AWG5200 Series Datasheet

Arbitrary Waveform Generators

기준 가격 범위

-

추가 정보:

상세보기:

The AWG5200 Series arbitrary waveform generator (AWG) leads the way in signal generation by enabling bleeding-edge innovation for engineers and researchers. The AWG5200 Series of AWGs delivers unparalleled signal fidelity coupled with class-leading sample rate and memory depth, giving you the industry's best signal stimulus solution for complex RF baseband signal generation and precision experimental applications. With up to 5 GS/s sample rate (10 GS/s with interpolation) and 16-bit vertical resolution, the AWG5200 Series offers easy generation of complex signals as well as accurate playback of existing captured signals.

Key performance specifications
  • Sample rates up to 10 GS/s (with 2x interpolation)
  • 2, 4, and 8 channel configurations
  • -70 dBc spurious free dynamic range
  • 16 bits vertical resolution
  • 2 GSample waveform memory per channel
Key features
  • Complete solution for complex RF signal generation in a single box
    • Direct generation of signals with carriers up to 4 GHz, removing the need for external RF conversion
  • Simulate real-world analog effects on high speed digital data streams
  • Generate high precision RF signals
    • Spurious Free Dynamic Range performance better than -70 dBc
  • Create long complex waveforms without compromising bandwidth
    • Up to 2 GSamples of Waveform Memory plays 400 ms of data at 5 GS/s and 800 ms of data at 2.5 GS/s

  • Synchronize multiple units to achieve a multi-channel high speed AWG system

  • Fully operational without external PC
    • Built-in display and buttons make it possible to quickly select, edit, play waveforms and trigger on events directly from the AWG front panel
  • Simulate real-world environments by playing back captured signals
    • Waveforms captured with Oscilloscopes or Real-Time Spectrum Analyzers can be played back, edited or re-sampled on the AWG

  • Smooth transition from simulation to the real-world testing environment
    • Waveform vectors imported from third-party tools such as MATLAB
Applications
  • RF/MW waveform generation for communications and defense electronics testing and development
    • Output RF signals directly up to 4 GHz

  • Leading edge research in electronics, physics & chemistry
    • High speed, low jitter signal source generates uniquely specified analog signals, fast pulses, data streams and clocks

Seamless transition from simulation to generation

If a waveform can be defined or captured, then the AWG5200 can reproduce this signal. The creation of the waveform can happen in many ways. An extensive and growing library of waveform generation plugins which are optimized to work specifically with the Tektronix AWG family, provide specific waveform creation capabilities, while 3rd party solutions like MATLAB, Excel, or others, have the flexibility to create and import any waveform you desire. Waveforms created in any of these packages can be imported and played back in the AWG5200, seamlessly transitioning from the simulation world to the real world.

Advanced remote instrument control and waveform generation

The new SourceXpress platform brings all of your AWG instrument control and waveform generation capabilities to your Microsoft® Windows PC. Load waveforms, create sequences, and enable playback without ever having to touch an AWG. All waveform creation plug-ins run natively on the SourceXpress platform, allowing you to quickly iterate through test signals without having to set foot in the lab.

AWG5200-Series-Arbitrary-Waveform-Generator-Datasheet

RF signal generation

RF signals are becoming more and more complex, making it difficult for RF engineers to accurately create the signals required for conformance and margin testing. When combined with the RF Generic waveform creation plug-in, the AWG5200 Series can address these tough design challenges. The RF Generic plug-in is a software package that digitally synthesizes modulated baseband, IF, and RF signals taking signal generation to new levels by fully exploiting the advanced signal generation capabilities of the AWG5200 Series arbitrary waveform generators.

AWG5200-Series-Arbitrary-Waveform-Generator-Datasheet

Built in digital IQ modulator

Reducing the size and cost for telecommunication and military systems is driving the evolution of modern DAC's to integrate more functionality into a single chip. Some of the more advanced high-speed DAC's also incorporate digital signal processing and conditioning functionalities such as digital interpolation, complex modulation, and numerically controlled oscillators (NCO). This enables direct generation of complex RF signals in an efficient and compact way.

