSO with the latest firmware

This is a reminder to update your instrument with the latest firmware.


부품 번호: 061442001
현장 설치 지침
TekExpress Automotive Ethernet (10BASE-T1S/100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.3.0
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 10BASE-T1S (IEEE Std 802.3cg) standard, 100BASE-T1 (IEEE Std.802.3bw) and 1000BASE-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical test …

부품 번호: 066208900
애플리케이션
6 Series MSO (Windows OS) Firmware - V1.24.9
Download this firmware to install the latest updates for the 6 Series MSO oscilloscopes. This firmware only applies to oscilloscopes that have option 6-WIN (Windows 10) installed.

부품 번호: 066198606
펌웨어
6 Series MSO (non-Windows) Firmware - V1.24.9
Download this firmware to install the latest updates for 6 Series MSO and 6 Series Low Profile Digitizer. This firmware only applies to instruments that do not have option 6-WIN (Windows 10) installed.

부품 번호: 066198506
펌웨어
6 Series MSO (Windows OS) Firmware - V1.22.5
Download this firmware to install the latest updates for the 6 Series MSO oscilloscopes. This firmware only applies to oscilloscopes that have option 6-WIN (Windows 10) installed.

부품 번호: 066198604
펌웨어
6 Series MSO (non-Windows) Firmware - V1.22.5
Download this firmware to install the latest updates for 6 Series MSO and 6 Series Low Profile Digitizer. This firmware only applies to instruments that do not have option 6-WIN (Windows 10) installed.

부품 번호: 066198504
펌웨어
TekExpress Automotive Ethernet (100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.2.9
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical test specification as per Open Alliance. The …

부품 번호: 066186014
애플리케이션
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - 5 and 6 Series MSO - V1.2.1
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with …

부품 번호: 066196755
애플리케이션
4, 5 and 6 Series MSO, 5 and 6 Series Low Profile Digitizers IVI-COM Driver - V1.6.0
TekSeriesScope IVI-COM Driver for 4, 5 and 6 Series Mixed Signal Oscilloscopes; 5 and 6 Series Low Profile Digitizers IVI Scope class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI …

부품 번호: 066192807
드라이버
Tektronix TekExpress LVDS Automated test solution on the 5/6 Series MSO V1.0.0.
The Tektronix TekExpress LVDS transmitter test application offers a physical layer test solution for transmitter parameter measurements and characterization.

부품 번호: 066170911
애플리케이션
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

부품 번호: 066093812
드라이버
TekExpress Industrial Ethernet (10BASE-T1L) Automated Compliance Solution - MSO5 and MSO6 series - V1.0.0
TekExpress Industrial Ethernet Compliance Solution - MSO 5000 and 6000The TekExpress Industrial Ethernet application (10Base-T1L) is a compliance test solution for performing transmitter electrical specification measurements and MDI return loss …

부품 번호: 066203600
애플리케이션
6 Series MSO (non-Windows) Firmware - V1.20.7
Download this firmware to install the latest updates for the 6 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 6-WIN (Windows 10) installed.

부품 번호: 066198503
펌웨어
6 Series MSO (Windows OS) Firmware - V1.20.7
Download this firmware to install the latest updates for the 6 series MSO oscilloscopes. This firmware only applies to oscilloscopes that have option 6-WIN (Windows 10) installed.

부품 번호: 066198603
펌웨어
TekExpress Automotive PAM3 Analysis Solution - MSO5 and MSO6 series - V1.0.0
The Tektronix TekExpress Automotive PAM3 Analysis is an automated test solution for performing Signal Separation on a Full duplex 100BASE-T1 Automotive Ethernet signals at system level. User can perform measurements like eye height and eye width can …

부품 번호: 066203300
애플리케이션
6-CMDPHY - 6 Series MSO - V1.1.0
TekExpress D-PHY Tx software with Option 6-CMDPHY provides unmatched automation for each test with auto-cursor setting or automatic identification of gating areas. This solution supports the D-PHY base specification v1.2 and the D-PHY conformance …

부품 번호: 066170812
애플리케이션
4, 5 and 6 Series Mixed Signal Oscilloscope IVI-COM Driver - V1.5.0
The TekSeriesScope IVI-COM Driver for 4, 5 and 6 Series Mixed Signal Oscilloscopes is an IVI Scope class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-compliant specific driver …

부품 번호: 066192806
드라이버
6 Series MSO (Windows OS) Firmware - V1.16.6
Download this firmware to install the latest updates for the 6 series MSO oscilloscopes. This firmware only applies to oscilloscopes that have option 6-WIN (Windows 10) installed.

