다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

3 Series MDO, 4/5/6 Series MSO Applications Datasheet

Serial Triggering and Analysis

온라인으로 읽기:

On a serial bus, a single signal often includes address, control, data, and clock information. This can make isolating events of interest difficult. Optional serial applications transform the oscilloscope into a robust tool for debugging serial buses with automatic decode and analysis for I2C, SPI, CAN, CAN FD, LIN, FlexRay, 100BASE-T1, SENT, RS-232/422/485, UART, USB 2.0 (LS, FS, HS), Ethernet, I3C, SPMI, Spacewire, 8b10b, NRZ, MIL-STD-1553, ARINC`429, I2S, LJ, RJ, PSI5, DPHY, and TDM.

Key features

  • Automated Serial Decode and Analysis Options for I2C, SPI, I3C5, CAN, CAN FD, LIN, FlexRay, SENT5, RS-232/422/485, UART, USB 2.0, Ethernet5, SPMI5, MIL-STD-1553, ARINC`429, I2S, LJ, RJ, PSI5, DPHY, and TDM

  • Trigger on all the critical elements of a serial bus such as address, data, etc.
  • Decode all the critical elements of each message. No more counting 1s and 0s!
  • Search through long acquisitions with user-defined criteria to find specific messages
  • Event Table shows decoded serial bus activity in a tabular, time-stamped format for quick summary of system activity

5 Not available for 3 Series MDO.

Serial Triggering and Analysis Applications

The serial applications support automatic trigger and decode for I2C, SPI, CAN, CAN FD, LIN, FlexRay, 100BASE-T1, SENT, RS-232/422/485, UART, USB 2.0 (LS, FS, HS), Ethernet, I3C, SPMI, Spacewire, 8b10b, NRZ, MIL-STD-1553, ARINC`429, I2S, LJ, RJ, PSI5 and TDM buses, making it easier to locate, analyze, and debug events of interest.

Serial triggering

Trigger on packet content such as start of packet, specific addresses, specific data content, unique identifiers, etc. on popular serial interfaces such as I2C, SPI, CAN, CAN FD, LIN, FlexRay, SENT, RS-232/422/485, UART, USB 2.0, Ethernet, SPMI, MIL-STD-1553, ARINC`429, I2S, LJ, RJ, PSI5 and TDM.

Bus display

The bus display provides a higher-level, combined view of the individual signals (clock, data, chip enable, and so on) that make up your bus, making it easy to identify where packets begin and end and identifying sub-packet components such as address, data, errors, and so on.

Bus decoding

Tired of having to visually inspect the waveform to count clocks, determine if each bit is a 1 or a 0, combine bits into bytes, and determine the hex value?

Let the oscilloscope with a serial application do it for you! Once you've set up a bus, the oscilloscope decodes each packet on the bus, and displays the value in hex, binary, ASCII, or decimal (certain buses only) in the bus waveform.

Results table

In addition to seeing decoded packet data on the bus waveform itself, you can view all captured packets in a tabular view much like you would see in a software listing. Packets are time stamped and listed consecutively with columns for each component (Address, Data, and so on).

Wave Inspector® search

Serial triggering is very useful for isolating the event of interest, but once you've captured it and need to analyze the surrounding data, what do you do?

In the past, users had to manually scroll through the waveform counting and converting bits and looking for what caused the event. With a serial application, you can enable the oscilloscope to automatically search through the acquired data for user-defined criteria including serial packet content. Each occurrence is highlighted by a search mark. Rapid navigation between marks is as simple as pressing the ← and → arrow buttons on the oscilloscope front panel or the Search badge. The 3 Series MDO uses the arrows in the Search badge to navigate.

Characteristics

I2C characteristics

Bus setup options
Characteristic Description

I2C Sources

(Clock and Data)

Analog channels

Digital channels

Active Math channels6

Active Reference channels6

Thresholds Per-channel thresholds
Recommended Probing Single-ended
Include R/W in Address Yes or No
Address/Data Formats Available

Hex

Binary

6 Not available on 3 Series MDO

Display modes
Characteristic Description
Bus Bus only
Bus and Waveforms Simultaneous display of bus and digital waveforms
Results Table Decoded packet data in a tabular view

Bus trigger and search options
Characteristic Description
Trigger and/or Search On

Start

Repeated Start

Stop

Missing Ack

Address (7 or 10 bit)

Data (1-5 bytes)

Address and Data

Bus decode
Characteristic Description
Maximum Clock/Data Rate Up to 10 Mb/s (automatic selection)
Decode Display

Start (green bar)

Address (yellow packet)

Data (cyan packet)

Missing Ack (! symbol in red box)

Stop (red bar)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Color-coded I2C bus display, using hexadecimal display format.
MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Triggering on a specific address value on the I2C bus.

SPI characteristics

Bus setup options
Characteristic Description
SPI Sources

(Clock, Data, and Slave Select)

Analog channels

Digital channels

Active Math channels7

Active Reference channels7

Thresholds Per-channel thresholds
Recommended Probing Single-ended
Decode Configuration:

Framing

Clock

Slave Select

Data

Word Size

Bit Order

Slave Select (3-wire SPI), Idle Time (2-wire SPI)

Rising or Falling Edge

Active High or Active Low

Active High or Active Low

4 - 32 bits

Most Significant (MS) First, Least Significant (LS) First

Formats Available

Hex

Binary

7 Not available on 3 Series MDO.

Display modes
Characteristic Description
Bus Bus only
Bus and Waveforms Simultaneous display of bus and digital waveforms
Results Table Decoded packet data in a tabular view

Bus trigger and search options
Characteristic Description
Trigger and/or Search On

SS Active (3-wire SPI)

Start of Frame (2-wire SPI)

Data (1-16 bytes)

Bus decode
Characteristic Description
Maximum Clock/Data Rate Up to 10 Mb/s (automatic selection)
Decode Display

Start (green bar)

Data (cyan packet)

Stop (red bar)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
SPI bus, captured with digital channels, showing binary display format of the color-coded SPI bus decoding.
MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Triggering on a specific data value on the SPI bus.

I3C characteristics8

8 I3C is not available on 3 Series MDO.

Bus setup options
Characteristic Description

I3C Sources

(Clock and Data)

Analog channels

Digital channels

Active Math channels

Active Reference channels

Thresholds

Per-channel thresholds

Speed

High Speed (480 Mb/s)

Full Speed (12 Mb/s)

Low Speed (1.5 Mb/s)

Recommended Probing

Single-ended

Formats Available

Hex

Binary

Mixed Hex

Display modes
Characteristic Description

Bus

Bus only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Bus search options
Characteristic Description

Search On

Start

Repeated Start

Address

Data

I3C SDR Direct Message

I3C SDR Broadcast Message

I3C DDR Message

Errors

Hot-Join

Direct Message End

Stop

HDR Restart

HDR Exit

Bus decode
Characteristic Description
Maximum Clock/Data Rate Up to 12.5 Mb/s (automatic selection)
Decode Display

Start (green bar)

Address (yellow packet)

Commands (cyan packet)

Data (cyan packet)

Parity (purple packet)

Stop (red bar)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
The Protocol Decode Results Table provides a time-stamped, tabular view of all captured packets on the I3C bus.
MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Searching on a specific data pattern on the I3C bus and automatically searching on Sync.

RS-232, RS-422, RS-485, UART characteristics

Bus setup options
Characteristic Description
Sources, RS-232, UART

Analog channels

Digital channels

Active Math channels9

Active Reference channels9

Sources, RS-422, RS-485

Analog channels

Active Math channels9

Active Reference channels9

Polarity

Normal (RS-232)

Inverted (UART, RS-422, RS-485)

Parity

None

Odd

Even

Recommended Probing, RS-232, UART Single-ended
Recommended Probing, RS-422, RS-485 Differential
Number of Bits 7 - 9
Formats Available

Hex

Binary

ASCII

Packet View

9 Not available on 3 Series MDO.

Display modes
Characteristic Description
Bus Bus only
Bus and Waveforms Simultaneous display of bus and digital waveforms
Results Table Decoded packet data in a tabular view

Bus trigger and search options
Characteristic Description
Trigger and/or Search On

Start

End of Packet

Data (1 - 10 bytes)

Parity Error

Bus decode
Characteristic Description
Maximum Clock/Data Rate Up to 15 Mb/s

For 3 Series MDO: Up to 10 Mb/s

Bit Rate Selection

300 b/s

1,200 b/s

2,400 b/s

9,600 b/s

19,200 b/s

38,400 b/s

115,200 b/s

921,600 b/s

Custom (All but 3 Series MDO: 50 b/s - 15 Mb/s

Custom (for 3 Series MDO): 50 b/s - 10 Mb/s

Decode Display

Start (green packet)

Data (cyan packet)

Parity (purple packet)

Parity Error (red packet)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
RS-232 bus setup and ASCII display, showing assignment of source signal, digital threshold, and polarity.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
RS-232 bus shown in Packet View format, with the Wave Inspector search automatically searching for the data string "Tek".

