PSPL5510V 60 GHz Attenuator

PSPL5510V Datasheet

The PSPL5510V Attenuators address a need that has been totally ignored by other microwave component manufacturers who specify their products in the frequency domain, but ignore the time domain responses. For time domain measurements, it is important to also know the transient response of attenuators used in a test set-up. These 1.85 mm attenuators have 5 ps rise times and are recommended for measuring pulses with rise times of 13 ps or slower. For frequency domain measurements, the useful frequency range is DC to 60 GHz. The 1.85 mm connector is compatible with 2.4 mm connectors.

Key performance specifications

1.85 mm connectors
DC to 60 GHz
5 ps Rise time

Typical performance

Specifications

Parameter ¹	Value
Values available	3, 6, 10, and 20 dB
Frequency range	DC to 60 GHz
Connectors	1.85 mm jack (f) & plug (m)
Rise time (10% to 90%)	5 ps, when tested with 10 ps rise time pulse
Impedance - DC	50 Ω,
Delay	90 ps (see typical performance plots)
DC Attenuation accuracy	±0.5 dB maximum limits guaranteed
Return loss – DC VSWR – DC	> 30 dB typical, 23 dB minimum > 1.06 typical, 1.15 maximum
Attenuation Flatness (see Typical performance plots)
Return Loss – AC (see Typical performance plots)	> 20 dB, f > 15 dB, f > 12 dB, f
Max. Power Input	2 W average at 25 °C, derated linearly to 1 W at 85 °C, 50 W peak for
Temperature Range	-55 to +85 °C operating, –55 to +125 °C storage, 0.001 dB/dB/ °C temp. coefficient.
Dimensions	28.8 mm length, 8 mm diameter
Weight	8 gm
Material	Stainless steel
Serial Number	Yes
Warranty	One Year

¹ All parameters listed are typical unless maximum or minimum guaranteed limits are provided.

Mechanical dimensions: 1.85 mm connectors, jack-plug only; all dimensions in inches

PSPL5510V 60 GHz Attenuator

PSPL5510V Datasheet

Key performance specifications

Typical performance

Specifications

Ordering information

Models

Options