부품 번호: 066198602
펌웨어
6 Series MSO (non-Windows) Firmware - V1.16.6
Download this firmware to install the latest updates for the 6 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 6-WIN (Windows 10) installed.

부품 번호: 066198502
펌웨어
TekExpress DDR (DDR3 and LPDDR3) - v1.0.0
DDR (Dual Data Rate) is a dominant and fast-growing memory technology. It offers high data transfer rates needed for all computing applications, from the consumer products to the most powerful servers. The high speeds of these signals require a high …

부품 번호: 066196770
애플리케이션
TekExpress Automotive Ethernet (100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.2.8
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp?-2016) standard for Transmitter electrical test specification as per Open Alliance. The …

부품 번호: 066186013
애플리케이션
6 Series MSO (Windows OS) Firmware - V1.14.13
Download this firmware to install the latest updates for the 6 series MSO oscilloscopes. This firmware only applies to oscilloscopes that have option 6-WIN (Windows 10) installed.

부품 번호: 066198601
펌웨어
TekExpress Ethernet Nbase-T Automated Compliance Solution - MSO 6 - V1.0.0.70
TekExpress Ethernet NBASE-T Conformance Solution provides turnkey testing & characterization solution for 10GBASE-T measurements as outlined in IEEE 802.3 Section 55, and for 5GBASE-T and 2.5GBASE-T as outlined in IEEE P802.3bz, Section 16; NBASE-T …

부품 번호: 066200100
애플리케이션
TekExpress Automotive Ethernet (100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.2.5
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical test specification as per Open Alliance …

부품 번호: 066186012
애플리케이션
5-CMUSB2, 6-CMUSB2 - 5 Series MSO, 6 Series MSO - V1.2.3
The Tektronix USB2.0 compliance test application (Opt. 5-CMUSB2, Opt. 6-CMUSB2) running on a 5 Series MSO and 6 Series MSO oscilloscope provides a one-button compliance testing for USB2.0 devices, hosts, and hubs. The USB software automates the …

부품 번호: 066166808
애플리케이션
Probing Techniques for Accurate Voltage Measurements on Power Supplies with Oscilloscopes
Making oscilloscope voltage measurements on power supplies is fundamental, but not without challenges. Much is  written on oscilloscopes, but probing techniques are often taken for granted. This application note focuses on probing and …

참고자료 번호: 51W-60161-3
애플리케이션 노트
6 Series MSO Upgrade Guide
Most of the features of the 6 Series MSO are field-upgradable, including bandwidth, record length, arbitrary/function generator, logic channels, and protocol support. This 2-page fact sheet lists all available post-purchase upgrades.

참고자료 번호: 48W-61429-5
팩트 시트
Characterizing and Troubleshooting Jitter with Your Oscilloscope
Gives examples of jitter analysis, from basic analysis using frequency and Time Interval Error (TIE) measurements, to more advanced jitter decomposition techniques to help isolate the sources of jitter.  Shows examples of jitter measurements using …

참고자료 번호: 55Z-61099-1
애플리케이션 노트
In-circuit Measurement of Inductors and Transformers with an Oscilloscope
An oscilloscope can be used to measure the performance of inductors and transformers under operating conditions.  This application note: Provides a quick review of practical inductor and transformer theory, especially related to power supply …

참고자료 번호: 55W-61401-2
애플리케이션 노트
Visual Triggers: Graphical Methods for Capturing Bursts and Other Complex Signals on Oscilloscopes
Visual triggers allow you to build triggers by thinking in terms of wave shapes. This technical brief starts by explaining how to quickly capture bursts of specific length by drawing boxes on an oscilloscope display. It then describes how to apply …

참고자료 번호: 48W-61452-0
기술 요약
Using FastFrame Segmented Memory on the 4/5/6 Series MSO
Communications systems, RADAR, and ultrasonic sensors all rely on signals that transfer information in bursts followed by dead time. Processor interrupt pulses can occur intermittently and infrequently. Conventional signal-shot acquisitions on …