The Tektronix AWG5200 series features a digital complex modulator and multi-rate interpolation. With this internal IQ modulation feature, you remove the IQ mismatches that are attributed to external modulators and mixers. Also with this modulator, there is no in-band carrier feed-through, and there are no images. With its built in interpolators, it also affords the ability to create waveforms most efficiently reducing waveform size and compilation times as well as extending playback time.

AWG5200-Series-Arbitrary-Waveform-Generator-Datasheet

Several DAC modes available

With the AWG5200 DAC there are several modes that enable you to output your signal at the cleanest portion of the DAC BW and frequency roll off positions.

AWG5200-Series-Arbitrary-Waveform-Generator-Datasheet

Environment signal generation

The mission-critical nature of many radar signals requires that they coexist with standards-based commercial signals sharing the same spectrum without performance degradation. To meet this expectation, a radar designer has to thoroughly test all the corner cases at the design/debug stage. The AWG5200 offers the extreme flexibility and precision needed to play back these worst-case scenarios.

Specifications

All specifications are typical unless noted otherwise. All specifications apply to all models unless noted otherwise.

Hardware characteristics
Number of analog outputs
AWG5202
AWG5204
AWG5208
Analog output connector type
SMA female
Analog output impedance
50 Ω
Number of marker outputs
AWG5202
AWG5204
16 
AWG5208
32 
Resolution (nominal)
16 bits with no markers active, 15 bits with 1 marker active, 14 bits with 2 markers active, 13 bits with 3 markers active, 12 bits with 4 markers active
Waveform memory
2 GS/channel
Waveform granularity
1 sample
Waveform minimum size
2400 samples
Run modes
Continuous
Waveform is continuously repeated
Triggered
Waveform is output only once after a trigger is received
Triggered Continuous
Waveform is continuously repeated after a trigger is received
Gated
Waveform is continuously repeated while the trigger is enabled
Sample rate (nominal)
300 S/s to 5 GS/s (10 GS/s Interpolated - Double Data Rate)
Sin(x)/x (-3dB)
2.22 GHz @ 5 GS/s, 4.44 GHz Interpolated @ 10 GS/s
Computer characteristics
Operating system / peripherals / IO
Microsoft® Windows OS

USB 2.0 compliant ports (2 front)

USB 3.0 compliant ports (4 rear)

RJ-45 Ethernet connector (rear panel) supports 10/100/1000BASE-T

VGA video (rear panel) for external monitor

eSATA (rear panel)

Display characteristics
LED backlit touch screen display, 165 mm (6.5 in.) diagonal, 1024 × 768 XGA
Software driver for third-party applications
IVI-COM driver

IVI-C driver

Analog output characteristics
Effective frequency output
Fmaximum (specified) is determined as "sample rate / oversampling rate" or "SR / 2.5".
2 GHz

4 GHz (Double Data Rate - DDR mode)

DC HBW output
Amplitude levels are measured as singled-ended outputs. Output doubles when using differential (both) outputs.
Amplitude range

25 mVp-pto 0.75 Vp-p(single ended, 50 Ω terminated)

50 mVp-pto 1.5 Vp-p(differential mode, 100 Ω terminated)

Amplitude accuracy (guaranteed)

±2% of setting ≥ 100 mVp-p

±5% of setting < 100 mVp-p

Offset
±2 V (50 Ω into gnd), ±4 V into DC voltage terminated
Offset accuracy

±(2% of |offset| + 10 mV); into 50 Ω to Gnd. (Common mode, guaranteed.)

±25 mV; into 100 Ω differential. (Differential mode.)

Analog bandwidth (@ 750 mVp-p)
DC to 2 GHz (-3 dB), DC to 4 GHz (-6 dB)
Rise/fall time

Rise/fall time measured at 20% to 80% levels.