CAN characteristics

Bus setup options
Characteristic Description
Source for CAN_H, CAN_L, Rx, or Tx (single-ended probing)

Analog channels

Digital channels

Active Math channels10

Active Reference channels10

Source for Diff

(differential probing)

Analog channels

Active Math channels10

Active Reference channels10

Thresholds Per-channel thresholds
Recommended Probing:

CAN_H, CAN_L, Rx, Tx

Diff

Single-ended

Differential

Bit Rate Selection:

Predefined list of rates

Custom

10 kb/s - 1 Mb/s

All but 3 Series MDO: 1 kb/s - 1 Mb/s

3 Series MDO: 10 kb/s - 1 Mb/s

Sample Point

All but 3 Series MDO: 0% - 100% of bit period of unit interval

3 Series MDO: 5% - 95% of bit period of unit interval

Formats Available

Mixed Hex

Hex

Binary

Symbolic (.dbc)10

10 Not available on 3 Series MDO.

Display modes
Characteristic Description

Bus

Bus only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Bus trigger and search options
Characteristic Description

Trigger and/or Search On

Start of Frame

Type of Frame (Data, Remote, Error, Overload)

Identifier (Standard or Extended)

Data (number of bytes 1-8, trigger or search when =, ≠, <, ≤, >, ≥)

Identifier and Data

EOF

Missing Ack

Bit Stuff Error

Symbolic bus search options
Characteristic Description

Message

As defined by the .dbc file1

Message and Signal

As defined by the .dbc file1

Bus decode
Characteristic Description
Maximum Clock/Data Rate Up to 1 Mb/s (automatic selection)
Decode Display

Start of Frame (green bar)

Identifier (yellow packet)

Data Length Control (purple packet)

Data (cyan packet)

CRC (purple packet)

End of Frame (red bar)

Errors (red packet)

Protocol Decode Results Table provides a time-stamped, tabular view of all captured packets on the CAN bus.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Triggering on a specific extended Identifier value on the CAN bus.

CAN FD (ISO and non-ISO) characteristics

Bus setup options
Characteristic Description

Source for CAN_H, CAN_L, Rx, or Tx

(single-ended probing)

Analog channels

Digital channels

Active Math channels11

Active Reference channels11

Source for Diff

(differential probing)

Analog channels

Active Math channels11

Active Reference channels11

Thresholds Per-channel thresholds

Recommended Probing:

CAN_H, CAN_L, Rx, or Tx

Diff

Single -ended

Differential

Version

ISO

non-ISO

SD Bit Rate Selection:

Predefined list of rates

Custom

10 kb/s - 1 Mb/s

All but 3 Series MDO: 50 kb/s - 10 Mb/s

3 Series MDO: 10 kb/s - 1 Mb/s

FD Bit Rate Selection:

Predefined list of rates

Custom

All but 3 Series MDO: 1 Mb/s - 16 Mb/s

3 Series MDO: 1 Mb/s - 7 Mb/s

All but 3 Series MDO: 500 kb/s - 16 Mb/s

3 Series MDO: 500 kb/s - 7 Mb/s

Sample Point

All but 3 Series MDO: 55% - 95% of bit period of unit interval

3 Series MDO: 15% - 95% of bit period of unit interval

Formats Available

Mixed Hex

Hex

Binary

Symbolic (.dbc)11

11 Not available on 3 Series MDO.

Display modes
Characteristic Description
Bus Bus only
Bus and Waveforms Simultaneous display of bus and digital waveforms
Results Table Decoded packet data in a tabular view

Bus trigger and search options
Characteristic Description

Trigger and/or Search On

Start of Frame

Type of Frame (Data, Remote, Error, Overload)

FD Bits (Bit Rate Switch bit, Error State Indicator bit)

Identifier (Standard or Extended)

Data (1-8 bytes, trigger or search when =, ≠, <, ≤, >, ≥)

Identifier and Data

End of Frame

Error (Missing Ack, Bit Stuffing Error, FD Form Error, Any Error)

Symbolic bus search options
Characteristic Description

Message

As defined by the .dbc file1

Message and Signal

As defined by the .dbc file1

Bus decode
Characteristic Description

Decode Display

Start of Frame (green bar)

Identifier (yellow packet)

Data Length Control (purple packet)

Data (cyan packet)

CRC (purple packet)

End of Frame (red bar)

Errors (red packet)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Protocol Decode Results Table provides a time-stamped, tabular view of all captured packets on the CAN FD bus.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Triggering on a specific Identifier value and data pattern on the CAN FD bus and automatically searching on the same data pattern.

LIN characteristics

Bus setup options
Characteristic Description
LIN Source

Analog channels

Digital channels

Active Math channels12

Active Reference channels12

Thresholds Per-channel thresholds
Recommended Probing Single-ended
Polarity

Normal

Inverted

Bit Rate Selection:

Predefined list of rates

Custom

1.2 kb/s - 19.2 kb/s

All but 3 Series MDO: 1 kb/s - 100 kb/s

3 Series MDO: 800 b/s - 100 kb/s

Sample Point

All but 3 Series MDO: 0% - 100% of bit period of unit interval

3 Series MDO: 10% - 90% of bit period of unit interval

LIN Standard

V 1.x

V 2.x

Both

Include Parity Bits with ID

Yes

No

Formats Available

Hex

Binary

Mixed

12 Not available on 3 Series MDO.

Display modes
Characteristic Description
Bus Bus only
Bus and Waveforms Simultaneous display of bus and digital waveforms
Results Table Decoded packet data in a tabular view

Bus trigger and search options
Characteristic Description
Trigger and/or Search On

Sync

Identifier

Data (number of bytes 1-8, trigger or search when =, ≠, <, ≤, >, ≥, Inside Range, Outside Range)

ID and Data

Wakeup Frame

Sleep Frame

Error (Sync, ID Parity, Checksum)

Bus decode
Characteristic Description
Maximum Clock/Data Rate Up to 100 kb/s, by LIN definition up to 20 kb/s (for automated decoding of bus)
Decode Display

Start of Frame (green bar)

Sync

Identifier (yellow packet)

Data (cyan packet)

CRC (purple packet)

Errors (red packet)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Protocol Decode Results Table provides a time-stamped, tabular view of all captured LIN packets.
MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Display of multiple LIN and CAN buses, showing timing between the buses.

FlexRay characteristics

Bus setup options
Characteristic Description
Source for Differential Probing (Bdiff)

Analog channels

Active Math channels13

Active Reference channels13

Source for Single-ended Probing (BP, BM)

Analog channels

Digital channels

Active Math channels13

Active Reference channels13

Source for Single-ended Probing (Tx, Rx)

Analog channels

Digital channels

Active Math channels13

Active Reference channels13

Thresholds:

Bdiff

BP, BM (analog channels)

BP, BM (digital channels)

Tx, Rx

High and Low thresholds

High and Low thresholds

Single threshold

Single threshold

Recommended Probing:

Bdiff, BP, BM

Tx, Rx

Differential

Single-ended

Channel Type

A

B

Bit Rate Selection:

Predefined list of rates

Custom

2.5 Mb/s, 5 Mb/s, 10 Mb/s

1 Mb/s - 10 Mb/s

Formats Available

Hex

Binary

Mixed Hex (Decimal: ID, Len, and Count; Hex: Data and CRCs)

13 Not available on 3 Series MDO.

Display modes
Characteristic Description
Bus Bus only
Bus and Waveforms Simultaneous display of bus and digital waveforms
Results Table Decoded packet data in a tabular view

Bus trigger and search options
Characteristic Description
Trigger and/or Search On

Start of Frame

Indicator Bits (Normal, Payload, Null, Sync, Startup)

Cycle Count (when =, ≠, <, ≤, >, ≥)

Header Fields (Indicator Bits, Identifier, Payload Length, Header CRC, and Cycle Count)

Identifier (when =, ≠, <, ≤, >, ≥)

Data (when =, ≠, <, >, ≤, ≥)

Identifier and Data

End Of Frame (Static, Dynamic)

Error (Header CRC, Trailer CRC, NULL Frame in Static, NULL Frame in Dynamic, Sync Frame in Dynamic, Start Frame No Sync)

Bus decode
Characteristic Description
Maximum Clock/Data Rate Up to 10 Mb/s (for automated decoding of bus)
Decode Display

TTS (purple box)

Start (green bracket)

Frame ID (yellow box)

Payload Length (purple box)

Headers (purple box)

Cycle Count (yellow box)

Data (cyan box)

CRC, DTS, CID (purple box)

Stop (red bracket)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Decoded FlexRay bus, with the acquisition triggered on a specified identifier value.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Decoded FlexRay bus, with all data values in a specific range marked with pink brackets.

