연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

HDMI Compliance Test Software

TekExpress HDMI Source Compliance Test Application for HDMI 2.1, HDMI 2.0, HDMI 1.4

TekExpress HDMI Source Compliance Test Application for HDMI 2.1, HDMI 2.0, HDMI 1.4

HDMI 2.1: Engineers designing and validating the HDMI physical layer of their devices face constant pressure to improve efficiency. Designers need to perform a wide range of compliance tests quickly and reliably, right on their bench. The HDMI 2.1 is known for Fixed Rate Link (FRL) supports up to 4 k at 120 Hz or 8 k at 60 Hz for both compressed and uncompressed video content. The FRL supports only predefined discrete data rates - 3 Gbps, 6 Gbps, 8 Gbps, 10 Gbps, and 12 Gbps on each of its 4 lanes, which means the FRL supports a post encoded link bandwidth of up to 48 Gbps.

TekExpress_HDMI_61W616961

HDMI 2.0: HDMI 2.0 supports features like 2160p (also known as Ultra HD/4K 2K 60/50 Hz), operating at 5.94 Gbps.

Option HDM compliance software automates a comprehensive range of tests according to CTS 2.0.

TekExpress_HDMI_61W616961

HDMI 1.4: TDSHT3 automate a comprehensive range of tests according to CTS 1.4b - enabling unprecedented efficiency with reliable results. HDMI 1.4b compliance testing is a PREREQUISITE for HDMI 2.0 testing.

Key features

HDMI 2.1 FRL (Opt. HD21/Opt. DJA/Opt. SDLA64)

  • Conformance to HDMI 2.1 Standards and Compliance Test Specification 2.1 (CTS)
  • Simple and easy setup to perform measurements
  • The TekExpress based software solution allows to completely automate the execution of all source measurements
  • Fully integrated with EDID/SCDC emulators
  • Statistically based Pass/Fail results, quick results with Pass/Fail notification, and limit margins.

HDMI 2.0 HDM (Opt. HDM)

  • Conformance to HDMI 2.0 Compliance Test Specification (CTS)
  • Accurate source tests using precise measurement techniques
  • Quick results with automatic mask fit, measurements and Pass/Fail notification, and in-depth results with statistical analysis and mask margins
  • Quick testing with one-button selection of multiple tests and CSV-format test summary and reports
  • Comprehensive HDMI 2.0 solution including test fixtures, DPO/DSA/MSO70000

HDMI 1.4 TDSHT3 (Opt. HT3)

  • Conformance to HDMI 1.4a/b Standards and Compliance Test Specification 1.4a/b (CTS)
  • Accurate source tests using precise measurement techniques
  • Quick results with automatic mask fit, measurements and Pass/Fail notification, and in-depth results with statistical analysis and mask margins
  • Quick testing with one-button selection of multiple tests and CSV-format test summary and reports
  • Comprehensive HDMI 1.4a/b solution including test fixtures, DPO/DSA/MSO70000

Fully automated HDMI 2.1 FRL compliance testing

The TekExpress FRL compliance solution provides you the tools to easily run High Definition Multimedia Interface (HDMI) tests under the HDMI 2.1 compliance test specification. It provides a complete and reliable solution for quick testing.

Quick Pass/Fail tests substantiated with results make the TekExpress FRL application the preferred solution for HDMI 2.1 physical layer validation. In-depth analysis is possible with the statistical information about the performed tests.

TekExpress_HDMI_61W616961
HDMI 2.1 Source Measurements

Applications

  • Design and validation of HDMI 2.0/1.4a/b physical layer

Reliable and dependable results

Option HDM embeds HDMI forum CTS 2.0 compliance test procedures, ensuring reliable results. TDSHT3 embeds the HDMI CTS 1.4a/b compliance test procedures, including the software clock recovery (SoftCRU), ensuring dependable results. Accurate eye rendering and precise violation testing deliver credible results. Authentic measurement techniques and automation eliminate errors to provide repeatable results.