< 110 ps at 750 mVp-psingle-ended

DC HBW Amplified output (option)
Amplitude levels are measured as singled-ended outputs. Output doubles when using differential (both) outputs.
Amplitude range

25 mVp-pto 1.5 Vp-p(single ended, 50 Ω terminated)

50 mVp-pto 3.0 Vp-p(differential mode, 100 Ω terminated)

Amplitude accuracy (guaranteed)

±2% of setting ≥ 100 mVp-p

±5% of setting < 100 mVp-p

Offset
±2 V (50 Ω into gnd), ±4 V into DC voltage terminated
Offset accuracy

±(2% of |offset| + 10 mV); into 50 Ω to Gnd. (Common mode, guaranteed.)

±25 mV; into 100 Ω differential. (Differential mode.)

Analog bandwidth
DC to 1.3 GHz (-3 dB), DC to 2.6 GHz (-6 dB) (at 1.5 Vp-p)
Rise/fall time

Rise/fall time measured at 20% to 80% levels.

< 180 ps at 1.5 Vp-psingle-ended

DC High Voltage output (option)
Amplitude levels are measured as singled-ended outputs. Output doubles when using differential (both) outputs.
Amplitude range

10 mVp-pto 5.0 Vp-p(single ended, 50 Ω terminated)

20 mVp-pto 10.0 Vp-p(differential mode, 100 Ω terminated)

Amplitude accuracy (guaranteed)

±2% of setting ≥ 160 mVp-p

±5% of setting < 160 mVp-p

Offset
±2 V (50 Ω into gnd), ±4 V into DC voltage terminated
Offset accuracy

±(2% of |offset| + 1% of amplitude + 20 mV). (Common mode guaranteed.)

± 88 mV; into 100 Ω. (Differential mode.)

Analog bandwidth
DC – 370 MHz (-3 dB) (at 2 Vp-p)
DC – 200 MHz (-3 dB) (at 4 Vp-p)
Rise/fall time

Rise/fall time measured at 20% to 80% levels.

< 1.3 ns, at 5 Vp-psingle-ended.

< 1.1 ns, at 4 Vp-psingle-ended.

< 0.8 ns, at 3 Vp-psingle-ended.

< 0.6 ns, at 2 Vp-psingle-ended.

AC Direct output
Amplitude levels are measured as singled-ended outputs.
Amplitude range
-17 dBm to -5 dBm
Amplitude accuracy

±0.5 dBm at 100 MHz

DC bias
±5 V at 150 mA
DC bias accuracy (guaranteed)
±(2% of bias + 20 mV); into an open circuit (zero load current)
Analog bandwidth
10 MHz - 2 GHz (-3 dB), 10 MHz - 4 GHz (-6 dB)
AC Amplified output (option)
Amplitude levels are measured as singled-ended outputs.
Amplitude range

-85 dBm to +10 dBm (10 MHz to 3.5 GHz)

-50 dBm to +10 dBm (>3.5 GHz to 5 GHz)

Amplitude accuracy

±0.5 dBm at 100 MHz

DC bias
±5 V at 150 mA
DC bias accuracy (guaranteed)
±(2% of bias + 20 mV); into an open circuit (zero load current)
Analog bandwidth
10 MHz - 2 GHz (-3 dB), 10 MHz - 4 GHz (-6 dB)
Output match VSWR
Mathematically corrected for characteristic Sin (x)/x roll-off, uncorrected by external calibration methods.
Output path Specification
DC HBW DC to 1 GHz < 1.4:1 
1 GHz to 3 GHz < 1.6:1 
3 GHz to 4 GHz < 2.0:1 
DC HBW Amplified (option) DC to 1 GHz < 1.4:1 
1 GHz to 3 GHz < 1.6:1 
3 GHz to 4 GHz < 2.0:1 
AC Direct 10 MHz to 1 GHz < 1.6:1 
1 GHz to 4 GHz < 2:1 
AC Amplified (option) 10 MHz to 2 GHz < 1.4:1 
2 GHz to 4 GHz < 1.5:1 
Bit rate
Bit rate determined as "sample rate / 4 points per cycle", allowing full impairment generation.