SENT Characteristics14

14 SENT is not available on 3 Series MDO.

Bus setup options
Characteristic Description
SENT source

Analog channels

Digital channels

Active Math channels

Active Reference channels

Thresholds Per-channel thresholds
Recommended Probing Single-ended
Polarity

Normal

Inverted

Clock Tick 1 μs - 300 μs
Tick Tolerance 1% - 30%
Fast Data Channels 1 or 2
Data Nibbles

(1 Fast Data Channel)

3, 4, or 6 nibbles
Channel Widths (C1/C2)

(2 Fast Data Channels)

12/12, 14/10, or 16/8 bits
Pause Pulse

Yes

No

Slow Channel

None

Enhanced w/ 4-bit ID

Enhanced w/ 8-bit ID

Short

Formats Available

Mixed Hex

Binary

Hex

Mixed Decimal

Display modes
Characteristic Description
Bus Bus only
Bus and Waveforms Simultaneous display of bus and digital waveforms
Results Table Decoded packet data in a tabular view

Bus trigger options
Characteristic Description
Trigger On

Start of Packet

Fast Channel(s) (Status/Communication, Data)

Slow Channel (Message ID, Data)

CRC Error (Fast channel, Slow channel)

Bus search options
Characteristic Description
Search On

Start of Packet

Fast Channel(s) (Status/Communication, Data)

Slow Channel (Message ID, Data)

Pause Pulse (Number of Ticks)

Error (Frame Length, Fast channel CRC, Slow channel CRC)

Bus decode
Characteristic Description
Maximum Clock/Data Rate Up to 10 Mb/s (for automated decoding of bus)
Decode Display

Sync (green packet)

Fast Channel Status (purple packet)

Slow Channel Message ID (yellow packet)

Data (cyan packet)

CRC (purple packet)

Pause (purple packet)

Errors (red packet)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Protocol Decode Results Table provides a time-stamped, tabular view of all captured packets on the SENT bus.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Triggering on a specific Fast Channel Status and data pattern on the SENT bus and automatically searching on the same data pattern.

MIL-STD-1553 characteristics

Bus setup options
Characteristic Description
MIL-STD-1553 Source

Analog channels

Active Math channels

Active Reference channels

Polarity

Normal

Inverted

Thresholds

Single-ended: Per-channel thresholds

Differential: High and low thresholds

Recommended Probing Single-ended or differential
Bit Rate 1 Mb/s per the standard
Response Time 2 µs-100 µs
Formats Available

Mixed Hex

Mixed ASCII

Hex

Binary

Display modes
Characteristic Description
Bus Bus only
Results Table Decoded packet data in a tabular view

Bus trigger and search options
Characteristic Description
Trigger and/or Search On

Sync

Command (Transmit/Receive Bit, Parity, Subaddress / Mode, Word Count / Mode Count, and RT Address =, ≠, <, ≤, >, ≥, Inside Range, Outside Range)

Status (Parity,

Bit 9 - Message Error,

Bit 10 - Instrumentation,

Bit 11 - Service Request,

Bit 15 - Broadcast Command Received,

Bit 16 - Busy,

Bit 17 - Subsystem Flag,

Bit 18 - Dynamic Bus Control Acceptance,

Bit 19 - Terminal Flag,

and Data =, ≠, <, ≤, >, ≥,

Inside Range, Outside Range)

Data (Parity, and Data =, ≠, <, ≤, >, ≥,

Inside Range, Outside Range)

Time (RT / IMG) (> Maximum, < Minimum, Inside range, Outside Range)

Error (Parity Error, Sync Error, Manchester Error (trigger only), Non-contiguous Data)

Bus decode
Characteristic Description
Maximum Clock/Data Rate Up to 1Mb/s (for automated decoding of bus)
Decode Display

Start (green bar)

Sync (purple packet with Word Type identified)

Address (yellow packet)

R/T (purple packet)

Word Count (purple packet)

Data (cyan packet)

Parity (purple packet)

Errors (red packet)

Stop (red bar)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Protocol Decode Results Table provides a time-stamped, tabular view of all captured MIL-STD-1553 packets.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Triggering on a specific command pattern on the MIL-STD-1553 bus and automatically searching on the same pattern.

ARINC 429 characteristics

Bus setup options
Characteristic Description
ARINC 429 Source

Analog channels

Active Math channels

Active Reference channels

Signal Type

Differential

Polarity

Normal

Inverted

Thresholds

High and low thresholds

Recommended Probing

Differential

Bit Rate Selection:

Predefined list of rates

Custom

12.5 kb/s, 100 kb/s

10 kb/s - 1 Mb/s

Data Format

Data (19 bits)

SDI+Data (21 bits)

SDI+Data+SSM (23 bits)

Formats Available

Mixed Hex

Hex

Binary

Display modes
Characteristic Description
Bus Bus only
Results Table Decoded packet data in a tabular view

Bus trigger and search options
Characteristic Description
Trigger and/or Search On

Word Start

Label (when =, ≠, <, ≤, >, ≥, Inside Range, Outside Range)

Data (when =, ≠, <, ≤, >, ≥, Inside Range, Outside Range)

Label and Data (Label value and Data =, ≠, <, ≤, >, ≥, Inside Range, Outside Range)

Word End

Error (Any Error, Parity Error, Word Error, Gap Error)

Bus decode
Characteristic Description
Decode Display

Start (green bracket)

Label (yellow box)

Source Destination Identifier (yellow box)

Data (cyan box)

Sign/Status Matrix (purple box)

Parity (purple box)

Stop (red bracket)

Error (red box)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Decoded ARINC 429 bus, with the acquisition triggered on a specified label value.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Decoded ARINC 429 bus, with all data values in a specific range marked with pink brackets.

Audio characteristics

Bus setup options
Characteristic Description

Audio Sources (Bit Clock, Word Select, Data)

Analog channels

Digital channels

Active Math channels15

Active Reference channels15

Thresholds

Per-channel thresholds

Bit Clock Polarity

Rising Edge

Falling Edge

Word Select Polarity

Normal

Invert

Data Polarity

Active High

Active Low

Word Size

4 - 32 bits

Formats Available

Hex

Binary

Signed Decimal

15 Not available on 3 Series MDO.

Display modes
Characteristic Description

Bus

Bus only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Bus trigger and search options
Characteristic Description

Trigger and/or Search On

Word Select (I2S, LJ, RJ only)

Frame Sync (TDM only)

Data (when =, ≠, <, >, ≤, ≥, Inside Range, Outside Range; Left, Right, or Either Word)

Bus decode
Characteristic Description

Maximum Clock/Data Rate

All but 3 Series MDO: Up to 10 Mb/s (for automated decoding of bus)

3 Series MDO: Up to 12.5 Mb/s (for automated decoding of I2S/LJ/RJ bus)

3 Series MDO: Up to 25 Mb/s (for automated decoding of TDM bus)

Decode Display

Left Channel Data (I2S, LJ, RJ) (yellow box)

Right Channel Data (I2S, LJ, RJ) (cyan box)

Channel 1 Data (TDM) (yellow box)

Channel 2 - N Data (TDM) (cyan box)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Decoded I2S bus, with data values displayed in signed decimal format, and the MSO triggered on a specific data value.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Decoded I2S bus, with data values displayed in hex and Results Table format, and the Wave Inspector automatic search marking all occurrences of the data values equal to 0X hex.

