WLAN 테스트 및 분석(IEEE 802.11)

새로운 칩 세트를 테스트하거나 새로운 무선 모듈을 설계하거나 최신 설계에 WLAN 모듈을 통합하는 경우, 텍트로닉스 Wi-Fi PHY 테스트 솔루션을 통해 이러한 작업을 수행하고 설계를 시장에 더욱 신속하게 출시할 수 있습니다.

WLAN 테스트 모범 사례, 성공을 위한 사전 컴플라이언스 단계 및 텍트로닉스 솔루션으로 한 번에 성능 및 컴플라이언스 테스트를 통과하는 방법을 알아 보려면 아래 정보를 확인하십시오.


주요 콘텐츠

권장 장비


802.11 Wi-Fi 표준 포스터Wi-Fi 표준포스터를 다운 받아 최신 Wi-Fi 표준에 대해 빠르게 이해할 수 있도록 도와 드립니다.
How to Select your Wi-Fi Module

When you search for a Wi-Fi module for your application, there are many different kinds of solutions to choose from.  Read this guide on best practices for selecting the optimal Wi-Fi chipset or module for integration.

Spectrum Pre-compliance for Wireless LAN Regulatory Testing

This application note outlines the typical design cycle of using a prepackaged WLAN module and the potential pitfalls.

Wi-Fi: Overview of the 802.11 Physical Layer and Transmitter MeasurementsUse this primer to distinguish between each of the 802.11 standards, their PHY layer characteristics and their testing requirements.
Baseband Response Characterization of I-Q Modulators

This application note provides a brief theory on the sources causing the modulation error and detailed steps of how to characterize the I-Q modulator to correct for these errors.

Find out how the Tokyo Metropolitan Industrial Technology Research Institute (…


It’s useful to ensure that your ZigBee Radio RF module is turning on correctly…


Learn how to conduct wireless LAN parametric RF testing for the physical layer…


Watch this video to see how to perform a radiated EMI pre-compliance test, to…


Get RF analysis power in the palm of your hand at an unmatched price with the…


Make sure you’re getting good signal strength from your wireless LAN device by…


Neat and compact, the RSA600 USB Spectrum Analyzers works with your laptop or PC…


Learn how to perform a parametric test covered by the ZigBee standard, including…


Get the full featured spectrum analyzers you need in one small, low price package…


View this video on troubleshooting Wi-Fi modules with an MDO4000C 

Navigating the Road to WiGig

This webinar features Tektronix expert, Dorine Gurney, sharing her insights on the key factors to consider when performing transmitter testing to IEEE 802.11ad. 

Wi-Fi Pre-Compliance Measurements

If you’re integrating a WLAN radio into your design, you probably have questions on how to pass compliance tests for FCC regulations. Surprisingly, only 1 in 10 engineers pass the first time. And failing is expensive and translates to project delays.

Now our new 1-hour webinar is here with the answers you need. With its overview of today’s regulatory standards including tips for simple and easy modulation analysis, this webinar provides the insight and preparation elements you need to pass compliance testing the first time.  Join the webinar to learn about:

·         Common spectrum compliance standards

·         Resolving integration issues for WLAN radios

·         How to use an MDO4000 Mixed Domain Oscilloscope to test for transmit power, occupied bandwidth, mask test of spectrum emissions and spurious emissions

Although passing your compliance test on the first try isn’t easy, it’s not impossible. Watch this webinar to learn more.


매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

Go to top