1.25 Gb/s at 5 GS/s

Channel timing characteristics
Channel to channel skew

±25 ps

Skew adjust
Range
±2 ns
Resolution
250 fs
Sequencer characteristics
Maximum sequencing steps
16,384 
Sub sequencing
Single level of depth
Spurious Free Dynamic Range (SFDR) characteristics
SFDR characteristics

SFDR is determined as a function of the directly generated carrier frequency.

Harmonics not included. Measured with a balun and with output amplitude set to 500 mV.

DC Direct Out
2.5 GS/s  In band performance Adjacent band performance
 Analog channel output frequencyMeasured acrossSpecification Measured acrossSpecification
100 MHz 10 – 500 MHz –80 dBc 0.01 – 1.25 GHz –72 dBc
10 – 625 MHz 10 – 625 MHz –70 dBc 0.01 – 1.25 GHz –62 dBc
0.01 – 1 GHz 0.01 – 1 GHz –60 dBc 0.01 – 1.25 GHz –58 dBc
1 – 1.25 GHz 1 – 1.25 GHz –60 dBc 0.01 – 1.25 GHz –54 dBc
5 GS/s  In band performance Adjacent band performance
 Analog channel output frequencyMeasured acrossSpecificationMeasured acrossSpecification
100 MHz 0.01 – 1 GHz –80 dBc 0.01 – 2.5 GHz –72 dBc
0.01 – 1.25 GHz 0.01 – 1.25 GHz –70 dBc 0.01 – 2.5 GHz –62 dBc
0.01 – 2 GHz 0.01 – 2 GHz –60 dBc 0.01 – 2.5 GHz –58 dBc
2 – 2.5 GHz 2 – 2.5 GHz –60 dBc 0.01 – 2.5 GHz –54 dBc
10 GS/s  In band performance Adjacent band performance
 Analog channel output frequencyMeasured acrossSpecificationMeasured acrossSpecification
100 MHz 0.01 – 1 GHz –80 dBc 0.01 – 5 GHz –72 dBc
0.01 – 1.25 GHz 0.01 – 1.25 GHz –70 dBc 0.01 – 5 GHz –57 dBc
0.01 – 2 GHz 0.01 – 2 GHz –60 dBc 0.01 – 5 GHz –57 dBc
2 – 3.5 GHz 2 – 3.5 GHz –60 dBc 0.01 – 5 GHz –54 dBc
3.5 – 4 GHz 3.5 – 4 GHz –56 dBc 0.01 – 5 GHz –50 dBc
AC Direct Out

Harmonics not included. Measured at the maximum output amplitude.

2.5 GS/s  In band performance Adjacent band performance
 Analog channel output frequencyMeasured acrossSpecification Measured acrossSpecification
100 MHz 10 – 500 MHz –80 dBc 0.01 – 1.25 GHz –72 dBc
10 – 625 MHz 10 – 625 MHz –70 dBc 0.01 – 1.25 GHz –62 dBc
0.01 – 1 GHz 0.01 – 1 GHz –60 dBc 0.01 – 1.25 GHz –58 dBc
1 – 1.25 GHz 1 – 1.25 GHz –60 dBc 0.01 – 1.25 GHz –54 dBc
5 GS/s  In band performance Adjacent band performance
 Analog channel output frequencyMeasured acrossSpecificationMeasured acrossSpecification
100 MHz 0.01 – 1 GHz –80 dBc 0.01 – 2.5 GHz –72 dBc
0.01 – 1.25 GHz 0.01 – 1.25 GHz –70 dBc 0.01 – 2.5 GHz –62 dBc
0.01 – 2 GHz 0.01 – 2 GHz –60 dBc 0.01 – 2.5 GHz –58 dBc
2 – 2.5 GHz 2 GHz – 2.5 GHz –60 dBc 0.01 – 2.5 GHz –54 dBc
10 GS/s  In band performance Adjacent band performance
 Analog channel output frequencyMeasured acrossSpecificationMeasured acrossSpecification
100 MHz 0.01 – 1 GHz –80 dBc 0.01 – 5 GHz –72 dBc
0.01 – 1.25 GHz 0.01 – 1.25 GHz –70 dBc 0.01 – 5 GHz –62 dBc
0.01 – 2 GHz 0.01 – 2 GHz –60 dBc 0.01 – 5 GHz –58 dBc
2 – 3.5 GHz 2 – 3.5 GHz –60 dBc 0.01 – 5 GHz –54 dBc
3.5 – 4 GHz 3.5 – 4 GHz –56 dBc 0.01 – 5 GHz –50 dBc
Effective number of bits (ENOB)