USB 2.0 Characteristics

Bus setup options
Characteristic Description
USB 2.0 Source(s)

Analog channels

Digital channels (single-ended)

Active Math channels

Active Reference channels

Thresholds Per-channel thresholds
Speed

High Speed (480 Mb/s)

Full Speed (12 Mb/s)

Low Speed (1.5 Mb/s)

Recommended Probing, LS and FS Single-ended
Recommended Probing, HS Differential
Formats Available

Mixed Hex

Hex

Binary

Mixed ASCII

Display modes
Characteristic Description
Bus Bus only
Bus and Waveforms Simultaneous display of bus and digital waveforms
Results Table Decoded packet data in a tabular view

Bus trigger options
Characteristic Description
Trigger On

Sync

Reset

Suspend

Resume

End of Packet

Token (address) Packet

Data Packet

Handshake Packet: ACK, NAK, STALL, NYET (HS only)

Special Packet: PRE (FS only), ERR, SPLIT, PING, Reserved

Error: PID check, CRC5 or CRC16, Bit stuffing (LS and FS only)

Bus Search options
Characteristic Description
Search On

Sync

Reset

Suspend

Resume

End of Packet

Token (address) Packet

Data Packet

Handshake Packet: ACK, NAK, STALL, NYET (HS only)

Special Packet: PRE (FS only), ERR, SPLIT, PING, Reserved

Error: PID check, CRC5 or CRC16, Bit stuffing (LS and FS only)

Bus decode
Characteristic Description
Decode Display

Start of packet (green bar)

Sync (green packet)

PID (yellow packet)

Token (address) (yellow packet)

Data (cyan packet)

CRC (purple packet)

Error (red packet)

End of packet (red bar)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Protocol Decode Results Table provides a time-stamped, tabular view of all captured packets on the USB bus.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Triggering on a specific data pattern on the USB 2.0 bus and automatically searching on Sync.

Ethernet characteristic16

16 Ethernet is not available on 3 Series MDO.

Bus setup options
Characteristic Description

Ethernet Source(s)

Analog channels

Active Math channels

Active Reference channels

Thresholds

Per-channel thresholds

Speed

10BASE-T

100BASE-TX

Recommended Probing

Differential

Formats Available

Mixed Hex

Hex

Binary

Mixed ASCII

Display modes
Characteristic Description

Bus

Bus only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Bus trigger options
Characteristic Description

Trigger On

Start Frame Delimiter

MAC Addresses

Q-Tag Control Information

MAC Length/Type

IPv4 Header

TCP Header

MAC Data

TCP-IPv4 Client Data

Idle

End of Packet

Frame Check Sequence (CRC) Error

Bus search options
Characteristic Description

Search On

Start Frame Delimiter

MAC Addresses

Q-Tag Control Information

MAC Length/Type

IPv4 Header

TCP Header

MAC Data

TCP-IPv4 Client Data

Idle

End of Packet

Frame Check Sequence (CRC) Error

Bus decode
Characteristic Description

Decode Display

Start of Packet (green bar)

Preamble (purple packet)

SFD (purple packet)

Address (yellow packet)

EtherType (yellow packet)

IP packet (purple packet)

Data (cyan packet)

IPv4 packet (pink packet)

TCP packet (white packet)

Frame Check Sequence (yellow packet)

Error (red packet)

End of packet (red bar)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Protocol Decode Results Table provides a time-stamped, tabular view of all captured packets on the 10BASE-T Ethernet bus

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Triggering and automatically searching on the 100BASE-TX Ethernet bus.

SPMI characteristics17

17 SPMI is not available on 3 Series MDO.

Bus setup options
Characteristic Description

SPMI Sources (Clock and Data)

Analog channels

Digital channels

Active Math channels

Active Reference channels

Thresholds

Per-channel thresholds

Recommended Probing

Single-ended

Formats Available

Mixed Hex

Hex

Binary

Display modes
Characteristic Description

Bus

Bus only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Bus trigger options
Characteristic Description

Trigger On

Sequence Start Condition (SSC)

Reset

Sleep

Shutdown

Wakeup

Authenticate

Master Read

Master Write

Register Read

Register Write

Extended Register Read

Extended Register Write

Extended Register Read Long

Extended Register Write Long

Device Descriptor Block Master Read

Device Descriptor Block Slave Read

Register 0 Write

Transfer Bus Ownership

Parity Error

Bus search options
Characteristic Description

Search On

Sequence Start Condition (SSC)

Reset

Sleep

Shutdown

Wakeup

Authenticate

Master Read

Master Write

Register Read

Register Write

Extended Register Read

Extended Register Write

Extended Register Read Long

Extended Register Write Long

Device Descriptor Block Master Read

Device Descriptor Block Slave Read

Register 0 Write

Transfer Bus Ownership

Parity Error

Bus decode
Characteristic Description

Decode Display

Arbitration Start (yellow bar)

Connect Bit (purple packet)

Master ID (purple packet)

Alert Bit (yellow packet)

Slave Request Bit (yellow packet)

Master Priority Level (gray packet)

SSC (green bar)

Command Frame, including Byte Count18 (yellow packet)

Address (yellow packet)

Data (cyan packet)

Parity (purple packet)

Ack/Nack (purple packet)

Parity error (red packet)

End of packet (red bar)

18 The actual decimal Byte Count is displayed in Mixed Hex format, but the raw value is shown in Binary and Hex formats.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Protocol Decode Results Table provides a time-stamped, tabular view of all captured packets on the SPMI bus.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Automatically searching the SPMI bus for the Transfer Bus Ownership command

SpaceWire characteristics

Bus setup options
Characteristic Description

SpaceWire Sources

(Strobe and Data)

Analog Channels

Digital Channels

Active Math Channels

Active Reference Channels

Thresholds

Per-Channel Thresholds

Recommended Probing

Differential

Address/Data Formats Available

Hex

Binary

Display modes
Characteristic Description

Bus

Bus Only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Bus search options
Characteristic Description

Search On

Synchronization

Control Code

Control Character

Data

Errors

Bus decode
Characteristic Description

Maximum Clock/Data Rate

2 Mbits/sec to 200 Mbits/sec

Decode Display

Null

Control Character

Control Code

FCT

Time-Code

Parity

Data-Control Flag

Data

End Of Packet

Error End Of Packet

Escape Sequence

Escape Error

Start FCT

Start NULL

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Searching on a specific data pattern on the SpaceWire bus and automatically searching on Sync.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
The Protocol Decode Results Table provides a time-stamped, tabular view of all captured packets on the SpaceWire bus.

Automotive Ethernet (100BASE-T1) characteristics

Bus setup options
Characteristic Description

Ethernet Source(s)

Analog Channels

Active Math Channels

Active Reference Channels

Thresholds

Per-channel Thresholds

Speed

100 Mbits/sec

Recommended Probing

Differential

Formats Available

Mixed Hex

Hex

Binary

Mixed ASCII

Display modes
Characteristic Description

Bus

Bus Only

Results Table

Decoded packet data in a tabular view

Bus search options
Characteristic Description

Search On

Start of Frame

Start of Frame Delimiter

MAC Addresses

Q-Tag Control Information

MAC Length/Type

IPv4 Header

TCP Header

MAC Data

TCP-IPv4 Client Data

End of Packet

Frame Check Sequence (CRC) Error

Bus decode
Characteristic Description

Maximum Clock/Data Rate

100 Mbits/sec

Decode Display

Start of Packet (green bar)

Preamble (purple packet)

SFD (purple packet)

Address (yellow packet)

EtherType (yellow packet)

IP packet (purple packet)

Data (cyan packet)

IPv4 packet (pink packet)

TCP packet (white packet)

Frame Check Sequence (yellow packet)

Error (red packet)

End of packet (red bar)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
The Protocol Decode Results Table provides a time-stamped, tabular view of all captured packets on the Automotive Ethernet (100BASE-T1) bus.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Searching on a specific data pattern on the Automotive Ethernet (100BASE-T1) bus and automatically searching on Start of Frame.

