Tektronix Logic Analyzer Probes
Verification and debug of today's high speed, low voltage digital signals requires probing solutions that can accurately acquire from a wide variety of electronic designs and protect signal fidelity. Tektronix logic analyzer probes contain a variety of connectivity options that are engineered to ensure that signal acquisition is a true reflection of your design's performance.
- <0.7 pF total capacitive loading minimizes intrusion on circuits
- 20 kΩ input resistance
- 6.5 Vp-p dynamic range supports a broad range of logic families
- General-purpose probing allows flexible attachment to industry-standard connections
- Connectorless probing system eliminates need for onboard connectors
- Hardware debug and verification
- Processor/Bus debug and verification
- Embedded software integration, debug, and verification
Leading probe solutions for real-time digital systems analysis
P6800 and P6900 series probes
With the industry's lowest capacitance, the P6800 and P6900 Series logic analyzer probes for the TLA7000 Series protect the integrity of your signal - critical for connecting to fast buses where low intrusion is key to the proper operation of your design. Select from single-ended and differential probes and a variety of attachment mechanisms.
For applications where circuit board space is at a premium, the high-density P6900 Series with D-Max® Probing Technology offers the industry's smallest available footprint. For debugging the signal integrity glitches common on fast buses, the P6900 Series works with the TLA7Bxx and TLA7ACx modules and their iLink™ Tool Set capability to provide iCapture™ simultaneous digital-analog acquisition. This allows you to clearly see the time-correlated digital and analog behavior of your design, without the extra capacitance and setup time of double probing.
For differential signaling applications where signal integrity is critical, the high-fidelity P6980 and P6982 are perfect for those applications where noise performance is critical. In addition, the P6980 and P6982 can support the small voltage swings that differential signaling often requires. For board designs that do not include high-density probe footprints, the P6960 with its companion flying leadset or the P6910 provide the flexibility required to meet many different debug needs.
All specifications apply to all models unless noted otherwise.
Compatible with TLA7AAx, TLA7ACx, TLA7NAx, TLA7BBx, TLA7BCx, and TLA6200
|Number of channels||34||34||34||34||34||17|
|Recommended use||Good signal density and quick reliable attachment. Not recommended for new designs. Use P6960 for new designs.||General-purpose applications||Best signal density and quick reliable attachment. Flying leads for general-purpose probing is optional.||Data rates in excess of 750 MHz (TLA7Bxx) or 450 MHz (TLA7ACx) with the best signal density.||Full differential probing with the best signal density.||Full differential with the best signal density for data rates in excess of 750 MHz (TLA7Bxx) or 450 MHz (TLA7ACx).|
|Attachment to target system||Compression Elastomer||Fits 0.100 in. square pin configurations; flying-leads, solder-in||D-Max® probing technology compression cLGA||D-Max® probing technology compression cLGA||D-Max® probing technology compression cLGA||D-Max® probing technology compression cLGA|
- Input resistance
20 kΩ to Ground, typical
- Input capacitance
- <0.7 pF
- 1.3 pF
- All others
- 0.5 pF
- Minimum digital swing
P6910 P6860, P6960, P6962, P6964 P6980, P6982 150 mV single-ended 300 mV single-ended 150 mV differential each side
P6910 P6860, P6960, P6962, P6964 P6980, P6982 100 mV single-ended 200 mV single-ended 100 mV differential each side
- Analog bandwidth 1
- With TLA7Bxx module
- 3 GHz through iCapture™ to analog out BNCs
- With TLA7ACx module
- 2 GHz through iCapture™ to analog out BNCs
1 Analog bandwidth of the P6960 probe is less with the flying lead set attached.
- Operating range
- -2 V to +5 V
- Maximum nondestructive voltage
- ±15 V
- Cable length
- 1.8 m (6 ft.)