AWG5200-Series-Arbitrary-Waveform-Generator-Datasheet

Clock characteristics
Clock in
Connector
SMA (rear panel)
Input impedance
50 Ω, AC coupled
Frequency range
2.5 GHz to 5 GHz
Input amplitude
0 dBm to +10 dBm
Clock output
Connector
SMA on rear-panel
Output impedance
50 Ω AC Coupled
Frequency range
2.5 GHz to 5 GHz
Output amplitude
+3 dBm to +10 dBm
Sampling clock
Resolution
Up to 8 digits
Accuracy
Dependent on reference frequency accuracy
Synchronization clock output
Frequency
External clock output /32 
Amplitude
0.85 V to 1.25 V p-p into 50 Ω
Connector
SMA (rear panel)
Impedance
50 Ω, AC coupled
Trigger in
Inputs
2 (A and B)
Polarity
Pos or Neg
Impedance
50 Ω, 1 kΩ
Input range

50 Ω: <5 Vrms

1 kΩ: ±10 V

Connector
SMA (rear panel)
Threshold
Range -5.0 V to 5.0 V
Resolution 0.1 V
Accuracy ±(5% +100 mV)
Trigger Delay to Analog Output
Asynchronous 8760/ fclk +68 ns ± 20 ns
Synchronous 8275 / fclk + 30 ns ±20 ns
Asynchronous Trigger Jitter
1k Ω is selected 440 psp-p for 2.5 GHz DAC sampling clock
240 psp-p for 5 GHz DAC sampling clock
50 Ω is selected 420 psp-p, 24 psrms for 2.5 GHz DAC sampling clock
220 psp-p, 14 psrms for 5 GHz DAC sampling clock
Synchronous Trigger Jitter
Trigger synchronized to Internal or Ext Clock 300 fsrms
Trigger synchronized to Variable Reference 400 fsrms
Trigger synchronized to Fixed 10 MHz Reference 1.7 psrms
Trigger minimum pulse width
20 ns
Trigger hold-off
>2 μs
Reference in
Input amplitude
–5 dBm to +5 dBm
Fixed frequency range
10 MHz, ±40 Hz
Variable frequency range
35 MHz to 240 MHz
Connector
SMA (rear panel)
Impedance
50 Ω, AC coupled
10 MHz reference
Connector
SMA (rear panel)
Impedance
50 Ω, AC coupled
Amplitude
+4 dBm ±2 dBm
Frequency (guaranteed)
Within ±(1 ppm + Aging), Aging: ±1 ppm per year
Auxiliary outputs (Flags)
Number
AWG5202: 4 

AWG5204: 4 

AWG5208: 8 

Connector
SMB on rear-panel
Output amplitude

High 2.0 V into 50 Ω

Low 0.7 V when sinking 10 mA

Output impedance
50 Ω
Markers
Number
AWG5202: Total of 8 (4 per channel)

AWG5204: Total of 16 (4 per channel)

AWG5208: Total of 32 (4 per channel)

Marker sample rate
2.5 GS/s to 5 GS/s
Minimum pulse width
400 ps
Max data rate
2.5 GS/s
Type
Single-ended
Connector
SMA (rear panel)
Impedance
50 Ω
Output into 50 Ω
Window: -0.5 V to 1.7 V

