연락처
텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능
전화 문의
9:00am-6:00PM KST에 이용 가능
다운로드
매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.
피드백
피드백이 있으신가요? 귀하의 의견을 알려 주십시오.
귀하의 피드백은 Tek.com 경험을 지속적으로 개선하는 데 도움이 됩니다. 문제가 있는지 아니면 당사에서 잘하고 있는지 알려 주시기 바랍니다.
- Tektronix
- MPC850 Processor Support
MPC850 Processor Support
Support for the Motorola MPC823E, MPC850, MPC823, and MPC801 microprocessors
- Full speed state analysis up to 50 MHz
- Disassembly shows acquired data in the processor's instruction set mnemonics.
- Symbolically identifies all processor bus cycles
- Acquired data can be linked directly to HLL source files for source level debug
- Up to 125 ps timing resolution enables detailed analysis of setup and hold times, edge-to-edge relationships, control timing, etc.
- All data acquired by the logic analyzer is time stamped to enable accurate time correlation of code execution to other system busses or hardware activity.
Probing
Engineers can design a probe interface directly into the system under test. This allows the greatest control of probe loading and provides the most mechanically robust connection. Tektronix recommends designing the P6880 connectorless or P6434 probe connectors into prototype models. Third party breakout boards are also available, providing an alternative probing method.
Minimum System Requirements
- TLA7xx mainframe and one TLA7X3 acquisition module, 102 channels, 100 MHz state, 32K deep (136 channels and up to 64M deep available)
- Or TLA603 instrument, 102 channels, 100 MHz state, 32K deep (136 channels and up to 1M deep available)
- Qty 3: P6860 Connectorless "compression" probes or,
- Qty 3: P6434 high-density mictor probes
- TLA application software version V1.0 or greater
Package Includes
- Instrument setup software including clocking and channel assignments
- Symbol table of all bus cycle names
- Disassembler for MPC850, MPC823 and MPC801 processors
- User manual
Notes and Exceptions
BGA probe adapter for the MPC850 is available from Ironwood Electronics.
Ordering Information
device description product number MPC850/823/801 Support TMS561 probe adapter from Ironwood Electronics LA-BGA-850-Z-B-01 For information on availability and pricing, contact your Account Manager.
For technical questions, please contact the Tektronix Support Center.- Full speed state analysis up to 50 MHz