TekExpress_HDMI_61W616961
HDMI 2.0 Source Measurements
TekExpress_HDMI_61W616961
HDMI 1.4 Source Measurements

Faster validation cycles

The unparalleled automation offered on the HDM, TDSHT3 enables faster validation. Demonstrate efficiency by using the "Select All" feature to perform multiple tests. Quickly generate CSV-format summaries or detailed reports at a press of a button.

Test descriptions

Source Electrical Test List

HDMI 2.1 FRL

Test IDTest pointMeasurement
HFR1-1TP1DC Common Mode
HFR1-2Vse_max, Vse_min
HFR1-3TRISE, TFALL
HFR1-4Inter-Pair Skew
HFR1-5FRL Rate
HFR1-6TP1/TP2Data Jitter (Rj)
HFR1-7TP2_EQData Eye Diagram
HFR1-8TP1AC Common Mode Noise
HFR1-9FFE

HDMI 2.0 HDM

Test IDTest pointTest Mode
HF1-1 VL and VswingTP1Single-ended
HF1-2 Rise and Fall timesTP1Differential
HF1-3 Inter pair skew
HF1-4 Intra-pair skewTP1Single-ended
HF1-6 Clock Duty cycleTP1Differential
HF1-7 Clock JitterTP2_EQDifferential
HF1-8 Data Eye DiagramTP2_EQSingle-ended
HF1-5 Differential VoltageTP1Differential

HDMI 1.4 TDSHT3

Test IDTest pointTest Mode
7-2 TMDS VLTP1Single-ended
7-4 TMDS Rise and Fall TimesDifferential
7-6 TMDS Inter pair skew
7-7 TMDS Intra-pair skewSingle-ended
7-8 TMDS Clock Duty cycleDifferential
7-9 TMDS Clock Jitter
7-10 TMDS Data Eye diagram
7-3 VoffSingle-ended

Eye diagram analysis

HDMI 2.1 Eye diagram capability: Displays the eye diagram of the High-Speed signal with option DJA enabled on the oscilloscope for test HFR1-7 Data lane Eye Diagram. This test evaluates the waveform parameters over a significant interval of time to verify that with proper clock recovery and equalization, there is no signal incursion into regions defined by a mask to result in correct demodulation of data. The equalization (CTLE and DFE is applied for data rate equal to 12 Gbps; while CTLE only is applied, for any other data rate) on the resulting summed waveform for a wider eye-opening.

TekExpress_HDMI_61W616961
Eye diagram analysis for HDMI 2.1, 12Gbps signal

HDMI 2.0 Eye diagram capability: Displays the eye diagram of the High-Speed 6Gbps signal with option HDM and DJA enabled on the oscilloscope for test HF1-8 Data lane Eye Diagram. Software automatically applies WCM and CTLE to render HDMI 2.0 HF1-8 eye diagram measurement.

TekExpress_HDMI_61W616961
Eye diagram analysis for HDMI 2.0, 6Gbps signal: Single Ended Input eye rendered at Tek lab with auto-mask adjust feature

Source Schematic with TriMode Differential Probes

TekExpress_HDMI_61W616961
DPO70K SX/DX Oscilloscope with TriMode Differential Probes

Ordering information

Required software

Product/FeatureDescription
Opt. HD21HDMI 2.1 Advanced Analysis and Compliance Software for Tx tests
Opt. DJADPOJET-Advanced Jitter Analysis
Opt. SDLA64Serial Data Link Analysis
Opt. HDMHDMI 2.0 Advanced Analysis and Compliance Software for Source testing.
  • Prerequisite for HDMI 2.0 is HDMI 1.4b testing; hence TDSHT3 is required.
  • Prerequisite is Option DJA, Opt 10XL (required for 100M RL), and SR-CUST.
Opt. HT3HDMI 1.4b Compliance Test Software
DPOFL-HDMAdvanced Analysis and Compliance Software for HDMI 2.0 Tx floating license
DPOFT-HDMAdvanced Analysis and Compliance Software for HDMI 2.0 Tx floating license (trial version)