Amplitude: 200 mV to 1.75 V

Resolution: 100 μV

Rise time
(20% - 80%): 150 ps
Skew between markers of the same channel
<25 ps
Delay control
±2 ns
Random jitter
5 ps
Pattern jump
Pin assignments
Pin  Pin  Pin  
GND GND 11  Data bit 5, input
Data bit 0, input Strobe, input 12  Data bit 6, input
Data bit 1, input GND 13  Data bit 7, input
Data bit 2, input GND 14  GND
Data bit 3, input 10  Data bit 4, input 15  GND
Input impedance
1 kΩ pull-down to GND
Input levels

3.3 V LVCMOS

5 V TTL compliant

Number of destinations
256 
Strobe polarity
Negative edge
Strobe Minimum Pulse Width
64 ns
Strobe Setup and Hold

Setup: 5 ns

Hold: 5 ns

Waveform capability
Waveform file import capability
Import waveform format by series:

.AWGX file created by Tektronix AWG5200/70000 Series

.AWG file created by Tektronix AWG5000 or AWG7000 Series

.PAT and *.WFM file formats created by Tektronix AWG400/500/600/700 Series

.IQT file format created by Tektronix RSA3000 Series

.TIQ file format created by Tektronix RSA6000/5000 Series or MDO4000 Series

.WFM or *.ISF file formats created by Tektronix TDS/DPO/MSO/DSA Series

.TXT file format

.MAT Matlab file format

.SEQX file format created by Tektronix AWG5200 Series

.SEQ file format created by the Tektronix AWG400/500/600/700 Series

.TMP or .PRM file formats; Midas Blue (Data Type 1000/1001; Scalar and complex data; 8-,16-, 32-, and 64-bit integer and 32- and 64-bit float data format types)

Waveform file export capability
.WFMX file format, AWG5200/70000 series native format

.WFM file format, AWG400/500/600/700 waveform file

.TIQ file format, RSA6000 IQ Pair

.TXT file format

Physical characteristics
Dimensions
Height
153.6 mm (6.05 in)
Width
460.5 mm (18.13 in)
Depth
603 mm (23.76 in)
Weight
AWG5202
44 lb (19.96 kg), 46.35 lb (21.02 kg) with packaging
AWG5204
45.45 lb (20.62 kg), 47.75 lb (21.66 kg) with packaging
AWG5208
50.7 lb (23 kg), 53 lb (24.04 kg) with packaging
Cooling clearance
Top
0 in
Bottom
0 in
Left side
50 mm (2 in)
Right side
50 mm (2 in)
Rear
0 in
Power supply
AC line input
100 to 240 V AC, 50/60 Hz
Consumption
750 Watts, maximum
EMC, Environment, Safety
Temperature
Operating
0 ºC to +50 ºC (+32 ºF to +122 ºF)
Non-operating
-20 ºC to +60 ºC (-4 ºF to +140 ºF )
Humidity
Operating

5% to 90% relative humidity (% RH) at up to 30 °C

5% to 45% relative humidity above 30 °C up to 50 °C

Non-condensing

Non-operating

5% to 90% relative humidity (% RH) at up to 30 °C

5% to 45% relative humidity above 30 °C up to 60 °C

Non-condensing

Altitude
Operating

Up to 3,000 meters (9,843 feet)

Derate maximum operating temperature by 1 °C per 300 meters above 1500 meters.

Nonoperating
Up to 12,000 meters (39,370 feet)
Mechanical shock
Operating
Half-sine mechanical shocks, 30 g peak, 11 ms duration, 3 drops in each direction of each axis.
Regulatory
Safety
UL61010-1, CAN/CSA-22.2, No.61010-1-04, EN61010-1, IEC61010-1 
Emissions
EN55011 (Class A), IEC61000-3-2, IEC61000-3-3 
Immunity
IEC61326, IEC61000-4-2/3/4/5/6/8/11 
Regional certifications
Europe Australia/New Zealand
EN61326 AS/NZS 2064 