8b10b Characteristics

Bus setup options
Characteristic Description

8b10b Sources

(Strobe and Data)

Analog Channels

Digital Channels

Active Math Channels

Active Reference Channels

Thresholds

Per-Channel Thresholds

Recommended Probing

Differential

Formats Available

Hex

Binary

Symbolic

Display modes
Characteristic Description

Bus

Bus Only

Bus and Waveforms

Simultaneous display of bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Bus search options
Characteristic Description

Search On

Symbols [Format:8bit,10bit&symbol]

Errors

Bus decode
Characteristic Description

Maximum Clock/Data Rate

1 Tbits/sec

Decode Display

Control Symbol (yellow packet)

Data Symbol (cyan packet)

Error Handling

Invalid Symbols

Running Disparity (6 bit and 4 bit)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Searching on a specific data symbol in symbol format on a 8b10b bus

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
The Protocol Decode results table provides time-stamped, tabular view of all captured packets on a 8b10b bus

NRZ Characteristics

Bus setup options
Characteristic Description

NRZ Source(s)

Analog Channels

Digital Channels

Active Math Channels

Active Reference Channels

Thresholds

Per-channel Thresholds

Recommended Probing

Differential

Bit Order

MSB First

LSB First

Polarity

Normal

Invert

Formats Available

Hex

Binary

Display modes
Characteristic Description

Bus

Bus Only

Bus and Waveforms

Simultaneous display of bus and digital waveforms.

Results Table

Decoded packet data in a tabular view

Bus search options
Characteristic Description

Search On

Data Bytes [Maximum 5]

Bus decode
Characteristic Description

Maximum Clock/Data Rate

1Gbits/sec

Decode Display

Data (cyan packet)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Searching on a specific data symbol in symbol format in the NRZ bus

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
The Protocol Decode results table provides time-stamped, tabular view of all captured packets on the NRZ bus

PSI5 characteristics

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
PSI5 Sensor to ECU configuration

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
PSI5 ECU to Sensor configuration

Bus setup options
Characteristic Description

PSI5 Sources

Analog channels

Digital channels

Active Math channels

Active Reference channels

Thresholds

Per-channel thresholds

Recommended Probing

Sensor to ECU

Current probe with minimum current rating of less than 50mA - TCP2020, TCP202A

ECU to Sensor

Differential Voltage probe - TDP1000, TDP1500, and TAP1500

Direction

ECU to Sensor

Sensor to ECU

Direction -Sensor to ECU

Mode

Slow (83.3 kbps)

Standard (125 kbps)

Fast (189 kbps)

Data A

10 - 24 bits

Data B

0 - 12 bits

Frame Control

0 - 4 bits

Status

0 - 3 bits

Direction - ECU to Sensor

Sync Bit Period

1 us to 300 us

Sync Mode

Pulse Width

Tooth Gap

Data Format

Nibble

Byte

Decode Format

Hex

Binary

Mixed Hex

Display modes
Characteristic Description

Bus

Bus only

Bus and Waveforms

Simultaneous displays bus and digital waveforms

Results Table

Decoded packet data in a tabular view

Bus search options
Characteristic Description

Mark On

Direction - Sensor to ECU

Start [Start of packet]

Status

Data [Region B and Region A]

Block ID

Sensor Status [5 different status]

Errors [Parity CRC and any]

Direction - ECU to Sensor

Start [Start of packet]

Status

Data [4 or 8 bits]

Function Code

Sensor Address

Register Address

CRC Error

Bus Search option is depend on the direction in Bus Configuration.

Bus decode
Characteristic Description
Decode Display Direction -Sensor to ECU Packets

Message Field (Yellow Field)

Status (Yellow Field)

Frame Control (Yellow Field)

Data B (Cyan Field)

Data A (Cyan Field)

Parity or CRC (Purple Field)

Direction - ECU to Sensor Packets

Sensor Address (Yellow Field)

Function Code (Yellow Field)

Register Address (Yellow Field)

Data (Cyan Field)

CRC (Purple Field)

Error Type

Parity

CRC

Response Code (Sensor to ECU)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
PSI5 Search configuration

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
PSI5 Results table

MDIO Characteristics

Bus setup options
Characteristic Description
MDIO Sources (Clock, Data)

Analog channels

Digital channels

Active Math channels

Active Reference channels

Thresholds Pre-channel thresholds
Recommended Probing Single-ended
Formats Available

Hex

Binary

Mixed Hex

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Bus configuration

Bus search options
Characteristic Description
Search On

Start Packet

OpCode

Physical Address

Register Address

Data

Error: Any, OpCode Error, Device Type Error

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Search configuration

Display modes
Characteristic Description
Bus Bus only
Bus and Waveforms Simultaneous display of bus and digital waveforms
Result Table Decoded packet data in tabular view

Bus decode
Characteristic Description
Maximum Clock/Data Rate Maximum frequency of up to 2.5 MHz
Decode Display

Start Packet (Green)

Clause (Green)

OpCode (Yellow)

Physical Address (Yellow)

Register Address (Yellow)

Device Type (Yellow)

Data/Address (Cyan)

Error: Any, OpCode Error,

Device Type Error (Red)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9

SVID characteristics

Bus setup options
Characteristic Description
SVID Sources (Clock, Data, Alert)

Analog channels

Digital channels

Active Math channels

Active Reference channels

Thresholds Pre-channel thresholds
Recommended Probing Single-ended
Formats Available

Hex

Binary

Mixed Hex

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Bus configuration

Bus search options
Characteristic Description
Search On

Start

Slave Address

Command

Payload: Master, Slave, Either

Errors: Any, Missing Ack, Parity

End

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Search configuration

Display modes
Characteristic Description
Bus Bus only
Bus and Waveforms Simultaneous display of bus and digital waveforms
Result Table Decoded packet data in tabular view

Bus decode
Characteristic Description
Maximum Clock/Data Rate Maximum frequency of 26.25 MHz
Decode Display

Start (Green)

Slave Address (Yellow)

Command (Yellow)

Master Payload (Cyan)

Master Parity (Purple)

End (Purple)

Turnaround (Purple)

Ack (Purple)

Slave Payload (Cyan)

Slave Parity (Purple)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9

e-USB2

Bus setup options
Characteristic Description
Source(s)

Analog channels

Digital channels(single-ended)

Active Math channels

Active Reference channels

Thresholds Pre-channel thresholds
Speeds

Speed High Speed (480 Mb/s)

Full Speed (12 Mb/s)

Low Speed (1.5 Mb/s)

Recommended Probing, HS, LS, and FS Single-ended [Active Single Ended TAP1500]
Formats Available

Mixed Hex

Hex

Binary

Mixed ASCII

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Bus configuration

Bus search options
Characteristic Description
Search On

Characteristic Description

Search On Sync

Reset

Suspend

Resume/Wake

Connect

Control Message

Port Reset

Port Configuration

Device Chirp

Host Chirp

End of Packet

Token (address) Packet

Data Packet

Handshake Packet: ACK, NAK, STALL, NYET (HS only)

Special Packet: PRE (FS only), ERR, SPLIT, PING

Reserved

Error: PID check, CRC5 or CRC16, Bit stuffing (LS and FS only)

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Search configuration

Bus decode
Characteristic Description
Decode Display

Start of packet (green bar)

Sync (green packet)

PID (yellow packet)

Token (address) (yellow packet)

Data (cyan packet)

CRC (purple packet)

Error (red packet)

End of packet (red bar)

Control Message (Yellow packet)

Zeros (Blue packet)

Ack (Purple packet)

Port Reset (Red Bar)

Port Configuration(Green Bar)

Connect (Green Bar)

Resume/Wake(Green Bar)

Device Chirp(Green Bar)

Host Chirp (Green Bar)

End Of reset(Red Bar)

Results & other features
Characteristic Description

Table view

* Depends on the Model

View more than 10000* points

Save Save Result table as CSV
Sessions Save sessions of your protocol setup

Simultaneous Buses

* Depends on the Model

Load multiple Buses simultaneously*
Upcoming Future addition Timing Measurements for Protocols
Search Table Displays the Search hits along with Delta time difference between hits

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Results table with decoded waveform

Manchester Characteristics

Bus setup options
Characteristic Description
Manchester Sources

Analog channels

Digital channels(single-ended)

Active Math channels

Active Reference channels

Bus Setup: Threshold Idle Bits Transition For ‘0’ Tolerance
MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Recommended Probing Differential/Single ended
Formats Available