참고자료 번호: 55W-61299-2
기술 요약
Achieve Higher Vertical Resolution for More Precise Measurements
This white paper describes an approach in which new oscilloscope ADC technology, combined with digital signal processing and a low-noise front end; can provide even higher resolution than found in conventional high bit-rate ADC implementations.  
백서
Automotive Ethernet: See the True Signal
As the move toward Automotive Ethernet technology in vehicles accelerates, comprehensive design validation is vital to ensure interoperability and reliable operation across multiple ECUs. This application note provides information on Automotive …

참고자료 번호: 48W-61604-0
애플리케이션 노트
Physical Layer Compliance Testing for 1000BASE-T Ethernet
Ethernet compliance testing requires precise test setups and evaluation against limits dictated by IEEE 802.3 standards.  Automated testing software for oscilloscopes greatly simplifies and speeds testing.  This application note summarizes key tests …

참고자료 번호: 48W-61620-0
애플리케이션 노트
Power Supply Measurement and Analysis with 4/5/6-PWR Application Software
Optimizing and validating a bench power supply design requires a number of important measurements.  These include: Line-side power quality measurements, such as power factor, inrush current, and harmonics Switching device measurements, such as …

참고자료 번호: 55W-61294-3
애플리케이션 노트
Troubleshooting USB 2.0 Problems with Your Oscilloscope
Learn the basics of the USB 2.0 physical layer to help you troubleshoot bus problems or system issues.  Learn how to set up and interpret the results when using automated decoding, triggering, and search on an oscilloscope equipped with USB 2.0 bus …

참고자료 번호: 55W-61092-1
애플리케이션 노트
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Accurately measuring current with oscilloscopes is essential for power supply design and general electronics. Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get …

참고자료 번호: 51W-60171-2
애플리케이션 노트
LeCroy WavePro HD Series vs. 6 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 6 Series MSO Mixed Signal Oscilloscope to those of the LeCroy WavePro HD Series.

참고자료 번호: 48W-61427-0
경쟁사
Making Higher Accuracy Oscilloscope Measurements
12-bit analog-to-digital converters deliver higher resolution on the 4, 5 and 6 Series MSO oscilloscopes Higher resolution oscilloscope measurements are becoming more important given today’s signal levels. Scopes are available with 12-bit analog-to …
기술 요약
Getting Started with Power Rail Measurements Application Note
No matter the industry, power integrity requirements are becoming more and more strict and the number of critical power rails in a single design is only growing. Traditional power integrity applications typically use passive probes with AC coupling …

참고자료 번호: 51W-61562-0
애플리케이션 노트
Ensuring the Performance and Conformance of In-Vehicle Networks for New-Generation Automobiles
Automotive Primer: In-Vehicle Networking This primer provides an overview of the trends, challenges and solutions associated with the expected future evolution of in-vehicle networks, as well as a foundation for testing in-vehicle networks to …

참고자료 번호: 48W-61611-0
입문서
Understanding and Performing USB 2.0 Electrical Testing and Debugging
USB 2.0 is used in a wide range of applications, thanks to its performance, reliability and relatively low cost. Automated USB 2.0 compliance testing may be used to prepare for formal compliance certification, or simply to validate bus performance …

참고자료 번호: 55W-61400-0
애플리케이션 노트
Next-Generation Oscilloscopes Brochure - 3 Series MDO, 4 Series MSO, 5 Series MSO, 6 Series MSO
The 3 Series MDO and 4, 5 and 6 Series MSOs offer the largest displays and the greatest user experience of any oscilloscope.  This brochure gives an overview of the platforms, with the similarities and differences between the four series.

참고자료 번호: 48W-61573-0
브로슈어
Control Loop Analysis Kit for Power Design Stability Measurements
This document describes how the Tektronix Control Loop Analysis Kit provides a simple test setup for validating and debugging feedback loop stability.  This setup also enables engineers to test power supply rejection ratio (PSRR) on the regulator …

참고자료 번호: 55W-61596-0
애플리케이션 개요
Keysight S-Series vs. 6 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 6 Series MSO Mixed Signal Oscilloscope to those of the Keysight S-Series.