Ordering information

AWG5200 family
AWG5202
16 bit, 2 GSamples/channel record length, 2-channel arbitrary waveform generator
AWG5200-225
2.5 GS/s
AWG5200-250
5 GS/s (10 GS/s interpolated)
AWG5200-2DC
High Bandwidth Amplified outputs
AWG5200-2HV
High Voltage outputs
AWG5200-2AC
AC Amplified outputs
AWG5200-2DIGUP
Digital up conversion (requires AWG5200-250)
AWG5200-SEQ
Sequencing
AWG5202-ACCY01
USB mouse, compact USB keyboard, touch screen stylus
AWG5204
16 bit, 2 GSamples/channel record length, 4-channel arbitrary waveform generator
AWG5200-425
2.5 GS/s
AWG5200-450
5 GS/s (10 GS/s interpolated)
AWG5200-4DC
High Bandwidth Amplified outputs
AWG5200-4HV
High Voltage outputs
AWG5200-4AC
AC Amplified outputs
AWG5200-4DIGUP
Digital up conversion (requires AWG5200-450)
AWG5200-SEQ
Sequencing
AWG5204-ACCY01
USB mouse, compact USB keyboard, touch screen stylus
AWG5208
16 bit, 2 GSamples/channel record length, 8-channel arbitrary waveform generator
AWG5200-825
2.5 GS/s
AWG5200-850
5 GS/s (10 GS/s interpolated)
AWG5200-8DC
High Bandwidth Amplified outputs
AWG5200-8HV
High Voltage outputs
AWG5200-8AC
AC Amplified outputs
AWG5200-8DIGUP
Digital up conversion (requires AWG5200-850)
AWG5200-SEQ
Sequencing
AWG5208-ACCY01
USB mouse, compact USB keyboard, touch screen stylus
Standard accessories1
136-7162-xx
Two 50 Ω, 18 GHz, SMA terminators per channel
071-3529-xx
Installation and safety manual (English)
Certificate of calibration
Power cord

1Specify power cord and language option at time of order

Options
Power plug options
Opt. A0
North America power plug (115 V, 60 Hz)
Opt. A1
Universal Euro power plug (220 V, 50 Hz)
Opt. A2
United Kingdom power plug (240 V, 50 Hz)
Opt. A3
Australia power plug (240 V, 50 Hz)
Opt. A4
North America power plug (240 V, 50 Hz)
Opt. A5
Switzerland power plug (220 V, 50 Hz)
Opt. A6
Japan power plug (100 V, 50/60 Hz)
Opt. A10
China power plug (50 Hz)
Opt. A11
India power plug (50 Hz)
Opt. A12
Brazil power plug (60 Hz)
Opt. A99
No power cord
Language options
Opt. L0
English manual
Opt. L5
Japanese manual
Opt. L7
Simplified Chinese manual
Opt. L8
Traditional Chinese manual
Opt. L10
Russian manual
Opt. L99
No manual
Service options
Opt. C3
Calibration Service 3 Years
Opt. C5
Calibration Service 5 Years
Opt. CA1
Single Calibration or Functional Verification
Opt. D1
Calibration Data Report
Opt. D3
Calibration Data Report 3 Years (with Opt. C3)
Opt. D5
Calibration Data Report 5 Years (with Opt. C5)
Opt. G3
Complete Care 3 Years (includes loaner, scheduled calibration, and more)
Opt. G5
Complete Care 5 Years (includes loaner, scheduled calibration, and more)
Opt. IF
Upgrade Installation Service
Opt. R3
Repair Service 3 Years (including warranty)
Opt. R5
Repair Service 5 Years (including warranty)
Post sales service options
CA1
Single calibration or functional verification
R5DW
Repair service coverage 5 years
R2PW
Repair service coverage 2 years post warranty
R1PW
Repair service coverage 1 year post warranty
Recommended accessories
Rack mount kit
GF-RACK3U
Rack mount kit
Product upgrades
AWG5202
AWG52UP Opt SSD
Provides an additional (or replacement) preprogrammed solid state drive
AWG5200-2-2550

Increases sampling rate from 2.5 GS/s to 5 GS/s (10 GS/s interpolated)

AWG5200-2DC

Adds DC High Bandwidth Amplified outputs

AWG5200-2HV

Adds DC High Voltage outputs (SN B020000 and above only)