Hex

Binary

Packet View
MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9

Bus search options
Characteristic Description
Search On

Characteristic Description

Search On Sync

Reset

Suspend

Resume/Wake

Connect

Control Message

Port Reset

Port Configuration

Device Chirp

Host Chirp

End of Packet

Token (address) Packet

Data Packet

Handshake Packet: ACK, NAK, STALL, NYET (HS only)

Special Packet: PRE (FS only), ERR, SPLIT, PING

Reserved

Error: PID check, CRC5 or CRC16, Bit stuffing (LS and FS only)

Display modes
Characteristic Description
Bus Bus Only
Bus and WaveformsSimultaneous display of bus and digital waveforms
Results TableDecoded packet data in a tabular view with columns containing:

Sync Pattern

Packet Header

Packet Data

Packet Trailer

Error

Bus decode
Characteristic Description
Maximum Clock/Data Rate1Gbps
Decode Display

Control Field (yellow packet)

Payload Field (cyan packet)

Error Handling

Parity

Manchester

Search On

When Packet View is ON

Sync Bits

Header

Data

Trailer

Errors

When Packet View is OFF

Data

Errors

Bus search options
Characteristic Description
Search On (Packet View ON)

Sync Bits

Header

Data

Trailer

Errors
MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Search On (Packet View OFF)

Data

Errors
MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9

Results & other features
Characteristic Description
Table view

* Depends on the Model

View more than 10000* points
SaveSave Result table as CSV
Results TableSessions
Simultaneous Buses

* Depends on the Model

Load multiple Buses simultaneously*
Upcoming Future additionTiming Measurements for Protocols
Search TableDisplays the Search hits along with Delta time difference between hits

DPHY(DSI2.0/CSI2.0) Characteristics

Bus setup options
Characteristic Description
DPHY Sources

Analog channels

Math channels

Active Reference channels

Salient Features

Decode capability in for CSI/DSI protocols.

Decode capability for Escape mode.

Decode capability for High speed burst mode.

Decode capability for 8b9b line encoding in LPDT and HS mode.

Search capability for SoT/EoT

Search capability for long and short packets

Search capability for Escape mode

Search capability for Errors like ECC,CRC and Any

Bus Setup:
MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Recommended Probing

Clock – Single Ended/Differential

Data – Single Ended
Formats Available

Hex

Binary

Mixed Hex

8b9b encoding modeSelect line encoding in LPDT and HS mode.

Display modes
Characteristic Description
Bus Bus Only
Bus and WaveformsSimultaneous display of bus and digital waveforms
Result TableDecoded packet data in a tabular view with columns containing:

Mode

Data Type

Virtual Identifier

ECC

Data

CRC

End

Error

Bus decode
Characteristic Description
Maximum Clock/Data Rate2.5Gbps
Decode Display

Control Field (yellow)

ECC/CRC (Green)

Pixel Fields (Red,Green,Blue,Yellow)

Data Symbol (cyan)

Raw Fields (Cyan)
Error Handling

ECC

CRC

SOT Sync

Bus search options
CharacteristicDescription
Search On (CSI/DSI)

SoT – It searches SoT of each transmission in HS mode

EoT – It searches EoT of each transmission in HS mode.

Data – Data search (HS/LP)

Scrambling – Search for scrambling mode command

Compression – Search for Compression mode command.

**Packets – Searches for Short and long packets

Escape – Search for Escape entry mode

STOP – Search for Escape mode exit

Errors – Search for CRC and ECC errors.

**Can select from the list of standard packet names

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Bus search options

Result & other features
Characteristic Description

Table view

* Depends on the Model
View more than 10000* points
Save Save Result table as CSV
Sessions Save sessions of your protocol setup

Simultaneous Buses

* Depends on the Model
Load multiple Buses simultaneously*
Upcoming Future additionTiming Measurements for Protocols
Search TableDisplays the Search hits along with Delta time difference between hits

SDLC Characteristics

Bus setup options
Characteristic Description
SDLC Source(s)

Analog channels

Digital channels

Active Math channels

Active Reference channels

Thresholds Pre-channel thresholds
Recommended Probing Differential
Modulo

8 [8-bit Control Word]

128 [16-bit Control Word]

EncodingDiscrete Transmission [NRZ] Invert On Zero [Inverted NRZi]
Formats Available

Hex

Binary

Mixed Hex

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9

Display modes
Characteristic Description
Bus Bus Only
Result TableDecoded packet data in a tabular view

Bus decode
Characteristic Description
Maximum Clock/Data Rate1 Gbits/sec
Decode Display

Start (green vertical line)

Address (yellow field)

Frame Type (yellow field)

Code (yellow field)

Ns(yellow field) [Sequence number sent]

Nr(yellow field) [Sequence number received]

Poll/Final (yellow field)

Data(cyan field)

FCS(purple field)

Abort (red vertical line)

Error handlingFCS [ Frame Check Sequence Errors]

Bus search options
Characteristic Description
Search On

Start [Searches for Start event]

Data [Searches for Payload Data]

Abort [Searches for Abort]

Address

Broadcast [Broadcast Packets]

No Station [Packets not pertaining to secondary]

Station [Valid Station Address]

Unnumbered

Commands [Searches for Primary Commands]

Responses [Searches for Secondary Responses]

Both Information [Searches for information frames]

Supervisory [Searches for different receiver status]

Receive Frame Ready

Receive Frame Not Ready

Reject frame

Errors

FCS [Searches for Frame Check Sequence errorrs]

Out of Numeric Order [Searches for this frame]

Stop

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Bus search options

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
The Protocol Decode Results Table provides a time-stamped, tabular view of all captured packets on the SDLC bus.

MSO3 4 5 6 SerialBusAnalysisApps EN US 61W 61101 9
Searching on a station address on the SDLC bus.

Ordering information

Protocol Bundles

Specially designed SW bundles with 1 year renewable & perpetual to suit your Design and validation needs

Validate your Protocols with our industry standard Serial analysis software available for over 30 technologies.

Master bundle for Serial Analysis teams. Our standards expertise and Integrated Protocol Decoders help you shorten your design cycle, gain greater technical insight and improve team productivity to bring new products and services to market much faster.

Serial DeodeDescription4 Series MSO5 Series MSO6 Series MSO
4-RL-1Record length enhancement to 1 million sample points
5-RL-125MRecord length enhancement to 125 million sample points
6-RL-2Record length enhancement to 2 million sample points
SRAUDIOAudio Serial Triggering and Analysis (I2S, LI, RJ, TDM). Enables triggering on packet-level information on serial audio buses
SRAUTOAutomotive Serial Triggering and Analysis (CAN, CAN FD, LIN, FlexRay). Enables triggering on packet-level information on CAN/CAN FD/LIN/FelxRay
SRNETEthernet Serial Triggering and Analysis (10BASE-T, 100BASE-T). Enables decoding and analysis on Ethernet buses.
SRI3CI3C Serial Decoding and Analysis. Enables decoding and searching on packet-level information on MPI I3C
SRNRZNRZ Serial Decoding and Analysis. Supports NRZ with normal and inverted polarity with Bit order (MSB or LSB first)
SRPMPower Management Serial Triggering and Analysis. Enables triggering on packet-level information on SPMI buses
SRUSB2USB 2.0 Serial Triggering and Analysis (LS, FS, HS). Enables triggering on packet-level information on USB 2.0 buses
SRMDIOMDIO Protocol Decoder and Search. Extensive search options.
SRSVIDSVID Protocol Decider and Search. Supports bersion rev.1.92. Extensive search options
SR8B10B8B10B Serial Decoding and Analysis. Finds and displays parity eroor if found in 4-bit or 6-bit for the 10-bit symbol in 8b10b
1 Year Licence4-PRO-MILGOV-1Y5-PRO-MILGOV-1Y6-PRO-MILGOV-1Y
Perpetual4-PRO-MILGOV-PER5-PRO-MILGOV-PER6-PRO-MILGOV-PER

Master Bundle for Military , Aerospace Designers. Our Software design tools help you shorten your design cycle, gain greater technical insight and improve team productivity to bring new products and services to market much faster.

