SPI-4.2/SPI-3 Support Package
이 데이터 시트의 제품은 텍트로닉스에서 더 이상 판매하지 않습니다.
- 대체 제품은 기술 지원 센터에 문의
- 중고 테스트 장비는 Tektronix Encore 확인
- 제품의 지원 및 보증 상태 확인
- 제품의 추가 지원 정보 확인
상세보기:
The support package offers:
- Analysis of SPI-4.2 and SPI-3 internal, high-speed buses
- Full support of SPI-4.2 and SPI-3 rates (up to 350 MHz clock rate and 700 Mb/s data rate for SPI-4.2)
- SPI-4.2 FIFO status decoding with DIP-2 parity check
- DIP-4 parity check
- Trigger on control (SOP, EOP, ABORT) and packet data
- Display packetized SPI frames
- ASCII payload decoding
- Post-processed filtering of data per port
- Real-time filtering of IDLE conditions
- No external processing logic or adapters required
Each support package offers the following support for SPI-4.2 and SPI-3 specifications:
- Channel and group definitions
- Clocking definitions
- SH Analyzer for setup/hold window identification (for SPI-4.2)
- Bus disassembler software
- EasyTrigger™interface offers predefined templates for control and packet data
- PowerTrigger™ interface supports custom trigger definitions for advanced applications
SPI-4.2/SPI-3 TCS101 Support Package
For SPI-4.2 Support:
- Module requirement for transmit or receive interface:
- TLA7Axx logic analyzer modules at 450 MHz - 102 channel and above
- Probe requirement for transmit or receive interface:
- 2 P6880 required for data and
- 1 optional probe for FIFO status capture and decoding - 1ea P6880 (differential probe) for LVDS and either 1ea P6860 or P6880 for LVTTL
- Remarks:
- Double the module and probe requirements for simultaneous transmit and receive interface acquisition
For SPI-3 Support:
- Module requirement for transmit or receive interface:
- TLA6xx logic analyzers at 200 MHz - 68 channel and above
- TLA7xx logic analyzer modules at 200 MHz - 68 channel and above
- TLA7Axx logic analyzer modules at 120 MHz - 68 channel and above
- Probe requirement for transmit or receive interface:
- 2 P6434 or P6880 or use with 68-channel (or above) logic analyzers or modules
- Remarks
- Double the module and probe requirements for simultaneous transmit and receive interface acquisition
- A single 136- channel module cannot be used for transmit and receive simultaneously due to independent clocking in each interface
Package Includes
- Instrument setup software including clocking and channel assignment
- Symbol table of all bus cycle names
- Trigger programs that enable fast trigger setup and custom trigger definition for advanced applications
- Automatic setup/hold analysis application to aid in selection of proper values
- User manual
Ordering Information
- Device description: SPI-4.2 and SPI-3 Bus Support
- Product number: TCS101
Last Modified: