The DPOJET Jitter, Noise and Eye Diagram Analysis Tool is an optional product component that enhances measurement and analysis capabilities of DPO,DSA and MSO Series oscilloscopes. DPOJET operates in either of two tiered modes, selected by option key:- The Essentials tier (DJE) provides basic jitter (TIE) and timing analysis and is only available for DPO7000-C and DPO/MSO5000-B, DPO/DSA/MSO70000C-D-DX-SX series instruments- The Advanced tier (DJA) provides full jitter, timing and eye diagram analysis and operates on DPO7000-C, DPO/MSO5000-B, DPO/DSA/MSO70000C-D-DX-SX series instruments.- The Advanced plus tier (DJAN) provides full jitter, noise, timing and eye diagram analysis and operates on DPO7000-C, DPO/MSO5000-B, DPO/DSA/MSO70000C-D-DX-SX series instruments.- FREE TRIALSFree trials in the form of Floating trial license is supported.Earlier form of Free trials is no longer supported.This release of DPOJET is single installer - Jitter, Noise and Eye Diagram Analysis Tool (V10.0.7).This version of DPOJET is compatible with TekScope v10.8.0 (for SX scopes) and Tekscope v10.8.1 or above (for all other scopes). Please ensure that the compatible version of TekScope is installed in your system.
- Version: V10.0.7
- Software Type: Application
- Prerequisites: Download Pre_req_066164512.txt
- Release Date:
- Part Number: 066164512
- Release Notes: Download DPOJET_Readme_066164512.txt
This software applies to: DPO5034, DPO5054, DPO5104, DPO5204, MSO5034, MSO5054, MSO5104, MSO5204, DPO70404C, DPO7054C, DPO7254C, DPO7354C, DPO72004C, DPO71254C, DPO71604C, DPO70604C, DPO70804C, DSA70404C, DSA70604C, DSA70804C, DSA71254C, DSA71604C, DSA72004C, MSO70404C, MSO70604C, MSO70804C, MSO71254C, MSO71604C, MSO72004C, MSO70404, MSO70604, MSO70804, MSO71254, MSO71604, MSO72004, DPO72504D, DPO73304D, DSA72504D, DSA73304D, DPO72304SX, DPO73304SX, DPS73308SX, DPS75004SX, DPO75002SX, DPO77002SX, DPS77004SX
By downloading, you agree to the terms and conditions of the Software Download Agreement.
For programs licensed under the “GNU General Public License (GPL) or Lesser GNU General Public License (LGPL)” the complete corresponding sources are available. You can order a complete machine-readable copy of the source code from us for a period of three (3) years after download or receipt of the software, by sending a written request to:
Chief Intellectual Property
14150 SW Karl Braun Dr.
Beaverton, OR 97077
This offer is valid to anyone in receipt of this information.
Your request should include: the name of the product, (ii) your (company) name, and (iii) your return mailing and email address (if available).
Please note that we may charge you a fee to cover the cost of performing this distribution.