Serial DeodeDescription4 Series MSO5 Series MSO6 Series MSO
4-RL-1Record length enhancement to 1 million sample points
5-Rl-125MRecord length enhancement to 1 million sample points
6-RL-2Record length enhancement to 2 million sample points
SRAEROAerospace Serial Triggering and Analysis (MIL-STD-1553, ARINC429). Enables triggering on packet-level information
SRSPACEWIRESpaceWire serial analysis. Enables decoding and analysis on SpaceWire buses.
MTM
SRNRZNRZ Serial Decoding and Analysis. Supports NRZ with normal and inverted polarity with Bit order (MSB or LSB first)
DJAJitter Analysis Package including TIE, Eye diagram, Histogram and other advanced analysis measurements.
1 Year Licence

Perpetual

4-PRO-MILGOV-1Y5-PRO-MILGOV-1Y6-PRO-MILGOV-1Y
4-PRO-MILGOV-PER5-PRO-MILGOV-PER6-PRO-MILGOV-PER

To add to an instrument at purchase
Serial bus type 3 Series MDO Option 4 Series MSO Option 5 Series MSO Option 6 Series MSO Option Description

MIL-STD-1553, ARINC 429

3-SRAERO

4-SRAERO

5-SRAERO

6-SRAERO

Aerospace Serial Triggering and Analysis (MIL-STD-1553, ARINC 429). Enables triggering on packet-level information on MIL-STD-1553 and ARINC 429 buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

I2S, LJ, RJ, TDM

3-SRAUDIO

4-SRAUDIO

5-SRAUDIO

6-SRAUDIO

Audio Serial Triggering and Analysis (I2S, LJ, RJ, TDM). Enables triggering on packet-level information on serial audio buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

8b10b

N/A

N/A

5-SR8B10B

5-SR8B10B

8B10B Serial Decoding and Analysis. Enables decoding and searching the packet-level information on buses with analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information. Finds and displays parity error if found in 4-bit or 6-bit for the 10-bit symbol in 8b10b.

NRZ

N/A

4-SRNRZ

5-SRNRZ

6-SRNRZ

NRZ Serial Decoding and Analysis. Enables decoding and searching the packet-level information on buses with analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information. Variants like NRZ-I, NRZ-M, NRZ-S, and NRZ-C are not supported currently. Supports only NRZ with normal and inverted polarity with Bit Order (MSB or LSB First).

CAN, CAN FD, LIN, FlexRay

3-SRAUTO

4-SRAUTO

5-SRAUTO

6-SRAUTO

Automotive Serial Triggering and Analysis (CAN, CAN FD, LIN, FlexRay). Enables triggering on packet-level information on CAN/CAN FD/LIN/FlexRay buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

Automotive 100BASE-T1

N/A

N/A

5-SRAUTOEN1

6-SRAUTOEN1

100BASE-T1 Automotive Ethernet serial analysis.

SENT

N/A

4-SRAUTOSEN

5-SRAUTOSEN

6-SRAUTOSEN

Automotive Sensor Serial Triggering and Analysis (SENT). Enables triggering on packet-level information on SENT buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

RS-232/422/485, UART

3-SRCOMP

4-SRCOMP

5-SRCOMP

6-SRCOMP

Computer Serial Triggering and Analysis (RS-232, RS-422, RS-485, UART). Enables triggering on packet-level information on RS-232/422/485 and UART buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

I 2C, SPI

3-SREMBD

4-SREMBD

5-SREMBD

6-SREMBD

Embedded Serial Triggering and Analysis (I2C, SPI). Enables triggering on packet-level information on I2C and SPI buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

Ethernet

N/A

4-SRENET

5-SRENET

6-SRENET

Ethernet Serial Triggering and Analysis (10BASE-T, 100BASE-T). Enables triggering on packet-level information on Ethernet buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

I3C

N/A

4-SRI3C

5-SRI3C

6-SRI3C

I3C Serial Decoding and Analysis. Enables decoding and searching on packet-level information on MIPI I3C buses with analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

SPMI

N/A

4-SRPM

5-SRPM

6-SRPM

Power Management Serial Triggering and Analysis (SPMI). Enables triggering on packet-level information on SPMI buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

Spacewire

N/A

4-SRSPACEWIRE

5-SRSPACEWIRE

6-SRSPACEWIRE

Spacewire serial analysis. Enables decoding and analysis on Spacewire buses.

USB 2.0

3-SRUSB2

4-SRUSB2

5-SRUSB2

6-SRUSB2

USB 2.0 Serial Triggering and Analysis (LS, FS, HS). Enables triggering on packet-level information on USB 2.0 buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

Serial options bundle 3-BND

N/A

N/A

N/A

Adds all serial analysis options and the power analysis option available for an instrument.
PSI5

N/A

4-SRPSI5 5-SRPSI5 6-SRPSI5

PSI5 Serial Decoding(v1.3 and 2.1) and analysis. Enables decoding and Search Packet level information with analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

MDIO

N/A

LIC4-SRMDIO LIC5-SRMDIO LIC6-SRMDIO License; MDIO Protocol Decoder and Search, No Hardware Trigger; Node locked
SVID

N/A

LIC4-SRSVID LIC5-SRSVID LIC6-SRSVID License; SVID Protocol Decoder and Search, No Hardware Trigger; Node locked
e-USB2

N/A

LIC4-SREUSB2 LIC5-SREUSB2 LIC6-SREUSB2

License; eUSB2 Protocol Decoder and Search; Node locked

DPHYN/AN/A5- SRDPY6- SRDPY

DPHY CSI/DSI (DSI2.0 /CSI2.0 protocols decoder. Supports HS data transmission burst &, escape mode functionality.

Data transmission can be with 8-bit raw data or using 8b9b encoded symbol

MANCHESTERN/A4-SRMANCH5-SRMANCH6-SRMANCHSupports Generic Manchester decode Decode of packets as per packet structure defined. Decode of Errors like Sync, Parity, Manchester
SDLC4-SRSDLC5-SRSDLC6-SRSDLCSDLC decoder and Search. Extensive search options on captured waveforms like unnumbered , Supervisory ,address etc

To upgrade an already purchased instrument
Serial bus193 Series MDO Node-Locked License204 Series MSO Node-Locked/Floating License 5 Series MSO Node-Locked/Floating License 6 Series MSO Node-Locked/Floating License
MIL-STD-1553, ARINC 429 SUP3 SRAERO SUP4-SRAERO