참고자료 번호: 48W-61424-2
경쟁사
Debugging CAN, LIN and FlexRay Automotive Buses with an Oscilloscope
Explains the physical layer basics of common automotive buses - CAN, LIN, and FlexRay - to enable you to troubleshoot bus problems or system issues.  Learn how to set up and interpret the results when using automated decoding, triggering, and search …

참고자료 번호: 55W-61098-3
애플리케이션 노트
Debugging SPMI Power Management Buses with an Oscilloscope
Designers of mobile devices and other portable systems rely on the System Power Management Interface (SPMI) protocol to monitor and dynamically control supply voltages based on real-time system demands. Enabling them to achieve lower power usage at …

참고자료 번호: 48W-61436-0
애플리케이션 노트
Debugging SENT Automotive Buses with an Oscilloscope
The SENT bus is used in automotive sensors to transmit high-resolution measurements to electronic control units (ECUs), usually in the powertrain. Decoding the Single Edge Nibble Transmissions (SENT) by looking at the signals can be very difficult …

참고자료 번호: 55W-61326-1
애플리케이션 노트
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences …

참고자료 번호: 46W-31080-7
선택 가이드
Troubleshooting Ethernet Problems with your Oscilloscope
Learn the basics of the 10BASE-T and 100BASE-TX Ethernet physical layers to help you troubleshoot bus problems or related system issues. Learn how to set up and interpret the results when using automated decoding, triggering, and search on an …

참고자료 번호: 55W-61093-1
애플리케이션 노트
Rohde & Schwarz RTP Series vs. 6 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 6 Series MSO Mixed Signal Oscilloscope to those of the Rohde & Schwarz RTP Series.

참고자료 번호: 48W-61426-1
경쟁사
Rohde & Schwarz RTO2000 Series vs. 6 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 6 Series MSO Mixed Signal Oscilloscope to those of the Rohde & Schwarz RTO2000 Series.

참고자료 번호: 48W-61425-0
경쟁사
Serial Support Using Tektronix Oscilloscopes and Optional Software
Tektronix oscilloscopes offer a portfolio of optional analysis capabilities to simplify serial bus debug or compliance verification. This selection matrix shows which serial standards are supported by each of the oscilloscope series.  

참고자료 번호: 55W-29028-13
선택 가이드
Spectrum View: A New Approach to Frequency Domain Analysis on Oscilloscopes
Spectrum View is a new way of performing spectrum analysis on an oscilloscope. This application note shows and explains how Spectrum View operates and how it differs from traditional oscilloscope FFT functions. Any analog signal may be presented as …

참고자료 번호: 48W-61563-1
애플리케이션 노트
How do I upgrade the bandwidth of my 6 Series MSO and what do I get with the upgrade?
Bandwidth upgrades for the 6 Series MSO can be accomplished by ordering an upgrade product and entering a new software license into the instrument. The instrument bandwidth appears in the Help-> About menu near the top of the window, between the …
FAQ ID474151
How can I try out optional features for my 6 Series MSO before I buy them?
Most field upgrades for the optional features for the 6 Series MSO are also available for a one-time, 30-day free trial. These are available simply by requesting a trial software license and installing the node-locked license in the instrument …
FAQ ID474156
What optional features are available as upgrades for my 6 Series MSO and how do I get the upgrade?
Most optional, factory-installed features for the 6 Series MSO are also available as field upgrades, and are installed simply by ordering an upgrade product and entering a new, node-locked software license into the instrument. There are several …
FAQ ID474161
Advanced Radar Analysis: Tools for Measuring Modern Radar Application Note
With today's rapid advances in radar technology, developing and manufacturing highly specialized and innovative electronic products to detect radar signals takes leading-edge technology and tools. Tektronix innovative test equipment reduces …

참고자료 번호: 37W-23378-4
애플리케이션 노트
Measuring Power Supply Switching Loss with an Oscilloscope
Losses due to dissipation in switching devices such as MOSFET's and IGBT's contribute significantly to the overall losses in switch mode power supplies.  This application note explains how to measure switching loss and conduction loss in power supply …

참고자료 번호: 46W-60010-3
애플리케이션 노트