AWG5200-2AC

Adds AC Amplified outputs

AWG5200-2DIGUP

Adds digital up conversion (requires AWG5200-250 or AWG5200-2-2550)

AWG5200-SEQ

Adds Sequencing

AWG5204
AWG52UP Opt SSD
Provides an additional (or replacement) preprogrammed solid state drive
AWG5200-4-2550

Increases sampling rate from 2.5 GS/s to 5 GS/s (10 GS/s interpolated)

AWG5200-4DC

Adds DC High Bandwidth Amplified outputs

AWG5200-4HV

Adds DC High Voltage outputs (SN B020000 and above only)

AWG5200-4AC

Adds AC Amplified outputs

AWG5200-4DIGUP

Adds digital up conversion (requires AWG5200-450 or AWG5200-4-2550)

AWG5200-SEQ

Adds Sequencing

AWG5208
AWG52UP Opt SSD
Provides an additional (or replacement) preprogrammed solid state drive
AWG5200-8-2550

Increases sampling rate from 2.5 GS/s to 5 GS/s (10 GS/s interpolated)

AWG5200-8DC

Adds DC High Bandwidth Amplified outputs

AWG5200-8HV

Adds DC High Voltage outputs (SN B020000 and above only)

AWG5200-8AC

Adds AC Amplified outputs

AWG5200-8DIGUP

Adds digital up conversion (requires AWG5200-850 or AWG5200-8-2550)

AWG5200-SEQ

Adds Sequencing

Plug-ins

Plug-ins increase the capabilities of the arbitrary waveform generators. Various plug-ins are available providing unique types of waveforms or additional compensation. Each plug-in has its own installation file which installs seamlessly into the generators. After installation, it simply becomes a new menu selection. No other configuration is necessary.

Plug-in Description Nomenclature Licensed enhancements
Multitone & Chirp plug-in Create generate chirps, notches and tones MTONENL-SS01
MTONEFL-SS01
 
PreCompensation plug-in Create correction coefficients that can be applied on waveforms to get flat frequency and linear phase response PRECOMNL-SS01
PRECOMFL-SS01
 
High Speed Serial plug-in Create pre-distorted waveforms to test a device's conformance to standards HSSNL-SS01
HSSFL-SS01
HSSPACKNL-SS01
HSSPACKFL-SS01
S-Parameters and Intersymbol Interference
Spread Spectrum Clocking (Licensed enhancements are included with HSSPACK)
RF Generic plug-in Create digitally modulated signals with multiple carrier groups RFGENNL-SS01
RFGENFL-SS01
S-Parameters
Optical plug-in Create waveforms with complex modulation schemes for optical testing OPTICALNL-SS01
OPTICALFL-SS01
S-Parameters
Spread Spectrum Clocking
OFDM plug-in Create Single or Multiple OFDM based Frames with one or more bursts OFDMNL-SS01
OFDMFL-SS01
S-Parameters
RADAR plug-in Create RADAR pulsed waveforms with various modulations and impairments RADARNL-SS01
RADARFL-SS01
S-Parameters
Environment plug-in Create real world scenarios for commercial, electronic warfare, and simulations for monitoring and receiver testing ENVNL-SS01
ENVFL-SS01
 
Spread Spectrum Clocking plug-in Adds SSC capability to the High Speed Serial and Optical plug-ins SSCFLNL-SS01
SSCFLFL-SS01
 
S-Parameters plug-in Adds S-Parameter capability to the RF Generic, High Speed Serial, Optical, OFDM, and RADAR plug-ins SPARANL-SS01 SPARAFL-SS01  

Plug-ins require the purchase of a license before they are fully functional.

There are two types of licenses available for each plug-in: node-locked (NL) and floating (FL).

  • Node Locked Licenses (NL) provide your own copy of the application on your instrument and are permanently assigned to a product model/serial number.

  • Floating Licenses (FL) can be moved between product models.

Warranty
One-year parts and labor.
Last Modified: 2018-05-18 05:00:00
다운로드
다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

Go to top