SUP4-SRAERO-FL

SUP5-SRAERO

SUP5-SRAERO-FL

SUP6-SRAERO

SUP6-SRAERO-FL

I2S, LJ, RJ, TDM SUP3 SRAUDIO SUP4-SRAUDIO

SUP4-SRAUDIO-FL

SUP5-SRAUDIO

SUP5-SRAUDIO-FL

SUP6-SRAUDIO

SUP6-SRAUDIO-FL

CAN, CAN FD, LIN, FlexRay SUP3 SRAUTO SUP4-SRAUTO

SUP4-SRAUTO-FL

SUP5-SRAUTO

SUP5-SRAUTO-FL

SUP6-SRAUTO

SUP6-SRAUTO-FL

8B10B

N/A

N/A

SUP5-SR8B10B

SUP5-SR8B10B-FL

SUP6-SR8B10B

SUP6-SR8B10B-FL

NRZ

N/A

SUP4-SRNRZ

SUP4-SRNRZ-FL

SUP5-SRNRZ

SUP5-SRNRZ-FL

SUP6-SRNRZ

SUP6-SRNRZ-FL

100BASE-T1 Automotive Ethernet

N/A

N/A

SUP5-SRAUTOEN1

SUP5-SRAUTOEN1-FL

SUP6-SRAUTOEN1

SUP6-SRAUTOEN1-FL

SENT

N/A

SUP4-SRAUTOSEN

SUP4-SRAUTOSEN-FL

SUP5-SRAUTOSEN

SUP5-SRAUTOSEN-FL

SUP6-SRAUTOSEN

SUP6-SRAUTOSEN-FL

RS-232/422/485, UART SUP3 SRCOMP SUP4-SRCOMP

SUP4-SRCOMP-FL

SUP5-SRCOMP

SUP5-SRCOMP-FL

SUP6-SRCOMP

SUP6-SRCOMP-FL

I2C, SPI SUP3 SREMBD SUP4-SREMBD

SUP4-SREMBD-FL

SUP5-SREMBD

SUP5-SREMBD-FL

SUP6-SREMBD

SUP6-SREMBD-FL

Ethernet

N/A

SUP4-SRENET

SUP4-SRENET-FL

SUP5-SRENET

SUP5-SRENET-FL

SUP6-SRENET

SUP6-SRENET-FL

I3C N/A SUP4-SRI3C

SUP4-SRI3C-FL

SUP5-SRI3C

SUP5-SRI3C-FL

SUP6-SRI3C

SUP6-SRI3C-FL

SPMI

N/A

SUP4-SRPM

SUP4-SRPM-FL

SUP5-SRPM

SUP5-SRPM-FL

SUP6-SRPM

SUP6-SRPM-FL

Spacewire

N/A

SUP4-SRSPACEWIRE

SUP4-SRSPACEWIRE

SUP5-SRSPACEWIRE

SUP5-SRSPACEWIRE-FL

SUP6-SRSPACEWIRE

SUP6-SRSPACEWIRE-FL

USB 2.0 SUP3 SRUSB2 SUP4-SRUSB2

SUP4-SRUSB2-FL

SUP5-SRUSB2

SUP5-SRUSB2-FL

SUP6-SRUSB2

SUP6-SRUSB2-FL

Serial analysis bundle21SUP3 BND

N/A

N/A

N/A

PSI5

N/A

SUP4-SRPSI5

SUP4-SRPSI5-FL

SUP5-SRPSI5

SUP5-SRPSI5-FL

SUP6-SRPSI5

SUP6-SRPSI5-FL

MDIO

N/A

SUP4-SRMDIO

SUP4-SRMDIO-FL

SUP5-SRMDIO

SUP5-SRMDIO-FL

SUP6-SRMDIO

SUP6-SRMDIO-FL

SVID

N/A

SUP4-SRSVID

SUP4-SRSVID-FL

SUP5-SRSVID

SUP5-SRSVID-FL

SUP6-SRSVID

SUP6-SRSVID-FL

e-USB2

N/A

SUP4-SREUSB2

SUP4-SREUSB2-FL

SUP5-SREUSB2

SUP5-SREUSB2-FL

SUP6-SREUSB2

SUP6-SREUSB2-FL

DPHYN/AN/A

SUP5-SRDPHY

SUP5-SRDPHY -FL

SUP6-SRDPHY

SUP6-SRDPHY-FL

MANCHESTERN/A

SUP4-SRMANCH

SUP4-SRMANCH-FL

SUP5-SRMANCH

SUP5-SRMANCH-FL

SUP6- SRMANCH SUP6- SRMANCH -FL
SDLCN/A

SUP4-SRSDLC

SUP4- SRSDLC -FL

SUP5- SRSDLC

SUP5- SRSDLC -FL

SUP6- SRSDLC

SUP6- SRSDLC -FL

19 Software is supplied with the instrument firmware. Always download and install the latest version of the firmware. Option documentation is part of the application Help.

20 3 Series MDO option license names do not have a dash in the option number.

21 All serial bus and power analysis options that are available for an instrument.

Recommended probes
Please refer to www.tek.com/probes for further information on the recommended models of probes and any necessary probe adapters.

Partner Products Ordering information

Brief Description of Partner
To add to an instrument at purchase (Supports Windows Option)
Serial bus type Minimum Bandwidth Recommended Probes 5 Series MSO Option 6 Series/6B Series MSO OptionDescription
PGY-eMMC (Windows Option Only)2 GHzStandard probes of MSO5/6 seriesPGY-eMMCPGY-eMMC eMMC and SD (UHS-I) electrical measurements and Protocol decoding. software conforms to eMMC version 4.41,4.51,5.0, 5.1 specification. Supports Boot, SDR, DDR, HS200 and HS400 mode for electrical measurement and protocol Decode
PGY-SDIO(Windows Option Only)2 GHzStandard probes of MSO5/6 seriesPGY-I2C PGY-I2CI2C Electrical Validation and Protocol decode SW
PGY-QSPI(Windows Option Only)500 MHzStandard probes of MSO5/6 seriesPGY-SPIPGY-SPIElectrical measurements compliance testing and protocol decoding as specified in QSPI specification. Supports Single and Dual Transfer rate (STR/DTR), electrical measurements and compliance testing for Ext SPI, Dual SPI and Quad SPI. Supports Triggering on command index and on S# falling edge. Supports Analog and Digital Channels of Tektronix MSO Series
Reference Selling of List of protocols supported on MSO series (please note: Windows only)
Serial bus type Minimum Bandwidth Recommended Probes Ordering5 Series MSO Option 6 Series/6B Series MSO OptionDescription
RFFE500 MHz Standard probes of MSO5/6 series Reference Selling. Contact: http://[email protected]PGY-RFFE PGY-RFFE

RFFE Protocol Trigger & Decode Analysis Software.

PGY-RFFE utilizes the hardware based real-time RFFE protocol aware trigger, protocol analysis of long acquisition record length up to 125MB to provide superior RFFE Protocol Analysis result at press of button.

I2S500 MHx and above

standard probes

Reference Selling. Contact: [email protected]PGY-I2SPGY-I2SI2S Electrical, Audio and Protocol Testing SW
I2C500 MHz and above

standard probes

Reference Selling. Contact: http://[email protected]PGY-I2C PGY-I2C I2C Electrical Validation and Protocol decode SW
SPI 500 MHz and above

standard probes

Reference Selling. Contact: http://[email protected]PGY-SPIPGY-SPISPI Electrical Validation and Protocol decode SW
I3C 500 MHz and above

standard probes

Reference Selling. Contact: http://[email protected]PGY-I3CPGY-I3CI3C Electrical Validation, Protocol trigger and Decode software
JTAG500 MHz and above

standard probes

Reference Selling. Contact: http://[email protected]PGY-JTAG PGY-JTAGJTAG Protocol decode Software
ONFI

4 GHz and above

Contact ProdigyReference Selling. Contact: http://[email protected]PGY-ONFIPGY-ONFIONFI Electrical Timing Analysis Sw
SPMI500 MHz and abovestandard probes Reference Selling. Contact: http://[email protected]PGY-SPMIPGY-SPMISPMI Protocol Decode Software
MPHY16 GHz and above Contact ProdigyReference Selling. Contact: http://[email protected]

PGY-UPRO

PGY-LLI

PGY-UFS(needs PGY-UPRO)

PGY-UPRO

PGY-LLI

PGY-UFS(needs PGY-UPRO)

MIPI MPHY -UniPro/LLI/UFS Protocol Decode Sw
USB 2.0

2 GHz

Contact ProdigyReference Selling. Contact: http://[email protected]PGY-USBPGY-USBUSB 2.0 Protocol Decode Sw
USB-PD 500 MHz and above Standard probes Reference Selling. Contact: http://[email protected]PGY-PD PGY-PD USB PD (CC) Protocol Analysis Sw
UART500 MHz and above Standard probes Reference Selling. Contact: http://[email protected]PGY-UART PGY-UART UART Electrical Validation and Protocol Decode Software
KX/KR

12 GHz and above

Contact Prodigy Reference Selling. Contact: http://[email protected]PGY-NEGO PGY-NEGOKX/KR DME and Line Training Analysis Sw
100Base-T1 2 GHz and above

Standard probes

Reference Selling. Contact: http://[email protected]PGY-100Base T1 PGY-100Base T1 100 Base-T1 Protocol Decode Sw
SVID 500 MHz and above

Standard probes

Reference Selling. Contact: http://[email protected]

PGY-SVID

PGY-SVIDSVID Protocol Decode Sw
USB3 Gen 1

23 GHz and above

Contact Prodigy Reference Selling. Contact: http://[email protected]PGY-USB3 Gen1 PGY-USB3 Gen1 USB3 Gen 1 5 Gbps Protocol Decode Sw
USB3 Gen 2

23 GHz and above

Contact Prodigy Reference Selling. Contact: http://[email protected]PGY-USB3 Gen1 PGY-USB3 Gen1USB3 Gen 2 Protocol Decode Sw
8B10B

4 GHz and above

Contact Prodigy Reference Selling. Contact: http://[email protected]PGY-8B10B PGY-8B10B8B10B Protocol Decode Sw
1000T1-LT

4 GHz and above

Contact Prodigy Reference Selling. Contact: http://[email protected]PGY-1000T1-LT PGY-1000T1-LT 1000BaseT1 Line Training Decode Software
Terms and Conditions
Lead time of 2-3 Weeks ARO.