Software upgrades

Product/FeatureDescription
DPO/DSA/MSO70000 SX/DXOrder DPO-UP – Opt. HD21
DPO/DSA/MSO70000 SX/DXOrder DPO-UP – Opt. HDM
DPO/DSA/MSO70000 SX/DXOrder DPO-UP – Opt. HT3

Recommended equipment and accessories

HDMI 2.1/2.0/1.4 source single oscilloscope

AccessoryDescription
Description
  • DPO/MSO70000 series real-time oscilloscopes: DPO72304SX1 Digital Phosphor Oscilloscope with bandwidth ≥ to 23 GHz; 4 Ch, 23 GHz, 50 GS/s or 2 Ch, 23 GHz, 100 GS/s (Needed for HDMI 2.1)
  • DPO/MSO70000 SX/DX series real-time oscilloscopes with min 16M Record Length Opt. 2XL on and DX series oscilloscopes (For eye diagram and jitter tests) (Needed for HDMI 2.0)
  • 100M Record Length Opt 10XL (Needed for HDMI 2.0)
  • Option DJA and SR-CUST (Also required for HDM Software)
  • HDMI 1.4b Compliance Test Software
Probes
  • P7625/P7633/P7720 Tri-mode probe with P76CA-292C (4 Nos.)
Differential probes
  • Minimum 3 probes are recommended for HDMI 2.0 testing and are also used for single-ended testing.
  • Four P76xx/P7720 Tri-mode probe with P76CA-292C probes are recommended for faster physical layer testing of all 4 HDMI 1.4 and HDMI 2.0 channels.

Recommended test fixture cables and tools

DescriptionImage
Description: Cable assembly: Phase matched pair, SMA plug to SMA plug, 1 meter

Part number: 174-5771-xx

Quantity: 2

TekExpress_HDMI_61W616961
Description: SMA female to female adapter, 0.500 L

Part number: 015-1012-xx

Quantity: 8

TekExpress_HDMI_61W616961

HDMI fixtures

Fixture Type Nomenclature
HDA 2.1-TPA-PHDMI 2.1 Type A Plug Adapter (1 Qty)
HD-EDID-TEMSSHDMI EDID Controller Kit Wilder (1 Qty)
HDMI 2.0 Type-ATF-HDMI-TPA-P plug fixture
TF-HDMI-TPA-T

HD-EDID-TEMSS or AJSC-1

(HDMI EDID Controller Kit /Allion SCDC/EDID Controller)

HDMI 1.4b Type-ATF-HDMI-TPA-P plug fixture
TF-HDMI-TPA-CE EDID board with EDID EEPROM

Model number: HDMIA2.1-TPA-P

Part number: 640-0860-000

TekExpress_HDMI_61W616961

Model number: HDMIA2-TPA-12P

Part number: 640-0770-200

TekExpress_HDMI_61W616961

Model number: HDMI-TPA-T

Part number: 640-0408-000

TekExpress_HDMI_61W616961

Supported Tektronix instruments

Real-time oscilloscopes
HDMI 2.1 Tx compliance software
  • DPO/MSO70000 series real-time oscilloscopes: DPO72304SX1 Digital Phosphor Oscilloscope with bandwidth ≥ to 23 GHz; 4 Ch, 23 GHz, 50 GS/s or 2 Ch, 23 GHz, 100 GS/s support HDMI 2.1 FRL compliance software.
  • DPS 70000 SX (Two Stack) series: DPO75002SX2, DPO75902SX2, and DPO77002SX2.
HDMI 2.0, HDMI 1.4 Tx compliance software

The recommended oscilloscope bandwidth for HDMI 2.0 is ≥ to 16 GHz. Although a 12.5 GHz bandwidth oscilloscope is supported, it will have as much as a 10% variation in test results.

  • DPO/MSO70000 Series real-time oscilloscopes support HDMI 2.0 HDM, HDMI 1.4 TDSHT3 compliance softwares.
  • DPS 70000 SX (Two Stack) series: DPO75002SX2, DPO75902SX2, and DPO77002SX2.